Краткое содержание страницы № 1
LINDY LCD Terminal
User Manual English
LINDY No. 21520 - 21525
www.LINDY.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (AUG 2003)
Краткое содержание страницы № 2
Safety Information • In order to avoid the risk of fire or electric shock, DO NOT expose this device to liquid or a high humidity environment • Operate the LCD only at temperatures between +5°C and +45°C • No user serviceable parts. Refer servicing to qualified personnel • Carefully read all notes and instructions before using this product • This device should be securely mounted in 19” rack enclosure • Do not use liquid cleaning products or products containing abrasives, clean
Краткое содержание страницы № 3
User Manual KVM LCD Terminal KVM LCD Terminal INSTALLATION INSTALLING THE DRAWER INTO A 19” CABINET 1. Fix the front side panel of the drawer onto the front side of your 19” cabinet 2. Fix the screws in the back onto the rear side of your 19” Cabinet. The mounting rails may be adjusted to fit different cabinet depths of between 52cm and 90cm Cable connections 1. Ensure the computer or KVM switch you are connecting to is switched OFF! 2. Attach suitable
Краткое содержание страницы № 4
1.LC D M on itor Installation 1-1 Installation: (1) The following process offers users the best way to set up your LCD Monitor into a whole PC system with correct and safe installation. (2) Turn off the power switch of the PC and disconnect from the mains input supply. (3) Connect one end of 15-pin XGA Signal Cable to the signal input port on the LCD Monitor and the other end to the signal output port of PC (4) Connect the DC 12V power output jack to the 12V DC input socket of the LCD
Краткое содержание страницы № 5
2.Function K eys and operation : 2.1 Function Keys Definition and description: (1) Menu Key: Use this key to select and execute the magnitude and function process. The Sequence flows of Manu Key pressing: (a) Mode Selection: (+ Key) st nd rd th th Press Manu key Display 1 press 2 press 3 press 4 press 5 press OSD *OSD shows up. Colour Picture Function Manu Mics Exit . th th rd nd st 5 press 4 press 3 press 2 press 1 press (- key) (b) Adjusting-and Ex
Краткое содержание страницы № 6
(2) + Key: (a) In the Mode-Selection Mode: Pressing this key to locate forward the icon you want to adjust. Pressing it once, it moves one step forward to the next icon. Pressing it twice, it moves forward one more step to next 2nd icon. And so on. (b) Keep pressing down on this key, it flows continually through every icon and stops at the icon when the key is released. (c) In the Adjusting-and-executing Mode: The + Key, becomes the Adjusting-and-executing selection key. Pressing this
Краткое содержание страницы № 7
(f) Keep pressing down on this key, and it will keep increasing continually until the key is released. (4) Switch Power on/off Switch. (a) Press this Key once; the monitor would be turned on. (b) Press this key again and the monitor will be turned off. (c) Users are reminded that prior to press this Key to turn on the monitor, remember to switch on your PC first 5
Краткое содержание страницы № 8
2-2. Quick OSD Adjustment & Execution Operation: Key to be pressed Menu Display Remark Step 1 OSD Display Menu Key OSD Menu shows up. 1."Colour Icon” keeps flashing. 2.Mode is ready for Colour Adjustment. 3. Resolution displayed Press/Display: Colour Adjusting Mode Section 1 st + key: 1 press Image Adjusting Mode Section 2 nd + key: 2 press Function Executing Mode Section 3 rd + key: 3 press OSD Manu Mode Section 4 th + key: 4 p
Краткое содержание страницы № 9
Section 1 : C olour M ode A d justm en t Key to be pressed Menu Display Magnitude Range Step 1 Example: Contrast Contrast: 0~255 Brightness: 0~216 Red Gain: 0~255 Menu Key Green Gain: 0~255 Blue Gain: 0~255 Contrast or Brightness/ Red/Green/ Blue by 1. “Colour icon” keeps flashing. “+ key” 2. “Contrast” marked by indigo light. Step 2 Example: Contrast Menu Key 1. “Colour icon” keeps flashing. 2. “Contrast
Краткое содержание страницы № 10
Step 4 Example: Contrast Menu Key The Contrast adjustment is completed. The system is ready for next selection 1. “Colour icon” keeps flashing. 2. “Contrast” marked by indigo light. Step 5 Example: Brightness If selects: Red, Green, Blue. Repeat step 3~ 5 to +/- key complete the adjustment. To select Brightness 1. “Colour icon” keeps flashing. 2. “Brightness
Краткое содержание страницы № 11
Step 7 Example: Brightness * Keeps press the “+ key”: Value in the Scale is increasing until 216 * Keeps press +/- key the “- key”: Value in the Scale is decreasing until 0 Release the key, the value will stop at 1. “Colour icon” keeps flashing. the satisfied point. 2. “Brightness” on indigo light. Step 8 Example: Brightness Manu key Brightness adjustment is completed. The system is ready for next selection
Краткое содержание страницы № 12
Step 10 Example: Exit Manu key System backs to Mode Selection Status and is ready to select: 1. “Colour icon” keeps flashing. Step 11 +/- key Section 2 or Section 3 or Section 4 or Section 5 or Section 6 The selected icon become flashing. 10
Краткое содержание страницы № 13
Section 2: Im age M ode A d justm en t Key to be pressed Menu Display Magnitude Range Step 1 Example: H-Position H-Position: 0~146 V-Position: 0~20 Sharpness: 1/2/3/4/5 Menu Key Phase: 0~31 Clock: 0~127 H-Position or V-Position/ Sharpness/ Phase/Clock 3. “Image icon” keeps flashing. by “+ key” 4. “H-Posit.” marked by indigo light. Step 2 Example: H-Position Menu Key 4. “Image icon” keeps flashing. 5. “H-Pos
Краткое содержание страницы № 14
Step 4 Example: H-Position Menu Key H-Position adjustment is completed. The system is ready for next selection 3. “Image icon” keeps flashing. 4. “H-Posit.” marked by indigo light. Step 5 Example: V-Position If selects: Sharpness, Phase, or Clock: +/- key Repeat step 3~ 5 to complete the To select adjustment. V-Position 3. “Image icon” keeps flashing. 4. “V-
Краткое содержание страницы № 15
Step 7 Example: V-Position * Keeps pressing “+ key”: Value in the Scale is increasing until 20 * Keeps pressing +/- key “- key”: Value in the Scale is decreasing until 0 Release the key, the value will stop at 3. “Image icon” keeps flashing. the satisfied point. 4. “V-Position” on indigo light. Step 8 Example: V-Position Manu key V-position adjustment is completed. The system is ready for next selection
Краткое содержание страницы № 16
Step 10 Example: Exit Manu key System backs to Mode Selection Status and is ready to select: 1. “Image icon” keeps flashing. Step 11 +/- key Section 1 or Section 3 or Section 4 or Section 5 or Section 6 The selected icon become flashing. 14
Краткое содержание страницы № 17
Section 3: Function E xecu tion Key to be pressed Menu Display Remark Step 1 Example: Auto Configuration Manu pressed and Display: Auto Config. Menu Key Selected by +/- key: Auto Position. Auto config Auto Phase. Auto Clock. Auto Balance. Exit 5. “Function icon” keeps flashing. 6. “A. Config” marked by indigo light. Step 2 Example: Auto Configuration Menu Key 7. “Function icon” keeps flashing.. 8. Yes/No execut
Краткое содержание страницы № 18
Step 4 Example: Auto Configuration Menu Key Auto Config. is completed. The system is ready for next selection 5. “Function icon” keeps flashing. Step 5 Example: Auto-Position If selects: Auto Phase, Auto Clock or Auto +/- key Balance: Repeat step 3~ 5 to To select execute. Auto-Position 1. “Function icon” keeps flashing. 2. “Auto position” Marked on Indigo l
Краткое содержание страницы № 19
Step 7 Example: Auto-Position * Presses “+ key” to select “Yes.” * Presses “- key” to select “No.” +/- key “Function icon” keeps flashing. Step 8 Example: Auto-Position Manu key Auto-Position execution is completed. The system is ready for next selection “Function icon” keeps flashing. Step 9 Example: Exit As for Auto Phase, Auto Clock or Auto Balance: Repeat step 5~ +/- key step 8. T
Краткое содержание страницы № 20
Step 10 Example: Exit Manu key System backs to Mode Selection Status and is ready to select: “Function icon” keeps flashing. Step 11 +/- key Section 1 or Section 2 or Section 4 or Section 5 or Section 6 The selected icon become flashing. 18
