Руководство по эксплуатации Antec SOLUTIONSERIES SLK2600AMB

Краткое содержание страницы № 1

User’s Manual
Manuel de l’utilisateur
Manual del usuario
SLK2600AMB
Super Mini Tower Case
Boîtier Super Mini Tour
Super Mini Tower Case

Краткое содержание страницы № 2

Disclaimer This manual is intended only as a guide for Antec's Computer Enclosures. For more comprehensive instructions on installing your motherboard and peripherals, please refer to the user's manuals which come with your components and drives. SLK2600AMB - Super Mini Tower Case Power Supply The power supply installed in this case comes with a main power switch. Make sure you Table of Contents turn the switch to the ON ( I ) position before you boot up your computer for the first time. In

Краткое содержание страницы № 3

2. Make sure you have the appropriate I/O panel for your motherboard. If the panel 2. Consult your motherboard manual to get each of the pin-out positions. provided is not suitable for your motherboard, please contact your motherboard 3. Power Pins: There are two power pins, one on each row. They are usually marked as manufacturer for the correct I/O panel. Power, Vcc or +5V. Connect the two +5V connectors to the two power pins. Each connector can go to either pin. 3. Line up motherboard

Краткое содержание страницы № 4

Attaching the screwless Drive Rails. Figure 1. Figure 2. Data Cable Connection After you have connected the devices to the power supply, you need to connect the data cables between the devices and the motherboard. The data cables are not included with the case; we include this information only as an aid. 1. For hard drives and CD-ROM's, use the 40-pin IDE ribbon cables. For floppy drives, use the 34-pin floppy ribbon cables. These should come with your devices and have a red stripe one on s