Краткое содержание страницы № 1
CAPRESSO
ENA 3 ENA 5
ENA
ENA 4
Fully Automatic Coffee & Espresso Center
Operating Instructions
and Warranty
Customer Service 1-800-220-5701
68191
Краткое содержание страницы № 2
wall outlet. To disconnect, turn any control to “off” then IMPORTANT SAFEGUARDS remove plug from wall outlet. When using electrical appliances, basic safety precautions 12. Do not use appliance for other than intended use. should always be followed, including the following: 13. Use extreme caution when disposing hot steam. 1. Read all instructions. 14. For household use only. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and personal injury, SAVE
Краткое содержание страницы № 3
Notice: Your Jura ENA has a 3-prong grounded plug. JURA-CAPRESSO To reduce the risk of electrical shock, this plug will fit in an Jura was founded in 1931 in Switzerland. Capresso was outlet only one way. If the plug does not fit in the outlet, founded in 1994 in the USA. Both companies have joined contact a qualified electrician. DO NOT modify the plug in forces in the US to bring you the finest Fully Automatic any way. Coffee Centers available anywhere. With innovative and user-friendly featur
Краткое содержание страницы № 4
Fig. 1 1. Removable water tank with lid and Clearyl filter holder (Fig. 6 & 7) 1 2. On/Off button 2 3. Removable bean container lid 15 4. Grinder Fineness Adjustment Ring (Fig. 12 &13) 3 5. Cover for Programming and Rinse buttons (Fig. 4) 4 6. Rotary Dial with push button and illumination 5 7. Three-color alphanumeric display 8. Selector Switch for coffee, water, steam (Fig. 5) 6 9. Connector system for Dual Frother Plus and 7 frothXpress system 8 10. Dual Frother Plus (standard with all EN
Краткое содержание страницы № 5
To open Clearyl filter holder Coffee position P button Rinse button Rotary Dial Hot Water/ ENA 5 with push Steam position with button frothXpress Fig. 3 Fig. 4 Fig. 5 Fig. 6 To close Clearyl filter holder ENA 5 ENA 5 ENA 5 1-cup position Rinsing position 2-cup position Fig. 7 Fig. 8 Fig. 9 Fig. 10
Краткое содержание страницы № 6
Max: 2 spoons of pre-ground coffee Steaming Frothing up down Light roast: finer setting Dark roast: coarser setting Fig. 12 Fig. 13 Fig. 14 Fig. 15 Steam Dual Frother PLUS nozzle Tip Sleeve Rod Fig. 16 Fig. 17 Fig. 18 6.
Краткое содержание страницы № 7
Venting tip Frothing Venting tip range Milk 12 to 2 o'clock Milk Hose Hose Steam only no siphoning Steaming range 4 to 6 o'clock Chrome Nozzle MILK Fig. 19 Fig. 20 Fig. 21 Fig. 22 Turn Burr Grinder Release Tool Tablet Remove protective grinder Cappuccino slowly counter clockwise cleaning shield with Phillips screwdriver rinsing (see chapter 30) Lever Fig. 23 Fi
Краткое содержание страницы № 8
Table of Contents Chapter Page Chapter Page Important Safeguards......................................................... 2 8. Daily Preparation................................................. 14 Customer Service Information ........................................... 3 9. Grinding and brewing coffee beverages............... 14 Illustratio
Краткое содержание страницы № 9
Table of Contents Chapter Page Chapter Page 14b. Visual programming of cup size ........................... 21 23. Keeping your machine in top shape..................... 28 15. Water care............................................................. 21 24. Cleaning the bean container................................. 28 16. Water Hardness Mon
Краткое содержание страницы № 10
1. PRODUCT WARRANTY REGISTRATION a time. The two-step pressure brewing system – well known in Please remove the Product Registration from the ENA pouch, fill commercial applications – was adapted and refined by Jura it out and mail or fax it to us within two weeks after purchasing coffee specialists and is the trademark of each Jura-Capresso your machine or register your product online through our web- coffee center. This Pre-Brew Aroma-System ensures optimal site: www.capresso.com. Important:
Краткое содержание страницы № 11
machine is on you can choose between energy saving and • Café Mocha: Add chocolate syrup to milk then steam and froth always ready stand-by mode. High-end materials, a rich and add espresso. platinum metallic treatment (ENA 4 and ENA 5) and tasteful Experiment with the size of your milk based drinks. For stronger chrome accents make the ENA the highlight of any kitchen. coffee taste add more coffee, for more milk taste add more Enjoy your JURA ENA! frothed/steamed milk. 3.1 BEAN-TO-CUP / “CREMA
Краткое содержание страницы № 12
• Never fill frozen beans into the bean container. If you store Please note: You can change all above pre-sets (chapter 14a). You can also override the strengths and the cup size before/ beans in the freezer, let them thaw 3 to 4 hours before filling during actual brewing. Overriding will not change the preset them into the bean container. values (chapter 9d). • Never fill anything other than coffee beans into the bean container (no chocolate, rice, nuts, spices, etc.) Other functions are
Краткое содержание страницы № 13
• machine is NOT placed on a surface which is sensitive to enough coffee and you might get weak or no coffee at all. heat, water and steam. Before filling oily beans into the bean container pour the beans • Plug-in machine. in an open bowl and let them sit for about 5 hours. The oils will evaporate (this will not change the taste of your coffee). Then fill 6.1 TURNING THE MACHINE ON the beans into the bean container. Now beans will feed into the • Press the On/Off button on top of the machine (
Краткое содержание страницы № 14
7. ADJUSTING THE GRINDER Please note: When turning the ENA off after brewing coffee, it will The Grinder Fineness Adjustment Ring is set to a medium grind run an automatic rinse cycle. position. We recommend leaving the grinder in this position for most applications. 9. GRINDING AND BREWING COFFEE BEVERAGES Please note: You can only adjust the grinder during grinding. The coffee brewing sequence is grind, tamp, pre-brew, brew and • If you have extremely dark roasted, oily beans, set the grinder
Краткое содержание страницы № 15
9b. BREWING ONE CUP select any of these options, the display will return to READY If you press the Rotary Dial, the ENA will produce a 5 oz. cup of after approx. 7 seconds. coffee in normal strength. READY, NORMAL, 1 CUP, READY Example: To prepare a STRONG. 2 OZ espresso. READY. ENA 5 only: If you brew one cup we recommend turning the • Turn the Rotary Dial to STRONG and push the Rotary Dial. The coffee spout to the one-cup position (Fig. 9). Coffee will flow display shows STRONG and starts grin
Краткое содержание страницы № 16
READY 12. CAPPUCCINO AND LATTE • Place one or two cups under the coffee spouts. Frothing milk for Cappuccino: Injecting hot steam into the milk • Move the small lever to the front to open the chute and insert to warm the milk and create a frothy layer of tiny bubbles. the coffee funnel (Fig. 14). The display shows FILL PRE- Steaming milk for Latte: Injecting hot steam to warm the milk GROUND. without creating a frothy layer. • Add one or two scoops of pre-ground coffee, remove the The ENA 5 is
Краткое содержание страницы № 17
12a. USING THE DUAL FROTHER PLUS IMPORTANT: ENA 3 and 4 only: The Dual Frother Plus is already attached. When you are finished with frothing/steaming turn the Selector ENA 5 only: Remove the frothXpress (Fig. 20), and attach the Switch back to the coffee position. The display shows READY. Dual Frother to the steam nozzle. Make sure it is pushed up Steam output will stop. Now remove the pitcher or the cup from completely against the steam nozzle (Fig. 17). the frother. Caution: If the Dual Frothe
Краткое содержание страницы № 18
Selector Switch to the Hot Water/Steam position (Fig. 5). Let hot frothXpress with hot steam. It is necessary that all parts are water run through the frother for about 3 seconds and then stop. connected tightly, otherwise the siphoning process will not work. This will flush out any small milk droplets. Frothing Position: Point the dial between 12 and 2 o’clock. Thorough cleaning of the Dual Frother parts: Turning the dial towards the 2 o’clock position will reduce the • Remove the Dual Frother
Краткое содержание страницы № 19
Selector Switch to the coffee position. READY. 13b. HOTTER MILK WITH FROTHXPRESS • Place the cup underneath the coffee spouts and add a shot of In order to get proper froth the milk cannot be too hot, otherwise espresso. Push the Rotary Dial. 1 CUP. Once the brewing no froth will be created with the siphoning system. For most starts change the volume to 1.5 or 2.0 oz. by turning the users the milk temperature created with the dial at the 2 or 4 Rotary Dial. READY. Enjoy your Cappuccino! o’clock
Краткое содержание страницы № 20
• Place a cup underneath the frothXpress and place a cup with Push and hold the P button (Fig. 4) until display shows RINSE. some cold water next to the machine. Turn the Rotary Dial clockwise to see the following functions • Insert the milk hose into this cup (Fig. 23). after RINSE: • Point the frothXpress dial to the 12 o’clock position. READY. PRODUCT • Turn the Rotary Dial until STEAM is displayed and push the • reprogram cup size, strength and temperature to your liking, Rotary Dial. The d
