Краткое содержание страницы № 1
¨
Model No. WLEX27181
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
USER'S MANUAL
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer h
Краткое содержание страницы № 2
¨ TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 HOW TO USE THE EXERCISE
Краткое содержание страницы № 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before ¨ using the WESLO PURSUIT 675s. 1. Read all instructions in this manual before using the exercise cycle. 9. If you feel pain or dizziness at any time while exercising, stop immediately and 2. It is the responsibility of the owner to ensure begin cooling down. that all users of the exercise cycle are ade- quately informed of all precautions. Use the 10. The exercise cycle is intend
Краткое содержание страницы № 4
BEFORE YOU BEGIN ¨ Thank you for selecting the innovative WESLO through Friday, 6 a.m. until 6 p.m. Mountain Time PURSUIT 675s. The PURSUIT 675s offers a unique (excluding holidays). To help us assist you, please form of low-impact exercise that offers greater cardio- mention the product model number and serial number vascular benefits and increased muscle toning. And when calling. The model number is WLEX27181. The the 675s features adjustable resistance to let you tai- serial number can be fou
Краткое содержание страницы № 5
ASSEMBLY ¨ Place all parts of the WESLO PURSUIT 675s in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench and phillips screwdriver . PART CHART Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part; the second number refers to the quantity us
Краткое содержание страницы № 6
1. Loosen the Frame Knob (29) on the right side of the 1 Frame (1). Slide the Seat Frame (2) out until it stops. Tighten the Frame Knob. 29 1 2 2. Route the Extension Wire (56) down through the 2 57 Handlebar Post (3) and plug it into the Reed Switch 56 Wire (42). Push the Resistance Cable (57) up through the Handlebar Post. Attach the Handlebar Post (3) to the Frame (1) with 3 three M8 x 15mm Button Head Screws (53) and 53 three M8 x 19mm Washers (54). Be careful not to 53 pinch the Reed Swit
Краткое содержание страницы № 7
5. Attach the Seat Upright (64) to the Seat Frame (2) 5 with four M8 x 55mm Carriage Bolts (11) and four M8 Nylon Locknuts (55). Note: It may be helpful to tip the exercise cycle on its side to attach the Seat Upright. 55 64 55 2 11 11 6. Attach the Stabilizer (30) to the Seat Frame (2) with 6 two M8 x 70mm Carriage Bolts (27) and two M8 Nylon Locknuts (55). 55 2 30 55 27 7. Attach the Seat Bracket (63) to the Seat Upright 7 (64) with four M8 x 65mm Carriage Bolts (52) and four M8 Nylon Locknuts
Краткое содержание страницы № 8
8. Attach the Seat (44) to the Seat Bracket (63) with 8 44 four M6 x 16mm Hex Head Screws (46). 63 46 9. Attach the Seat Handles (25) to the Seat Bracket 9 25 (63) with two M8 x 100mm Hex Head Bolts (12), 26 two M8 x 16mm Washers (26), and two M8 Nylon 55 Locknuts (55). 26 12 63 25 12 10. Attach the Backrest (45) to the Seat Upright (64) 10 with four M6 x 16mm Hex Head Screws (46). 45 46 64 8
Краткое содержание страницы № 9
11. Identify the Left Pedal (39) (there is an ÒLÓ on the 11 Left Pedal for identification). Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (7). 10 Tighten the Right Pedal (not shown) clockwise into 7 39 the right arm of the Crank (7). Adjust the Pedal Strap (10) on the Left Pedal (39) to the desired position. Press the Pedal Strap onto the Adjustment Tab on the Left Pedal. Adjustment Tab Adjust the Pedal Strap on the Right Pedal (not shown) i
Краткое содержание страницы № 10
DESCRIPTION OF THE CONSOLE HOW TO OPERATE THE CONSOLE Note: The console requires two ÒAAÓ batteries. See assembly step 4 on page 6 for battery installation instructions. 1. To turn on the power, press the on/reset button or simply begin pedaling. When the power is turned on, the entire display will appear for two seconds. The console will then be ready for operation. 2. Select one of the six modes: Scan modeÑ When the power is turned on, the scan mode will auto- matically be selected. One The
Краткое содержание страницы № 11
MAINTENANCE AND STORAGE Inspect and tighten all parts of the exercise cycle reg- With the left side shield removed, locate the Reed ularly. The exercise cycle can be cleaned with a soft, Switch (42) (see the drawing below). Turn the Crank damp cloth. To prevent damage to the console, keep (7) until the Magnet (61) is aligned with the Reed liquids away from the console and keep the console Switch. Loosen but do not remove the #8 x 1/2Ó out of direct sunlight. Screw (43). Slide the Reed Switch sli
Краткое содержание страницы № 12
CONDITIONING GUIDELINES Burning Fat WARNING: Before beginning this or any To burn fat effectively, you must exercise at a relative- exercise program, consult your physician. ly low intensity level for a sustained period of time. This is especially important for individuals During the first few minutes of exercise, your body over the age of 35 or individuals withpre- uses easily accessible carbohydrate calories for ener- existing health problems. gy. Only after the first few minutes of exercise d
Краткое содержание страницы № 13
A Cool-downÑFinish each workout with 5 to 10 min- workouts. After a few months of regular exercise, you utes of stretching. This will increase your flexibility and may complete up to five workouts each week if will help to prevent post-exercise problems. desired. EXERCISE FREQUENCY Remember, the key to success is make exercise a regular and enjoyable part of your everyday life. To maintain or improve your condition, plan three work- outs each week, with at least one day of rest between SUGGESTE
Краткое содержание страницы № 14
PART LISTÑModel No. WLEX27181 R0899A Key No. Qty. Description Key No. Qty. Description 1 1 Frame 35 1 Seat Frame Bushing 2 1 Seat Frame 36 1 Frame Bushing 3 1 Handlebar Post 37 4 #8 x 1/2Ó Black Screw 4 1 Idler Arm 38 1 Right Pedal w/Strap 5 1 Idler Wheel 39 1 Left Pedal w/Strap 6 1 Drive Belt 40 1 Idler Arm Spring 7 1 Crank 41 1 ÒCÓ Magnet Spring 8 1 12Ó Pulley 42 1 Reed Switch w/Wire 9 1 Bearing Assembly 43 5 #8 x 1/2Ó Screw 10 1 Left Pedal Strap 44 1 Seat 11 4 M8 x 55mm Carriage Bolt 45 1 B
Краткое содержание страницы № 15
EXPLODED DRAWINGÑModel No. WLEX27181 R0899A 32 28 57 56 31 59 13 43 33 13 28 6 43 21 3 23 53 54 53 54 67 56 8 7 38 23 13 9 25 34 20 28 42 55 61 47 41 63 26 50 62 43 51 5 57 48 1 4 66 49 13 26 65 12 55 22 34 28 18 40 19 47 58 22 9 7 25 37 29 60 52 14 22 64 37 36 16 15 10 55 17 19 18 35 55 55 37 44 45 39 55 24 37 2 24 46 30 46 27 11 11 15
Краткое содержание страницы № 16
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give the following information: ¥ The MODEL NUMBER of the product (WLEX27181). ¨ ¥ The NAME of the product (WESLO PURSUIT 675s). ¥ The SERIAL NUMBER of the product (see the front cover of this manual). ¥ The KEY NUMBER and DESCRIPTION of the part(s) (
