Краткое содержание страницы № 1
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ELECTRIC POLE SAW
SCIE ÉLECTRIQUE DE MANCHE
ELÉCTRICA SIERRA DE PÉRTIGA
RY43160
ALL VERSIONS
TOUTES LES VERSIONS
TODAS LAS VERSIONES
Your pole saw has been engineered and manufactured to our high standard for dependability, ease of operation, and opera-
tor safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s m
Краткое содержание страницы № 2
TABLE OF CONTENTS TABLE DES MATIÈRES / ÍNDICE DE CONTENIDO Introduction .......................................................................................................................................2 Introduction / Introducción Important Safety Instructions ........................................................................................................ 3-4 Instructions importantes concernant la sécurité / Instrucciones de seguridad importantes Specific Safety Rules ..
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS Use only original manufacturer’s replacement parts. Failure to do so may cause poor perfor- WARNING: mance, possible injury, and will void your war- Read and understand all instructions. Failure ranty. to follow all instructions listed below may result Do not, under any circumstance, use any at- in electric shock, fire, and/or serious personal tachment or accessory on this product which injury. was not provided with the product or identified as appropria
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS edges, or moving parts. Replace damaged cord will cause a drop in line voltage resulting cords immediately. Damaged cords increase in loss of power and overheating. the risk of electric shock. WARNING: Use outdoor extension cords marked Make sure your extension cord is in good condi- SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW- tion. When using an extension cord, be sure to A, or SJTOW-A. These cords are rated for outdoor use one heavy enough to carry the curre
Краткое содержание страницы № 5
SPECIFIC SAFETY RULES SPECIFIC SAFETY RULES Maintain product with care. Keep cutting edge Disconnect the plug from power source when sharp and clean for best performance and to not in use, before servicing, and when changing reduce the risk of injury. Follow instructions for accessories. lubricating and changing accessories. Inspect Service on the product must be performed by cord periodically and, if damaged, have it re- qualified repair personnel only. Service or main- paired by a
Краткое содержание страницы № 6
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates a potential personal injury hazard. To reduce the risk of injury, user must read and Read the Operator’s understand operator’s manual before using this Manual product. Always wear eye protection with side shields Wear Eye and Head mark
Краткое содержание страницы № 7
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, DANGER: will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, WARNING: could result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, CAUTION: may result in minor or moderate injury. (
Краткое содержание страницы № 8
ELECTRICAL It is possible to tie the extension cord and power cord DOUBLE INSULATION in a knot to prevent them from becoming disconnected Double insulation is a concept in safety in electric during use. Make the knot as shown in figure 1, then power tools, which eliminates the need for the usual connect the plug end of the power cord into the recep- three-wire grounded power cord. All exposed metal tacle end of the extension cord. This method can also parts are isolated from the internal
Краткое содержание страницы № 9
FEATURES PRODUCT SPECIFICATIONS Bar Length ....................................................................................................................................... 8 in. Chain Pitch ....................................................................................................................................3/8 in. Chain Type ...................................................................................... Low Profile Skip Tooth Narrow Kerf Input ........................
Краткое содержание страницы № 10
FEATURES KNOW YOUR POLE SAW LOCK-OUT BUTTON See Figure 2. To help prevent accidental starting, the lock-out The safe use of this product requires an under- button must be depressed along with the switch standing of the information on the product and trigger. in this operator’s manual as well as a knowledge QUICK-VIEW OIL INDICATOR of the project you are attempting. Before use of Semi-transparent bar lube reservoir that allows this product, familiarize yourself with all operating user to s
Краткое содержание страницы № 11
ASSEMBLY BUTTON HANDLE POLE LOWER COLLAR THREADED BASE INTERMEDIATE THREADED BUTTON BASE POLE CORD POWERHEAD POLE UPPER COLLAR Fig. 3 Lower the collar on the handle pole to the threaded CONNECTING THE POLES base on the intermediate pole and rotate clock- See Figure 3. wise to secure. Before using the pole saw, a one-time assembly is Repeat this process to attach the intermediate required. When removed from the box, the three pole to the powerhead pole. poles are connected by an electric
Краткое содержание страницы № 12
OPERATION ADDING BAR AND CHAIN LUBRICANT DANGER: See Figure 4 Use Bar and Chain Lubricant. It is designed for Never cut near power lines, electric cords, or chains and chain oilers, and is formulated to other electric sources. If bar and chain jams perform over a wide temperature range with no on any electrical cord or line, DO NOT TOUCH dilution required. THE BAR OR CHAIN, THEY CAN BECOME NOTE: Pole saw comes from the factory with ELECTRICALLY LIVE AND VERY DANGEROUS! no bar and chain
Краткое содержание страницы № 13
OPERATION CONNECTING TO POWER SUPPLY See Figure 5. LOCK-OUT BUTTON This product is designed with a cord retainer that prevents the extension cord from being pulled loose while using. Form a loop with the end of the extension cord. Insert loop portion of extension cord through opening in the bottom of the rear handle and place over cord retainer. Slowly pull loop against cord retainer until the slack is removed. SWITCH TRIGGER Plug product into extension cord. NOTE: Failure to
Краткое содержание страницы № 14
OPERATION PREPARATION FOR CUTTING COLLAR See Figures 7 - 8. Wear non-slip gloves for maximum grip and protection. Maintain a proper grip on the unit whenever the motor is running. Use your right hand to firmly grip the rear handle while your left hand has a firm grip on the pole shaft. Hold unit firmly with both hands. Always keep Fig. 6 your left hand on the pole shaft and your right LOAD hand on the rear handle, so your body is to the SECOND CUT left of the chain line. Never
Краткое содержание страницы № 15
OPERATION LIMBING AND PRUNING See Figures 9 - 10. This unit is designed for trimming small branches and limbs up to 6 in. in diameter. For best results, observe the following precautions. Plan the cut carefully. Be aware of the direction in which the branch will fall. Branches may fall in unexpected directions. Do not stand directly under the branch being cut. The most typical cutting application is to posi- tion the unit at an angle of 60° or less, depend- 60° MAXIMUM ing on the spec
Краткое содержание страницы № 16
MAINTENANCE WARNING: FLATS When servicing, use only identical replacement parts. Use of any other parts could create a hazard or cause product damage. WARNING: Fig. 11 Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with head protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Before inspecting, cleaning or servicing the unit, APPROX .050 in. Fig. 12 stop the motor, wait for all
Краткое содержание страницы № 17
MAINTENANCE NOTE: New chain tends to stretch; check chain DRIVECASE CHAIN tension frequently and tension as required. COVER BAR CAUTION: Chain tensioned while warm, can be too tight upon cooling. Check the “cold tension” before BAR NUT Fig. 13 next use. CHAIN REPLACING THE BAR AND CHAIN SPROCKET TENSIONING PIN See Figures 13 - 16. WARNING: To avoid possible serious injury, stop the mo- tor and disconnect from power supply before replacing the bar, chain, or performing any DRIVECASE ma
Краткое содержание страницы № 18
MAINTENANCE CHAIN OILER See Figure 17. Use Premium Bar and Chain Lubricant. It is designed for chains and chain oilers and is formulated to perform over a wide temperature range with no dilution required. Remove the cap and carefully pour approxi- mately 2 oz. of bar and chain lubricant into the bar lube reservoir. Replace the cap and tighten securely. Check and refill the bar lube reservoir every time the pole saw is used. NOTE: Do not use dirty, used, or otherwise con- BAR
Краткое содержание страницы № 19
MAINTENANCE HOW TO SHARPEN THE CUTTERS PARTS OF A CUTTER See Figures 19 - 22. CUTTING Be careful to file all cutters to the specified angles TOP CORNER and to the same length, as fast cutting can be PLATE obtained only when all cutters are uniform. SIDE PLATE Tighten the chain tension enough that the chain DEPTH GAUGE RIVET HOLE does not wobble. Do all of your filing at the mid- point of the bar. Wear gloves for protection. HEEL Use a 5/32 in. diameter round file and holder. TOE Fig.
Краткое содержание страницы № 20
MAINTENANCE STORING THE PRODUCT See Figure 23. Clean all foreign material from the product. Store idle unit indoors in a dry, well-ventilated area that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts. SCABBARD Always place the scabbard on the saw bar when transporting or storing the pole saw. The Fig. 23 scabbard is a snug fit and must be attached very carefully due to the sharp teeth on the NOTE: The saw chain is very sha
