Краткое содержание страницы № 1
Drill & Driver
Cordless
Operating Instructions
Model No: EY6450
IMPORTANT
This manual contains safety information. Read manual completely before first using
this product and save this manual for future use.
Краткое содержание страницы № 2
Personal Safety . GENERAL SAFE- 6) Stay alert, watch what you are TY RULES - FOR doing, and use common sense when operating a power tool. Do ALL BATTERY not use tool while tired or under the influence of drugs, alcohol, or OPERATED TOOLS medication. A moment of inattention while operat- WARNING! ing power tools may result in serious READ AND UNDERSTAND ALL INSTRUCTIONS. personal injury. Failure to follow all instructions listed 7) Dress properly. Do not wear loose below, may resul
Краткое содержание страницы № 3
1 4) Do not use tool if switch does not Service turn it on or off. 2 1) Tool service must be performed A tool that cannot be controlled with only by qualified repair personnel. the switch is dangerous and must be Service or maintenance performed by repaired. unqualified personnel may result in a 1 5) Disconnect battery pack from tool risk of injury. or place the switch in the locked 2 2) When servicing a tool, use only or off position before making any identical replacement parts. F
Краткое содержание страницы № 4
8) During charging, the charger may .FOR become slightly warm. This is nor- mal. Do not charge the battery for a BATTERY CHARGER long period. & BATTERY PACK Symbol Meaning V Volts IMPORTANT SAFETY INSTRUCTIONS Direct Current 1) SAVE THESE INSTRUC- n0 no load speed TIONS - This manual contains important revolutions or …/min safety and operating instructions for reciprocation per minutes battery charger EY0110. Forward Rotation 2) Before using battery charger, read all instructions a
Краткое содержание страницы № 5
2 0) Do not abuse cord. Never carry char- RECOMMENDED MINIMUM AWG SIZE OF ger by cord or yank it to disconnect EXTENSION CORDS FOR from outlet. Keep cord away from BATTERY CHARGERS heat, oil and sharp edges. AC Input Rating. Amperes AWG Size of Cord Equal to or But less Length of Cord, Feet 2 1) Charge the battery pack in a well ven- greater than than tilated place, do not cover the charger 25 50 100 150 and battery pack with a cloth, etc., 0 2 18 18 18 16 while charging. 8) Do not operate
Краткое содержание страницы № 6
.FUNCTIONAL DESCRIPTION ( ) ( ) ( ) ( ) A B E K (I) (J) (C) (D) ( ) F ( ) H ( ) G (A) Keyless drill chuck (EY9799) (G) Battery pack(EY9251) ( ) Clutch handle ( ) Battery pack release button B H ( ) Forward / Reverse lever ( ) Battery charger (EY0110) C I ( ) Variable speed control trigger ( ) Support handle D J (E) Speed selector switch (K) Vent holes (F) Bit holder - 6 - - 7 -
Краткое содержание страницы № 7
Attaching or removing .ASSEMBLY battery pack Attaching or removing bit 1. To connect the battery pack: NOTE: Insert the battery pack. It snaps into When attaching or removing a bit, place to indicate proper connection. disconnect battery pack from tool or 2. To remove the battery pack: place the switch in the center posi- Press the two buttons on the sides tion (switch lock). of the battery pack. Slide the battery This tool is equipped with a keyless pack out of the tool body. drill chu
Краткое содержание страницы № 8
CAUTION: tion. (Using at high speed while a Do not operate Forward/Reverse strong force is applied may cause lever until the chuck comes to a com- a motor breakdown.) plete stop. Shifting during rotation of Do not operate the speed selector the chuck may damage the tool. switch (LOW-HIGH) while pulling on the speed control trigger. This Forward Rotation Switch can cause the rechargeable bat- Operation tery to wear quickly or damage the internal mechanism of the motor. 1. Push the leve
Краткое содержание страницы № 9
Battery charger (EY0110) 1. Plug the charger into the AC outlet. NOTE: Sparks may be produced when the plug is inserted into the AC power supply, but this is not a problem in terms of safety. 2. Insert the battery pack firmly into the charger. For Appropriate use of Battry pack Battery pack Ni-MH Battery pack (EY9251) To AC Charge the Ni-MH battery fully before outlet storage in order to ensure a longer ser- vice life. The ambient temperature range is be- tween 0°C (32°F) and 40°C (
Краткое содержание страницы № 10
NOTE: packs consecutively. When charging a cool battery Do not insert your fingers into con- pack (below 5°C (41°F)) in a warm tact hole, when holding charger or place, leave the battery pack at the any other occasions. place and wait for more than one CAUTION: hour to warm up the battery to the Do not use power source from an level of the ambient temperature. engine generator. Otherwise battery pack may not be fully charged. Do not cover vent holes on the charger and the battery p
Краткое содержание страницы № 11
. SPECIFICATIONS MAIN UNIT Model EY6450 Motor DC Motor 18 V LOW 70 ~ 430 /min (rpm) No load speed HIGH 240 ~ 1500 /min (rpm) Chuck capacity ø 0.5 ~ ø 13 mm (0 ~ 1/2") Approx. 2 Nm, (20 k f-cm, 18 in-lbs)~ Stage1-15 12 Nm, (122 k f-cm, 106 in-lbs) Cluch stage For powerful driving and drilling. Overall length 250 mm (9-13/16") Weight (with battery pack) 2.6 k , (5.7 lbs) BATTERY PACK Model EY9251 Storage battery Ni-MH Battery Battery voltage 18V DC (1.2V × 15 cells) BATTERY CHARGER Model EY0110
Краткое содержание страницы № 12
30-DAY QUALITY SATISFACTION GUARANTEE: If you are dissatisfied with any Panasonic Cordless Power Tool for any reason, simply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions, within 30 days of the date of purchase, for a full refund, or call Panasonic at 201-392-6655. Abuse or misapplication of any power tool voids the guarantee. PANASONIC CONSUMER ELECTRONICS COMPANY One Panasonic Way, Secaucus, N
