Руководство по эксплуатации Kidde SIRIUS TM0109

Краткое содержание страницы № 1

Sirius IIIIIIII 2, 4 & 8 ZONE FIRE ALARM PANEL

USER GUIDE


1. GENERAL

The Sirius II fire alarm panel comes in 2, 4 and 8 zone versions. The panel is mains powered and
also has two standby batteries (12 V, 7 Ah). The front panel features an LCD display, a zone window,
status windows and user controls.


2. PANEL DISPLAY

The zone windows have an alarm light (red) and a fault light (yellow) next to each zone. The panel
status windows have a single light next to each category.

Краткое содержание страницы № 2

The following features are available in Access Level 2: 3.1 The SILENCE RESOUND ALARMS button is used to silence or re-sound the alarms as required. Repeated pressing toggles between the two. In addition to silencing the sounders in the event of an alarm, this can be used to test the sounder circuits or evacuate the building as required. 3.2 The RESET button is used to reset the panel. If any fault and/or alarm conditions still exist, they will be displayed in the usual way and they

Краткое содержание страницы № 3

4. WHEN AN ALARM CONDITION OCCURS When a fire condition is detected in a zone, the relevant red zone alarm light flashes, the red ALARM light flashes, the alarm sounder circuits are activated (unless programmed off or delayed via DAY/NIGHT mode) and the buzzer on the panel sounds. The LCD display will show ZONE(number) FIRE followed by the time at which the alarm was activated. After the appropriate fire drill has been completed, to switch off the buzzer, enter Access Level 2 and

Краткое содержание страницы № 4

MAINTENANCE RECORD DATE MAINTENANCE OPERATION CARRIED OUT BY TM0109 Page 4 of 4 Rev 1