Краткое содержание страницы № 1
GB Operator’s Manual
115 02 33-26
Краткое содержание страницы № 2
SYMBOLS USED IN OPERATOR’S MANUAL: Always disconnect power before performing Visual inspection. cleaning or maintenance work. Do not use a coiled extension cord. ² Minimum wire cross-section: 1,5 mm Always use approved safety gloves. Maximum cable length: 30 m Voltage: 230 V Clean your chain saw regularly. CAUTION! Chain saws are dangerous! Careless or improper use can Use approved face mask or safety goggles. result in severe or fatal injury. SYMBOLS ON THE CHAIN SAW: Noise emission to t
Краткое содержание страницы № 3
ENGLISH CONTENTS Symbols 2 Slip clutch 11 Important! Read before using chain saw 2 Electronic overload protection 2000W 11 Contents 3 Cutting equipment 11 EC declaration of conformity 3 Chain and guide bar lubrication 12 - Chain oil 12 Technical specifi cations 4 - Filling chain oil 12 Chain saw parts 5 - Checking automatic 12 Safe use 5 chain lubrication system Starting and stopping 7 - Checking chain wear 12 Daily inspection and maintenance 7 Filing chain 13 Kickback prevention 8 Limbi
Краткое содержание страницы № 4
TECHNICAL SPECIFICATIONS Motor 1700 2000 Rated voltage VAC 220-240 230 Rated output W 1700 2000 Frequency Hz 50/60 50 Slip clutch Yes Yes Electronic start control - Yes Electronic speed control - Yes Electronic overload protection - Yes Weight Without guide bar and chain kg 4,4 4,4 With 14” guide bar and chain kg 5,1 5,1 Chain lubrication Oil tank volume litres 0.1 0.1 Oil consumption approx. litres 0.1/20 min. 0.1/20 min. Oil pump auto auto Noise levels Equ
Краткое содержание страницы № 5
ENGLISH CHAIN SAW PARTS 1. Rear handle 2. Power trigger lockout 11. Chain 3. Front handle 12. Guide bar 4. Serial No. plate 18. Chain catcher - defl ects chain in case 13. Chain brake release button 5. Chain tensioner chain breaks or derails 14. Kickback guard 6. Chain oil reservoir 19. Guide bar nut 15. Chain drive cover 7. Chain oil level 20. Nose sprocket 16. Right hand guard - protects right hand 8. Ventilation slots 21. Scabbard in case chain breaks or derails 9. Power cable 22. Combinati
Краткое содержание страницы № 6
See to it that others keep their distance as long as the Ensure that you can move and stand safely at all times. chain is in motion. Keep onlookers, children and animals Watch out for roots, stones, branches, holes, mounds away from the work area. Do not let inexperienced persons and so forth when moving around. Be par ticularly car eful handle the chainsaw or power cable. when working on slopes. Work with the trunk to your right, keeping the log between you and the guide bar . Always g
Краткое содержание страницы № 7
ENGLISH STARTING AND STOPPING CAUTION! • Make certain at all times that your footing is secure and that the chain touches nothing but the wood you are cutting. • Keep bystanders away from your work area. Starting Grip the front handle fi rmly with your left hand. Grip the rear handle fi rmly with your right hand. Press and hold the power trigger lockout button with the inside of your hand and squeeze the power trigger with your index fi nger. Stopping Stop the saw by releasing the
Краткое содержание страницы № 8
KICKBACK PREVENTION DANGER! Kickbacks occur suddenly and without warning. A kickback may be violent enough to throw a chainsaw back at the user. A running chain can infl ict severe and even fatal injury. It is imperative for users to be familiar with the causes of kickbacks in order to exercise the proper care and use working techniques to prevent kickback. CAUTION! Improperly sharpened cutters or the wrong chain and guide bar combination will increase the risk of kickback. See «Technical Spe
Краткое содержание страницы № 9
ENGLISH CHAIN BRAKE WITH KICKBACK GUARD Your chain saw is equipped with a chain brake designed to The chain brake may be activated manually or by the force stop the chain instantaneously in the event of a kickback. of inertia depending on the strength of the kickback and A chain brake can reduce the risk of accident, but only the the position of the saw in relation to the object which made operator can pr event accidents from happening. Be extremely contact with the kickback danger zone. c
Краткое содержание страницы № 10
MOUNTING GUIDE BAR AND ADJUSTING CHAIN CAUTION! Always disconnect power before performing cleaning or maintenance work. CAUTION! A loose chain can jump out of its groove during operation and cause serious or even fatal injury. 6. Replace the chain drive cover and screw the mounting nut hand tight. 1. Pull kickback guard back against the front handle to ensure that the chain brake is not applied. 7. Tension the chain by screwing the tensioning scr ew clockwise using the screwdriver tip
Краткое содержание страницы № 11
ENGLISH CHAIN CATCHER The chain catcher is designed to catch a chain which breaks or jumps out of its groove. This problem will generally be avoided, however, if the chain is tensioned properly (see chapter on «Mounting guide bar and adjusting chain» page 9) and the chain and guide bar properly maintained. Ensure that the CHAIN CATCHER is undamaged. RIGHT HAND GUARD The right hand guard protects the right hand in the event that the chain breaks or jumps out of its groove, as well as keeping
Краткое содержание страницы № 12
CHAIN AND GUIDE BAR LUBRICATION CAUTION! Inadequate lubrication can lead to cutting equipment failure and serious or fatal personal injury. Chain oil A full reservoir is suffi cient for 20 minutes of steady use. The chain and bar are lubricated by an automatic oiling system. W e recommend using only chain saw oil, which is If the lubrication system does not seem to be working, and formulated for good adhesion and fl ow characteristics in hot the following steps do not help, take your
Краткое содержание страницы № 13
ENGLISH FILING CHAIN See «Technical Specifi cations» for the details which apply to General instructions regarding cutters your chain. It is very diffi cult to fi le a chain saw correctly with- Never cut wood using a dull chain. Having to press hard is a out the proper aids. We recommend the use of a fi le guide to sure sign of a dull chain, as are very small chips. A very dull ensure maximum cutting effi ciency with the least tendency to chain will produce sawdust rather than chips. kickback
Краткое содержание страницы № 14
CROSSCUTTING Cutting a log supported at one end. The log is more than CAUTION! likely to splinter if cut straight through from the top down. If the chain becomes stuck in the kerf, STOP THE SAW! Do not attempt to jerk the saw free. You could be harmed by the chain if the saw suddenly comes loose. - Make an initial cut from below (approx. 1/3 of the Lever the saw free instead. diameter) Cutting a log on the ground. There is little danger of the saw jamming or the log splinteri
Краткое содержание страницы № 15
ENGLISH Danger zone Notch depth should be around 1/4 of the A danger zone surrounds the tree to a distance of diameter of the tree and the angle should 2 1/2 times the height of the tree. See to it that no one is be around 45°. standing within this zone while you are felling the tree. Felling direction The line defi ned by the inside angle of the When felling a tree, one always aims to place it where neither notch must be precisely horizontal and objects nor diffi cult terrain will hamper
Краткое содержание страницы № 16
Trøskenveien 36 P.O.B. 10 N - 1708 Sarpsborg Norway www.jonsered.com 115 02 33-26 ´®z+R7@¶6T¨ 2006W11 ´®z+R7@¶6T¨
