Краткое содержание страницы № 1
Variable speed
MODEL CORDLESS DRIVER DRILL
MODÈLE PERCEUSE-VISSEUSE À BATTERIE
DS 12DVF • DS 14DVF
MODELO TALADRO ATORNILLADOR A BATERÍA
DS14DVF
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use th
Краткое содержание страницы № 2
CONTENTS English Page Page IMPORTANT SAFETY INFORMATION .............. 3 ASSEMBLY AND OPERATION ............................... 14 MEANINGS OF SIGNAL WORDS ...................... 3 APPLICATIONS ................................................... 14 REMOVAL AND INSTALLATION METHOD SAFETY .................................................................... 4 OF BATTERY ................................................ 14 GENERAL SAFETY RULES – FOR ALL CHARGING METHOD ...............................
Краткое содержание страницы № 3
English IMPORTANT SAFETY INFORMATION Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures. Basic safety
Краткое содержание страницы № 4
English SAFETY GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS 1. Work Area (1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. (2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools creat
Краткое содержание страницы № 5
English 4. Tool Use and Care (1) Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. (2) Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. (3) Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must
Краткое содержание страницы № 6
English SPECIFIC SAFETY RULES AND SYMBOLS 1. Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. 2. ALWAYS wear ear plugs when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss. 3. NEVER place hands or other body parts near the drill bit or chuck during operation. Hold the dril
Краткое содержание страницы № 7
English 14. NEVER use a tool which is defective or operating abnormally. If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center. 15. Carefully handle power tools. Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed, cracked, or damaged. 16. Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner be
Краткое содержание страницы № 8
English IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER 1. This manual contains important safety and operating instructions for battery charger Model UC9SD, UC12SD and UC14SD. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. To reduce risk of injury, charge HITACHI rechargeable battery type EB1212S and EB1214L for UC12SD and EB1412S and EB1414 for UC14SD. Other type of batteries may burst causi
Краткое содержание страницы № 9
English 10. Do not operate battery charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 11. Do not disassemble battery charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire. 12. To reduce risk of electric shock, unplug charger from receptacle before attempting any maintenance or cleaning. Removing the battery will not reduce this risk.
Краткое содержание страницы № 10
English DISPOSAL OF THE EXHAUSTED BATTERY WARNING: Do not dispose of the exhausted battery. The battery must explode if it is incinerated. The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of it’s useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. SAVE THE
Краткое содержание страницы № 11
English FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety instructions contained in this manual. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool. MODEL DS12DVF: with charger (UC12SD) and case DS14DVF: w
Краткое содержание страницы № 12
English Battery Terminal Hole Terminal Hole Nameplate Latch Latch Nameplate Fig. 1 2. Battery Charger (UC12SD and UC14SD) Air vent Battery Installation Hole Cord Pilot Lamp Plug Name Caution Plate Plate Fig. 2 12
Краткое содержание страницы № 13
English SPECIFICATIONS 1. Cordless Driver Drill Model DS12DVF DS14DVF Motor DC motor No-load speed Low 0–350/min 0–400/min High 0–1050/min 0–1200/min Capacity Drilling Wood 13/16"(21mm) 1"(25mm) (Thickness (Soft Wood) (Soft Wood) 11/16" (18mm)) Metal 15/32" (12mm) 15/32" (12mm) (Thickness (Mild Steel) (Mild Steel) 1/16" 19/32" (15mm) 19/32" (15mm) (1.6mm)) (Aluminum) (Aluminum) Screw Wood screw #12 × 2-1/2" #12 × 2-1/2" Driver (5.5mm × 63mm) (5.5mm × 63mm) Small screw 1/4"(6mm) 1/4"(6mm) Drill
Краткое содержание страницы № 14
English ASSEMBLY AND OPERATION APPLICATIONS Use as a drill Drilling of soft steel, wood, plastic and aluminum materials. Use as a screwdriver Tightening and loosening of machine screws, wood screws and tapping screws. REMOVAL AND INSTALLATION METHOD OF BATTERY How to install the battery. Align the battery with the groove in tool handle and slip it into place. Always insert it all the way until it locks in place with a little click, If not, it may accidentally fall out of the tool, causing
Краткое содержание страницы № 15
English 1. Insert the battery to the battery charger. Insert the battery into the battery charger as shown in Fig. 4. Make sure it contacts the bottom of the battery charger. Battery Battery Pilot Lamp Pilot Lamp Fig. 4 2. Insert the plug of battery charger into the receptacle. WARNING: Do not use the electrical cord if damaged. Have it repaired immediately. 3. Charging When the plug of battery charger has been inserted into the receptacle, charging will commence and the pi
Краткое содержание страницы № 16
English CAUTION: Do not pull the plug out of the receptacle by pulling on the cord. Make sure to grasp the plug when removing from receptacle to avoid damaging cord. 5. Remove the battery from the battery charger. Supporting the battery charger with hand, pull out the battery from the battery charger. CAUTION: When the battery charger has been continuosly used, the battery charger will be heated, thus constituting the cause of the failures. Once the charging has been completed, wait 15 minutes
Краткое содержание страницы № 17
English OPERATION 1. Mounting and dismounting of the bit Tighten (1) Mounting the bit Insert a screwdriver bit etc. into the keyless drill chuck. Firmly grasp the ring and tighten the sleeve by turning it toward the right (in the clockwise direction as viewed from the front). (See Fig.5) NOTE: If the sleeve becomes loose during operation, tighten it further. Loosen The tightening force becomes stronger when the Ring Sleeve sleeve is tightened. Fig. 5 (2) Dismounting the bit Firmly grasp the ring
Краткое содержание страницы № 18
English 4. Change rotation speed High speed Low speed Shift knob Shift knob Fig. 7 Fig. 8 Operate the shift knob to change the rotational speed. Move the shift knob in the direction of the arrow (see Figs. 7 and 8). When the shift knob is set to “LOW”, the drill rotates at a low speed. When set to “HIGH”, the drill rotates at a high speed. CAUTION: When changing the rotational speed with the shift knob, confirm that the switch is off. Changing the speed while the motor is rotating will damage
Краткое содержание страницы № 19
English mark CAUTION: The cap cannot be set between the numbers “1, 3, 5 ... 22” or the black dot. Do not use with the cap set at the black line between the number “22” and the drill mark “ ”. Doing so may cause damage. (See Fig. 10) Black line Fig. 10 6. Tightening torque adjustment (1) Tightening torque Tightening torque should correspond in its intensity to the screw diameter. When too strong power is used, the screw head may be broken or be injured. Be sure to adjust the cap position ac
Краткое содержание страницы № 20
English THE SCOPE AND SUGGESTIONS FOR USES Table 3 Work Cap position Suggestions Wood Drilling Steel Use for drilling purpose. Aluminum Machine Use the bit and socket matching the screw 1 – 22 screw diameter. Screw Wood tightening 1 – Use after drilling a pilot hole. screw HOW TO SELECT TIGHTENING TORQUE Table 4 Cap Tightening torque Operation example position 1 Approximately 9 in-lbs. (10 kg-cm) Machine screw tightening 3 Approximately 15 in-lbs. (17 kg-cm) Screw tightening for soft 7 Approxima
