Руководство по эксплуатации Harbor Freight Tools 97092

Краткое содержание страницы № 1

HigH REACH ROPE
CHAin sA w
Model 97092
sEt uP And OPERA ting instRuCtiOns
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
distributed exclusively by Harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
sAVE tHis MAnuAl.

Краткое содержание страницы № 2

5. Do not overreach. Keep proper footing and balance at all times. Do not use this product on a ladder. This enables better control of the Chain Saw in unexpected situations. 6. store idle Chain saws out of the reach of children and do not allow per - sons unfamiliar with the tool or these instructions to operate it. 7. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 8. Always stand to one

Краткое содержание страницы № 3

5. Move as far away from the cutting area as the Extension Ropes allows. Con- nect the Handles (1) to the ends of the Extension Ropes. Longer ropes of the same gauge as the Extension Ropes can be attached to the Chain Saw so that higher limbs can be cut and/or the user can be a safe distance away from the limb being cut. 6. Cut at a 45° angle by pulling the Extension Ropes alternately with each hand. As the Chain is pulled it will automatically orient itself to cut the limb. 7. Cutti

Краткое содержание страницы № 4

MAintEnAnCE And sERViCing damaged equipment can fail, causing serious personal wARning injury. do not use damaged equipment. 1. BEFORE EACH usE, inspect the general condition of the tool. Check for loose fittings, frayed ropes, cracked or broken parts and any other condition that may affect its safe operation. 2. Have Chain Saw sharpened by a qualified service technician. 3. AFtER usE, clean external surfaces of the tool with clean, moist cloth. Apply light machine oil before storage. P