Краткое содержание страницы № 1
D
™
Deluxe Healthy Care
High Chair
Product features and decoration may vary from the photo above.
Model Number: B2105, B0326
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tool needed for assembly: Phillips Screwdriver (not included).
i
s
c
o
v
e
r
w
h
a
t
’
s
p
o
s
s
i
b
l
e
™
…
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
Краткое содержание страницы № 2
Warnings and Caution Consumer Information Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, WARNING rather than return this product to the store. Usually, we can solve the problem over the telephone or send you replace- ment parts. Please call Fisher-Price® Consumer Relations, Prevent serious injury or death toll-free at 1-800-432-5437,8 AM - 6 PM EST Monday from falls or sliding out. through Friday. Hearing-impaired consu
Краткое содержание страницы № 3
Parts Headrest 3 Food Trays Pad Seat Back Base Tray Seat Bottom Frame 7 Hinge #10 x /8" Rod Black Screw Storage Caddy 3 #8 x /4" Screws 2 Seat Bottom Tubes 3 #8 x /4" 4 Screw Retainers Screws 7 #10 x /8" 3 Black Screw - 4 #8 x /4" Screws Frame Footrest Back Base 4 Wheels 7 3 #10 x /8" #8 x /4" Screw - 8 Black Screws SHOWN ACTUAL SIZE Front Base 7 #10 x /8" Black Screw - 7 SHOWN ACTUAL SIZE 3
Краткое содержание страницы № 4
Assembly IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Seat Footrest Bottom Plastic Tubes Rings Seat Bottom Plastic Rings 3 •Align the holes in the plastic 1 rings and the seat bottom tubes. 3 #8 x /4" Screw - 4 3 • Insert a #8 x /4" screw through SHOWN ACTUAL SIZE each plastic ring a
Краткое содержание страницы № 5
Assembly Frame Leg Seat Back Seat Back Pin Pin Opening Opening 7 Seat Bottom Assembly •Pull the frame leg out on each frame to open. Make sure it 5 “clicks” into place. Short Leg •Turn the seat bottom assembly upright. Tube •Fit the seat back pins into the openings in the top side of the seat bottom assembly. 7 #10 x /8" Black Screw Back Base SHOWN ACTUAL SIZE Hinge Long Tapered Leg Tube Hinge Rod 8 Front Base 6 • Identify the back and front base. The back base has short leg •Turn the seat assem
Краткое содержание страницы № 6
Assembly Frame Decorated Side Seat Height Adjusters Position 4 Frame Back Legs Press Lever 10 Back Base Hole •While pressing the levers on the seat height adjusters, lift Screw them to position 4 on the frame front legs, as shown. Retainers 9 Back Base Hole Seat Assembly 7 #10 x /8" Black Screw - 2 Screw Retainer - 2 SHOWN ACTUAL SIZE •Position a frame so that the decorated side is outward. Sockets Sockets • Insert the back leg of a frame into the back base. •Fit a screw retainer over the hole i
Краткое содержание страницы № 7
Assembly Push Push Seat Seat Height Height Adjuster Adjuster Front Leg Hole Seat Bottom 13 Tube Ends Screw Retainers 3 #8 x /4" Screw - 2 •Push each seat height adjuster SHOWN ACTUAL SIZE Front Leg Hole to be sure they are completely on the seat bottom tubes. 3 • Insert a #8 x /4" screw through each seat height adjuster and the ends of the seat bottom tube. •Tighten the screws with a Phillips screwdriver. Front Base Do not over-tighten. 12 3 #8 x /4" Screw - 2 SHOWN ACTUAL SIZE 7 #10 x /8" Bla
Краткое содержание страницы № 8
Assembly Pad Front Base Holes Elastic Loops Wheels Wheels Hole Hole Back Base Holes 15 Bottom View Wheel •Tip the assembly so that Peg the back of seat is flat 16 on the floor and the front and back bases are facing up. • Insert and “snap” the peg Hole on a wheel into each of the four holes in the front and back bases. Tabs Hint: To remove the wheels from the front and back base, simply pull and remove. Store the wheels in a safe place for future use. Elastic Loops Back and Bottom View • Lift
Краткое содержание страницы № 9
Assembly Slot Crotch Belt Pad Bottom Slots 19 • Lift the top of the pad. 17 •Thread the waist/shoulder belts through the bottom slots in the back of the seat pad. • Insert the crotch belt through the slot in the pad. Make sure the crotch belt is not twisted. Upper Shoulder Belt Slots Lower Shoulder Shoulder Belt Slots Portion Headrest Pad Slots Shoulder Portion 20 •Fit the top of the pad over the seat back. •Fold the bottom edge of the pad under the edge of the 18 seat bottom to fasten it. •Fi
Краткое содержание страницы № 10
Assembly Headrest Pad Strap Handle Elastic Elastic Loop Loop Tab Belt Tab Ends 21 23 Back View •Fit the strap on the top of the headrest through the handle. •From behind the seat, be sure the shoulder portion of the waist/shoulder belts are secure in the seat back slots. • Hook the elastic loops on each side of the pad onto the tabs in the seat back. Pad Handle Headrest Strap Strap Small Fastener Storage Caddy Frame Tab Large Fastener 22 24 Back View •Fit the pad strap through the handle and pre
Краткое содержание страницы № 11
B A A Securing Your Child IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp Anchored Anchored edges. DO NOT use if any parts are missing or broken. End End Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. B Free End Free End WARNING Buckle 2 Prevent serious injury or death Tighten Loosen from falls or sliding out. The child should be secured in To tighten the waist belts: the high chair a
Краткое содержание страницы № 12
Securing Your Child Using the Trays WARNING Prevent serious injury or death from falls or sliding out. The child should be secured in the high chair at all times by the restraining system, either in the recline, semi-recline or upright position. The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair. 4 Base Tray To change shoulder belt slots: •From the back of the high chair, push the shoulder portion of the waist/shoulder belts th
Краткое содержание страницы № 13
Using the Trays Hint: The base tray can be adjusted for your child’s comfort Hint: The base tray can be removed two ways (see steps two ways (see steps 7 and 8)! 9 and 10)! Base Tray Base Tray Squeeze Squeeze Latch Latch Release Bar 9 7 • Squeeze one or both of the latches underneath the base •While pushing the release bar on the front of the base tray, tray and lift. adjust the base tray forward or backward. Base Base Tray Tray Squeeze Squeeze Latch Latch Release Bar 8 10 •While squeezing the
Краткое содержание страницы № 14
Using the Trays Using the Brakes WARNING Food Tray Prevent serious injury or death from falls or sliding out. • Always leave wheels locked. •Never use near stairs. Base Tray 11 •Fit the food tray into the base tray, as shown. Hint: Before use, thorougly wash all parts (the trays) that may contact food. Wheels Tab Tab 12 Lift Press Tab Tab Lock Unlock TO LOCK: Press the tab on all four wheels down until you hear a “snap”. TO UNLOCK: Lift the tab on all four wheels up. 14
Краткое содержание страницы № 15
Adjusting the Seat Hint: Adjust the seat angle to any of three positions: Upright, WARNING Semi-Recline or Recline. Prevent serious injury or death Upright from falls or sliding out. Semi-Recline It is recommended that the high chair be used in the upright position Recline only by children capable of sitting upright unassisted. Hint: Adjust the seat height to any of seven positions! Seat Height Adjuster 14 To adjust the seat angle: Press Lever •Squeeze the seat back handle and push the seat bac
Краткое содержание страницы № 16
Storage Care •The pad and headrest are machine washable. Wash the pad and headrest separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. •The frame and base tray may be wiped clean using a mild cleaning solution and a damp cloth. Do not immerse the base tray. •The food trays are dishwasher safe. Simply remove the food tray from the base tray and place in your dishwasher. To remove the pad: Base Tray •Remove the four elastic loops
