Руководство по эксплуатации Euro-Pro SC620

Краткое содержание страницы № 1

OWNER’S MANUAL
Garment Steamer
Model SC620
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
1-800-798-7398
www.euro-pro.com
E U R O − P R O

Краткое содержание страницы № 2

Model SC620 IMPORTANT SAFETY INSTRUCTIONS When using your EURO-PRO Garment Steamer, basic safety precautions 1 YEAR LIMITED WARRANTY should always be observed, including the following: EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use by the original 1. Read all instructions before using your To reduce the risk of fire, electric shock, or purchaser only.

Краткое содержание страницы № 3

IMPORTANT NOTES DURING OPERATION ADDITIONAL IMPORTANT SAFEGUARDS cont. If steamer hose gurgles during use: If the steamer stops producing • This is a normal result of steam then starts again: 1. To avoid circuit overload, do not operate another appliance on the same socket (circuit) condensation collecting inside the • You may wish to examine the 2. If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be used. hose. Simply lift the steam inside of the reservoir. T

Краткое содержание страницы № 4

OPERATING INSTRUCTIONS cont. FEATURES OF YOUR GARMENT STEAMER Step 3: Using Garment Steamer cont. 3. After the unit has cooled down, 1. The steam diffuser/handgrip at the remove the water tank and empty end of the steamer hose is located 4. Once steam is being released the water remaining in the water from the steam diffuser with the just behind the garment brush. By tank in a sink. Rinse the water garment brush attached, hold grasping the steam diffuser/handgrip tank and set aside to

Краткое содержание страницы № 5

OPERATING INSTRUCTIONS cont. GETTING TO KNOW YOUR GARMENT STEAMER Preparing Garment 3. After filling the water bottle, close the cap clockwise. (See fig. 8) Steamer for Use CAUTION: Before filling the water tank, check to make sure that the water tank sits securely in the unit before proceeding. Step 1: Preparing for Use 1. Unwind the power cord. 2. Check the wheels to see that they swivel and roll properly. 3. Set the unit on the floor and remove the water tank. Check for sediment or

Краткое содержание страницы № 6

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS cont. Components 3. To attach the garment brush Step 2: Assembling Steamer Hose 2. To assemble the garment rod, insert (marked E) onto the diffuser Power “On” Light (green): This light one of the extensions into the other by (marked F), place the two hinges 1. Insert end of steamer hose with the will illuminate when the “ON” switch is depressing the button on the extension at the back of the garment brush long tube bushing (marked A) into