Краткое содержание страницы № 1
Operator's Manual
®
STOP
44" HigH Speed Sweeper
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Model No. 486.24029
Questions Call 1-866-576-8388
CAUTiON:
• Safety
Before using this product, read
• Assembly
this manual and follow all Safety
• Operation
Rules and Operating Instructions.
• Maintenance
• Parts
Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com
PRINTED IN U.S.A. FORM NO. 41949 rev. (11/11/11)
Краткое содержание страницы № 2
TABLe OF CONTeNTS WARRANTY ....................................................................2 MAINTENANCE ............................................................11 SAFETY RULES ..............................................................3 STORAGE .....................................................................11 CARTON CONTENTS .....................................................3 SERVICE AND ADJUSTMENTS ...................................12 HARDWARE PACKAGE .....................
Краткое содержание страницы № 3
SAFeTY r ULeS Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. • Read the vehicle and sweeper owners manuals and know how to operate your vehicle and sweeper before using this sweeper attachment. Always instruct other users before they operate the sweeper. • Vehicle braking and stability may be affected with the addition of an accessory or an attach
Краткое содержание страницы № 4
HArdw Are p ACKAge SHOWN FULL SIZE 21 24 25 (x9) (x6) (x2) 15 16 39 17 26 47810 43178 47189 (x7) (x1) (x2) (x2) (x5) 23 (x2) 22 (x2) 43182 43978 44917 43661 42 68 (x2) 23368 (x2) 18 43648 (x1) 27 19 (x2) (x3) 47605 1540-107 43 44292 (x2) 28 (x2) 48365 20 43088 (x1) 43093 43055 43343 47623 NOT SHOWN FULL SIZE 30 32 (x2) (x2) 29 34 35 (x1) (x1) (x1) 41036 26484 33 31 (x1) (x2) 7071 23878 43193 41013 23353 4
Краткое содержание страницы № 5
ASSeMBLY TOOLS reQUired FOr ASSeMBLY STep 3: (See FigUre 3) • Secure each bag arm channel to the side of the sweeper housing with a wing nut (31) and a washer (2) 7/16" Wrenches (43) installed on the bolt assembled in step 1. (2) 1/2" Wrench • Insert a pivot rod retainer (30) down into the end of (1) Pliers each bag arm channel. (1) Hammer • Install a compression spring (32) into the bottom of each of the pivot rod retainers to secure them to the bag arm channels. STep 1: (See FigUre
Краткое содержание страницы № 6
STep 5: (See FigUre 5) STep 7: (See FigUre 7) • Lock the drawbar into position by inserting a 3/8" x • Slide the bag fr ame tube (1) through the front flap in 3" pin (20) into the center hole and securing it with a the bottom of the bag. small 3/32" hairpin cotter (19). • Slide the tw o lo w er hopper tubes (10) into the flaps at the front of the hopper bag (3) as shown. 3 20 19 10 1 FigUre 5 FigUre 7 STep 8: (See FigUre 8) STep 6: (See FigUre 6) • Install a rear hopper tube (11) onto
Краткое содержание страницы № 7
STep 9: (See FigUre 9) STep 11: (See FigUre 11) • Slide the front flaps of the hopper bag up onto the • Slide the assemb led tubes do wn through the flaps in front of the lower hopper tubes. Secure the bag frame the sides of the hopper bag (3) as shown. tube to the lower hopper tubes using two clevis pins (28) and small hairpin cotters (19). NOTe: Be sure front flaps of hopper bag are positioned above clevis pins. • Snap the sides of the bag to the bottom of the bag at the front corne
Краткое содержание страницы № 8
STep 13: (See FigUre 13) STep 15: (See FigUre 15) 1. Secure the top and bottom hopper tubes together • Insert the hopper support rods (7) into the hole using two 5/16" x 3/4" hex bolts (17) on inside the beneath the curved head bolt (26) in each upper hopper bag and two 5/16" nylock nuts (21) outside. hopper tube. Flex and insert the rod into the hole in the bottom rear hopper tubes as shown. NOTe: The hopper suppor t rods will fle x about as m uch as sho wn in figure 15 when the y are as
Краткое содержание страницы № 9
STep 17: (See FigUre 17) ATTACHiNg Sweeper HiTCH TO TrACTOr • Slide the handle grip (29) onto the end of the handle 1. Place the tr actor and s w eeper on a flat le v el surf ace . tube (9). 2. Set the sweeper height adjustment handle to about • Assemble the handle tube (9) to the dump tube (5) the middle of its adjustment range. and secure in place with a 1/4" x 1" curved head bolt 3. Attach the sweeper hitch to the tractor hitch, making (26) and 1/4" nylock nut (24). adjustments t
Краткое содержание страницы № 10
OperATiON (Sweeper SHO wN iN dUMp pOSiTiON) DUMP HANDLE PIVOT ROD DRAWBAR OFFSET DRAWBAR TUBE BAG ARM CHANNELS KNOB HEIGHT ADJUSTMENT HANDLE dump Lever Permits dumping of the hopper bag from the driver's seat. Bag Arm Channels Connects the hopper bag to the sweeper housing. pivot rod Allows the hopper bag to tilt forward to dump material. Height Adjustment Handle Adjusts the operating height of the sweeper. Knob Locks the height adjustment handle into a height adjustment hole. drawbar
Краткое содержание страницы № 11
MAiNTeNANCe CUSTOMer reSpONSiBiLiTieS Read and follow the maintenance schedule and the procedures listed in the maintenance section. MAINTENANCE SCHEDULE Fill in dates as you Service Dates complete regular service. Check for loose fasteners X Check for worn or damaged parts X X Lubricate brush shaft bearings X Lubricate wheel bearings X Clean Sweeper X X Clean, inspect and lubricate gears X SCHedULed MAiNTeNANCe CLeANiNg • Clean the sweeper after each use. • Cl
Краткое содержание страницы № 12
BRUSH ROTATION OVERLAP BRISTLES DO NOT REMOVE DOUBLE THIS BOLT BRUSH RETAINER SINGLE OVERLAP BRUSH BRISTLES RETAINER (2) Ser ViCe ANd AdJUSTMeNTS Br USH repLACeMeNT geAr ANd driVe piN Ser ViCe NOTe: Replace brushes one brush at a time. iMpOr TANT: do Not remove both wheels at the same 1. Remove the hopper bag from the sweeper. time to avoid mixing of parts. (The pinion gears are not 2. Loosen hex bolts and lock nuts on two single brush interchangeable. The ratchet end of the gears is marked r
Краткое содержание страницы № 13
NOTeS 13
Краткое содержание страницы № 14
rep Air p Ar TS 486.24029 44" HigH Speed Sweeper 24 To order replacement parts, call Sears Parts Direct 1-800-252-1698 34 or go to www.searspartsdirect.com 16 5 3 29 26 9 24 27 26 42 42 24 11 6 26 7 24 23 6 24 30 32 26 2 30 33 54 21 11 32 10 55 57 17 23 4 19 4 53 67 7 52 43 67 25 28 24 41 15 39 69 65 39 65 40 15 17 46 41 26 48 25 47 21 48 10 49 21 50 51 1 19 43 62 24 21 59 63 31 44 61 43 37 66 28 56 58 60 38 40 20 69 65 65 15 56 66 41 15 15 15 35 52 57 8 51 67 31 43 50 48 68 53 14 48 49 13 36 67
Краткое содержание страницы № 15
rep Air p Ar TS 486.24029 44" HigH Speed Sweeper To order replacement parts, call Sears Parts Direct 1-800-252-1698 or go to www.searspartsdirect.com reF QTY pAr T NO deSCripTiON reF QTY pAr T NO deSCripTiON 1 1 42020 Bag Frame Tube 36 1 67193 Sweeper Housing 2 1 41041 Pivot Rod 37 1 67333 Height Adjustment Tube 3 1 40890 Hopper Bag 38 1 40891 Height Adjustment Knob 4 2 26414 Bag Arm Channel 39 2 43661 Hex Bolt, 1/4-20 x 1" 5 1 40989 Dump Tube 40 2 41570 Dust Cover 6 2 40892 Upper Hopper Tube 41
Краткое содержание страницы № 16
To order replacement parts, call Sears Parts Direct 1-800-252-1698 or go to www.searspartsdirect.com
