Краткое содержание страницы № 1
1/2” Heavy-duty Low
Speed vSR dRiLL
Model 93632
Set up and opeRating inStRuctionS
visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
Save tHiS ManuaL.
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this m
Краткое содержание страницы № 2
caution, without the Save tHiS ManuaL safety alert symbol, is Keep this manual for the safety warnings used to address practices not and precautions, assembly, operating, inspec- related to personal injury. tion, maintenance and cleaning procedures. Write the product’s serial number in the back general power t ool Safety warnings of the manual near the assembly diagram (or waRning Read all safety warnings month and year of purchase if product has no and instructions. Failure to follow
Краткое содержание страницы № 3
c. do not expose power tools to rain or d. Remove any adjusting key or wrench wet conditions. Water entering a power before turning the power tool on. A tool will increase the risk of electric wrench or a key left attached to a rotat- shock. ing part of the power tool may result in personal injury. d. do not abuse the cord. never use the cord for carrying, pulling or unplug- e. do not overreach. Keep proper foot- ging the power tool. Keep cord away ing and balance at all times. This f
Краткое содержание страницы № 4
storing power tools. Such preventive contact hidden wiring or its own cord. safety measures reduce the risk of start- Contact with a ″live″ wire will make ex- ing the power tool accidentally. posed metal parts of the tool ″live″ and shock the operator. d. Store idle power tools out of the reach of children and do not allow per- 3. Let Bits cool before touching, chang- sons unfamiliar with the power tool ing or adjusting them. Bits heat up or these instructions to operate the dramatically
Краткое содержание страницы № 5
• Properly maintain and inspect to avoid vibration Safety electrical shock. This tool vibrates during use. Repeated • Any power cord must be properly or long-term exposure to vibration may grounded. Ground Fault Circuit Inter- cause temporary or permanent physical rupter (GFCI) should also be imple- injury, particularly to the hands, arms and mented – it prevents sustained electrical shoulders. To reduce the risk of vibra- shock. tion-related injury: 12. Some dust created by power san
Краткое содержание страницы № 6
abnormal vibration occurs, stop use the tool should electrically malfunction or immediately. break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of elec- Save tHeSe tric shock. inStRuctionS. (See 3-prong plug and outlet.) 2. The grounding prong in the plug is con- gRounding nected through the green wire inside the cord to the grounding system in the tool. t o pRevent The green wire in the cord must be the eLectRic SHocK o
Краткое содержание страницы № 7
2. Double insulated tools may be used in 8. Protect the extension cords from sharp either of the 120 volt outlets shown in the objects, excessive heat, and damp or preceding illustration. wet areas. (See outlets for 2-prong plug.) RecoMMended MiniMuM wiRe gauge FoR eXtenSion coRdS* extension cords (120/240 voL t) eXtenSion coRd 1. Grounded tools require a three wire naMepLate LengtH extension cord. Double Insulated tools aMpeReS can use either a two or three wire exten- (at full load)
Краткое содержание страницы № 8
SpeciFicationS unpacKing When unpacking, make sure that the Electrical Requirements 120 V~ / 60 Hz / 7.5 A item is intact and undamaged. If any parts Motor No Load Speed 0 - 550 RPM are missing or broken, please call Harbor 2” Wood, Drilling Capacity Freight Tools at the number shown on the 1/2” Mild Steel cover of this manual as soon as possible. Chuck 1/2” Capacity, Keyed Chuck Spindle 1/2” 20 UNF 39LH e194601 Rev 09l Page 8 For technical questions, please call 1-800-444-3353. SKU 93632
Краткое содержание страницы № 9
Features inStRuctionS FoR putting Side Spade into uSe Handle Handle Read the entiRe iMpoRtant SaFety inFoRMation section at the beginning of this manual including all text under chuck subheadings therein before set up or use of this product. t o pRevent t rigger Lock SeRiouS injuR y FRoM accidentaL direction Switch opeRation: t urn the t rigger of the tool to its Speed control t rigger “oFF” position and unplug the tool from its electrical outlet This tool incorporates a double g
Краткое содержание страницы № 10
Key with the gear teeth on the outside opeRating inStRuctionS of the Chuck. Turn the Chuck Key clock- Read the entiRe iMpoRtant wise to tighten the jaws of the Chuck SaFety inFoRMation firmly on the drill bit. section at the beginning of this caution: Make sure the drill bit is centered manual including all text under and firmly fixed in the Chuck before be- subheadings therein before set up ginning work. or use of this product. t ool Set up - installing drill Bits t o pRevent SeRiouS
Краткое содержание страницы № 11
general operating instructions note: The motor will heat up as it is used. To avoid motor burn out, do not use continu- ally for more than 20 minutes at a time. Allow the tool to cool down for at least 10 minutes before resuming work. 1. The Trigger (46) has a variable speed feature. Simply turn the dial below the Trigger to adjust the drill speed. The dotted lines on the dial are spaced from narrow to wide to indicate increasing drill speed. 2. The trigger lock button on the side of t
Краткое содержание страницы № 12
Maintenance and inSpection 1. The Armature (25) and Stator (29) comprise the main part of the tool. Protect these electrical components from moisture or oil intrusion. 2. Inspect the Carbon Brushes (34) regularly. Replace them is they are more than 1/3 worn or are chipped or cracked. When handling them, be careful not to damage them. To reduce wear after inspection, replace them in exactly the same way as they were removed. 3. Regularly inspect all components and fasteners to be sure
Краткое содержание страницы № 13
t roubleshooting 1. drill operates but hole is not effectively drilled. a. Possible Cause: Inappropriate or dull drill bit. Solution: Try a different drill bit. 2. drill will not turn on. a. Possible Cause: No power source. Solution: Check that the power cord is plugged into an appropriate live outlet. Check that power cord is in good condition. b. Possible Cause: Damaged Carbon Brushes. Solution: Unplug tool. Remove and inspect Carbon Brushes. If glazed, they can be cleaned with a p
Краткое содержание страницы № 14
pLeaSe Read tHe FoLLowing caReFuLL y The MANUf ACTUReR AND/oR DISTRIbUT oR hAS PRovIDeD The PARTS LIST AND ASSeMbL y DIAgRAM IN ThIS MANUAL AS A RefeReNCe TooL oNL y. NeITheR The MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY of ANy kIND To The bUyeR ThAT he oR She IS qUALIfIeD To MAke ANy RePAIRS To The PRoDUCT , oR ThAT he oR She IS qUALIfIeD To RePLACe ANy PARTS of The PRoDUCT . IN f ACT, The MANUf ACTUReR AND/oR DISTRIbUT oR exPReSSL y STATeS ThAT ALL RePAIRS AND PA
Краткое содержание страницы № 15
aSSeMBL y dRawing SKU 93632 For technical questions, please call 1-800-444-3353. Page 15
Краткое содержание страницы № 16
To take advantage of this warranty, LiMited 90 day waRRanty the product or part must be returned to us Harbor Freight Tools Co. makes every with transportation charges prepaid. Proof effort to assure that its products meet of purchase date and an explanation of the high quality and durability standards, and complaint must accompany the merchandise. warrants to the original purchaser that this If our inspection verifies the defect, we product is free from defects in materials and will eith
