Руководство по эксплуатации La Crosse Technology Radio Controlled Projection Alarm WT-5350

Краткое содержание страницы № 1

WT-5350
Radio Controlled Projection Alarm
Instruction Manual
RADIO CONTR OLLED
FCC ID: OMO-01RX (receiver)
DATE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
AL/SEL MODE/ +
PROJECTION
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
R
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Contents
Language Page
English 2
Français 31
Spanish 61

Краткое содержание страницы № 2

TABLE OF CONTENTS Features & Operations Topic Page Features 16 Inventory of Contents 4 Radio-Controlled Time and Date 16 About WWVB 5 Projection 18 Quick Set-Up Guide 6 EL. Back light 19 Detailed Set-Up Guide Time Alarm 20 Battery Installation 7 Changing Display Mode 22 Program Mode Maintenance & Care 23 Programming Sequence 10 Troubleshooting 24 Function Buttons 11 Specifications 25 Time Zone Setting 11 Warranty and Contact Information 26 Time Setting 12 Date Setting 13 12/24-Hour Mode 14 DST (

Краткое содержание страницы № 3

a tone will sound for every second. It is possible that your Projection Alarm may not DETAILED SET-UP GUIDE be exactly on the second due to the variance in the quartz. However, the clock will adjust the quartz timing over the course of several days to be very accurate; under . BATTERY INSTALLATION 10 seconds per day. 1. Remove the battery cover. 2. Observe the correct polarity and install 2 AA batteries. QUICK SET-UP GUIDE 3. In addition or instead of inserting batteries, the AC adapter can be u

Краткое содержание страницы № 4

A. PROGRAMMING SEQUENCE B. FUNCTION BUTTONS 1. Time Zone Setting There are 5 function buttons located on the front of the Projection Alarm. 2. Hour Setting The function buttons are labeled: AL, light intensity icon, light direction icon, 3. Minute Setting MODE/+, and SNOOZE (the top bar). 4. Year Setting 5. Month Setting C. TIME ZONE SETTING 6. Day Setting 1. Hold down the "MODE/+" button for 2 seconds, the time zone ("-5" default) 7. 12/24-hour Mode will flash in the Date LCD. 8. Daylight Savin

Краткое содержание страницы № 5

1. Hold down the "MODE/+" button for 2 seconds (the selected time zone 2. Press the "MODE/+" button to toggle between 12 and 24-hour time will flash), press the "AL" button three times until the year flashes. display. 2. Press the "MODE/+" button to select the year. 3. Press the "AL" button to confirm the time display setting and move to the 3. Press the "AL" button to confirm the year and move to the month setting. Daylight Saving Time setting, or press the "SNOOZE" button to confirm 4. Press t

Краткое содержание страницы № 6

7. For more detail visit http://www.boulder.nist.gov/timefreq.htm. To listen to 3. The projection will auto-focus for display from three to six feet away. A the NIST time call (303) 499-7111. This number will connect you to an dark surrounding will be necessary to clearly see the projection. 0 0 automated time, announced at the top of the minute in "Coordinated 4. The direction of the display can be rotated 360 in 90 increments by Universal Time", which is also known as Greenwich Mean Time (GMT)

Краткое содержание страницы № 7

3. TURNING ALARM OFF (WHILE SOUNDING) 1. Press the "MODE/+" button and the display will now show seconds. 2. Press the "MODE/+" button and the display will now show alarm time. Note: The alarm will sound for 23 seconds and then increase in volume 3. Press the "MODE/+" button and the display will now show month - date. and speed for another 62 seconds (85 seconds total). If no button is MAINTENANCE & CARE pushed it will shut off and be active for the next day. A. Extreme temperatures, vibrations

Краткое содержание страницы № 8

WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can o