Руководство по эксплуатации Aquatic Exotic Flames Natural Gas

Краткое содержание страницы № 1

FIRE PIT INSTALLATION AND OPERATION GUIDE FOR

® ©
Featuring Aquatic Glassel Tempered, Formulated Glass, 2005 - 2007

NATURAL GAS INSTRUCTIONS

Adequate Fire Pit Ventilation is Required (if indoors)
NOTE: READ INSTRUCTIONS FULLY BEFORE INSTALLING OR OPERATING.
INSTALLERS, LEAVE THESE INSTRUCTIONS WITH THE CONSUMER!

This product must be burned only in a fully vented (if indoors), non-combustible fire pit with the damper
completely open (if indoors) and the chimney free of any obstr

Краткое содержание страницы № 2

Step 1 Clean out your fire pit (Figure 1). Remove old burner (unless it can be re-used). Attach your new burner with the flex line provided. Hint – unscrew the fitting on each end of the flex line. Screw the fittings to the burner and gas line first. Then screw the flex line to each fitting. Position the burner to the center and 2 to 3 inches below the rim of the pit by gently bending the flex line. Figure 1 Step 2 Now pour in the crushed lava rock (Figure 2) wh

Краткое содержание страницы № 3

Step 3 Now pour and shape 2 inches of glass fill. (Figure 3 and 4) Your installation is now complete. Turn on the glass and light the fire pit with a long lighter, making sure to keep your hand away from the surface of the glass. Enjoy your product and thank you for purchasing from Exotic Flames! Figure 3 Figure 4 Page 3 of 3