Краткое содержание страницы № 1
Twin-tub Washing Machine
User's manual
This manual is for
WD55dHSHAT
Please read this manual
carefully before using.
Retain it for future reference.
Краткое содержание страницы № 2
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Trouble-shooting *Answers to question Packing list *Specification
Краткое содержание страницы № 3
Names of the parts Buzzer Outer cover of the spin tub Water-filling entrance Water inlet selector handle Inner cover of the spin tub Wash selector Spin timer Wash timer Spin tub frame Control panel Spin tub Overflow filter Wash water-filling entrance Water level adjusting lever Lint filter Pulsator Wash tub Base frame Drain hose Wash tub cover Meaning and description of the symbols Contents marked with that symbol are related to the safety of the product and the personal Warning sign s
Краткое содержание страницы № 4
Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage.Be sure to use single-phase at the location easily to be insert- three pins receptacle.The earthing ed and extracted by hand. Be sure terminal of the receptacle must be to pull the plug off when there's earthed reliably.If possible,please power failure, or the machine is adopt electric leakage protector. being moved, cleaned or when it
Краткое содержание страницы № 5
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Keep the machine away from direct Handicapped or chil
Краткое содержание страницы № 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Voltage change This washer is assembled for 220V, but can be changed from 220V to 127V. Check your electrical source and follow the diagram below to convert voltage. Green Blue White (1). Please first pull off the power plug and hang up the power cord. (2). Loosen the fastening screw and take off the back c
Краткое содержание страницы № 7
4.If extra drain hose is needed , please make separate purchase. The inner diameter of the > 30mm extra hose shall not less than 30mm, and the length shall not exceed 1.5m. <1.5m If the extra hose is too long, cut it either at point A or B. A B How to change the direction of the drain hoses Figure 1 indicates the leave factory installation Back position of the drain hose. Soft item Front Extend the drain hose from the side of wash tub Figure 1 Put soft items on
Краткое содержание страницы № 8
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before washing the laundries Check if
Краткое содержание страницы № 9
The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- able to put in reasonable amount of laundries and the laundries can be turned round in wash- ing for one
Краткое содержание страницы № 10
Washing sequence Water-filling selector handle Overfilling sign Wash timer Wash selector Water-filling entrance Buzzer Spin timer (To set to below 2 minute, (Standard current, (The buzzer will ring when (to set to below 1 minute, first set to 6 minute then strong current) the washing finishes) first set to 2 minute then turn it back. it can increase turn it back. it can increase the service life of the timer). the service life of the timer). OFF OFF STRONG OFF 5 OFF OFF STANDARD 1 15
Краткое содержание страницы № 11
Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries Proper No gland are slanting (2) Close the inner and outer cover of the spin tub. Outer cover of The spin tub Inner cover of The spin tub (3) Spin for 1-2 minutes. 3.Run the foam-removing spinning. (1) Open the outer cover of the spin tub. (2) Set the water-fi
Краткое содержание страницы № 12
Rinsing Rinse with water-filling OVERFILL 1.Put the laundries into the wash tub. Select suitable current according to the laundries. If you find water flo- wing out here,please twist the water tap to 2.Adjust the water level limit the water filling. Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. (Repeat the midway
Краткое содержание страницы № 13
Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if you op
Краткое содержание страницы № 14
Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See to Figure 1) Figure
Краткое содержание страницы № 15
Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the Water level adjusting lever corrugation pipe inside the overflow filter ( as indicated in Corrugation Figure 1). Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. Figure 1 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting plate at Hook the bottom of the fi
Краткое содержание страницы № 16
Trouble-shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique Spin tub frame upwards to dismantle it. 2.Install After install the back edge of the spin tub frame to proper position, push the four points marked with " " by force to reset it. Spin tub Please c
Краткое содержание страницы № 17
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason Is there power failure? Is the power plug loose? The machine does Is the pulsator twist
Краткое содержание страницы № 18
Packing list Quantity Name One piece User's manual One piece Water inlet hose One piece Lint filter One piece Gland Water-filling jointer One piece One set Twin-tub washing machine Specification Water level/Water quantity (about) Maximum/43L Medium/36L Minimum/30L 0.02 0.2 Injection pressure(MPa) 16
Краткое содержание страницы № 19
