Руководство по эксплуатации Casio MA1205-EA

Краткое содержание страницы № 1

MA1205-EA © 2012 CASIO COMPUTER CO., LTD.
Operation Guide DQ-950S
ILLUSTRATION
1
2 3
SNOOZE/LIGHT
RESET
MAX/MIN
MAX/MIN
4
SET DEMO
8
ALARM
SNOOZE
ON
ALARM
OFF
5 6
7
SNOOZE
SET DEMO
ON
OFF
RESET
RESET
• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
• Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the
illustration.
Alarm Off Snooze Alarm On
PM Alarm on
indicator indic

Краткое содержание страницы № 2

Operation Guide DQ-950S GENERAL GUIDE USING THE CLOCK 1. Press the SET button (5) to cycle through the setting screens as shown below. 11111 SNOOZE/LIGHT button • Press this button to illuminate the display for about five seconds. Normal Timekeeping Screen Contrast Setting Screen • The SNOOZE/LIGHT button is the area at the top of the clock panel marked “SNOOZE/LIGHT”. • Pressing this button while the alarm is sounding stops the alarm. 22222 MAX/MIN button Press this button to display the high a

Краткое содержание страницы № 3

Operation Guide DQ-950S USING THE ALARM THERMOMETER AND HYGROMETER FUNCTIONS The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (8) to A built-in sensor measures temperature and humidity, and shows the measured value on the display. select the snooze alarm feature. The readout from the temperature sensor can also be switched between Celsius (°C) and Fahrenheit (°F). Setting the Alarm Time Temperature Measurements Use the – (DOWN) and + (UP) buttons

Краткое содержание страницы № 4

Operation Guide DQ-950S BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove all of the old batteries. 3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. 4. Press the RESET button (7). Be sure to press the RESET button (7)