Краткое содержание страницы № 1
®
GE Monogram
Owner’s Manual
ZDI15 and ZDIS15
Automatic Icemaker
monogram.com
Краткое содержание страницы № 2
Consumer Information Icemaker Introduction Your new Monogram icemaker makes an eloquent statement of style, convenience and kitchen planning flexibility. Whether you chose it for its purity of design or the assiduous attention to detail, you’ll find that your Monogram icemaker’s superior blend of form and function will delight you for years to come. The information on the following pages will help you operate and maintain your icemaker properly. ® If you have any other questions---in the USA,
Краткое содержание страницы № 3
Immediately contact the dealer (or builder) If you that sold you the icemaker. received a damaged icemaker If you To obtain service, see the Consumer Services For customers in Canada: page in the back of this manual. need FIRST, contact the people who serviced your service We’re proud of our service and want you to be appliance. Explain why you are not pleased. pleased. If for some reason you are not happy In most cases, this will solve the problem. with the service you receive, follow these
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS Before it is used, the icemaker must be • Unplug the icemaker or disconnect power properly installed and located as described in before cleaning, servicing or changing the this manual. light bulb. Failure to do so can result in death or electrical shock. WARNING–To reduce the risk of fire, • It is your responsibility to be sure your electrical shock or injury when using your icemaker: icemaker, follow basic precautions including the
Краткое содержание страницы № 5
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ LIRE ET CONSERVER CES INSTRUCTIONS Avant son utilisation, la machine à glaçons doit • Débrancher la machine à glaçons ou déconnecter être bien installée et située selon la description le courant électrique avant de la nettoyer, de dans ce manuel. l’entretenir ou de changer l’ampoule d’éclairage. L’omission d’observer ces précautions peut AVERTISSEMENT : Pour réduire les causer un décès ou un choc électrique. risques d’incendie, de choc électrique ou de • Vous
Краткое содержание страницы № 6
HOW TO CONNECT ELECTRICITY Do not, under any circumstances, cut or The icemaker should always be plugged into remove the third (ground) prong from the its own individual electrical outlet which has a power cord. For personal safety, this appliance voltage rating that matches the rating plate. must be properly grounded. This provides the best performance and also prevents overloading house wiring circuits The power cord of this appliance is equipped which could cause a fire hazard from with a 3-
Краткое содержание страницы № 7
DANGER: RISK OF CHILD ENTRAPMENT Child entrapment and suffocation are not Before You Throw Away Your Old problems of the past. Junked or abandoned Refrigeration Product: refrigeration products are still dangerous… • Take off the doors. even if they will sit for “just a few days.” If you • Leave the shelves in place so that children are getting rid of your old appliance, please may not easily climb inside. follow these instructions to help prevent accidents. DANGER! RISQUES POUR LES ENFANTS Les e
Краткое содержание страницы № 8
USE OF EXTENSION CORDS Because of potential safety hazards under 3-wire grounding type appliance extension certain conditions, we strongly recommend cord having a grounding type plug and outlet against the use of an extension cord. and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts. However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States) or a CSA-listed (in Canada), CORDONS PROLONGATEURS Nous vous recomma
Краткое содержание страницы № 9
USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada) Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug. However, if you must use an adapter, where adapter ground terminal is very likely to break local codes permit, a temporary connection with repeated use. may be made to a properly grounded 2-prong If the adapter ground terminal breaks, DO wall outlet by use of a UL-listed adapter NOT USE the refrigerator until a prope
Краткое содержание страницы № 10
Controls and Features Icemaker Remove IMPORTANT: Do not remove any permanent • Do not use sharp instruments, rubbing alcohol, flammable fluids or abrasive instruction labels inside your icemaker or the packaging cleaners to remove tape or glue. These Tech Sheet that is fastened behind the lower products can damage the surface of your access panel. icemaker. For more information, see the • Remove tape and any labels from your Important Safety Instructions section. icemaker before using (except t
Краткое содержание страницы № 11
Controls and Features Icemaker Features of your icemaker Cleaning cycle light Light switch Ice level sensor Control panel Cutter grid cover Water pan Model & serial numbers Magnetic Ice retainer door catch baffle Lower access panel Ice scoop 11
Краткое содержание страницы № 12
Operating Instructions Icemaker How your When you first start your icemaker, the water 3. The water containing the rejected minerals is drained after each freezing cycle. pan will fill and the system will rinse itself icemaker before starting to make ice. The rinsing 4. Fresh water enters the machine for the next works process takes about five minutes. ice making cycle. Under normal operating conditions, the 5. Cubes fall into the storage bin. When the bin is full, the icemaker shuts off icemak
Краткое содержание страницы № 13
Care and Cleaning Icemaker Unplug the icemaker before cleaning. Caring Periodically inspect and clean the icemaker Clean the ice and water system periodically to keep it operating at peak efficiency. to remove mineral scale buildup. Frequency for your of cleaning depends on water hardness. icemaker Both the ice making system and the air cooled With hard water (15 to 20 grains/gal. [4 to 5 condenser need to be cleaned regularly. The grains/liter]), cleaning may be required as minerals rejected
Краткое содержание страницы № 14
Care and Cleaning Icemaker Condenser A dirty or clogged condenser: 4. Remove dirt and lint from the condenser fins and the unit compartment with a brush • Prevents proper airflow. attachment attached to a vacuum cleaner. • Reduces ice making capacity. • Causes higher than recommended operating temperatures which may lead to component failure. 1. Unplug the icemaker or disconnect power. 2. Remove the 2 screws in the lower access panel and the 2 screws from the base grille area of the front panel
Краткое содержание страницы № 15
Care and Cleaning Icemaker Interior 1. Unplug the icemaker or disconnect power. 8. Remove the two screws that hold the water pan in place. Push down with one hand on 2. Open the storage bin door and remove any ice that is in the bin. 3. Remove the drain cap from the water pan and drain thoroughly. Replace the drain cap. 4. Remove the three screws that hold the cutter grid cover in place. 5. Unplug the wiring harness from the left side of the cutter grid. the front of the pan while pulling forwar
Краткое содержание страницы № 16
Care and Cleaning Icemaker Light bulb The icemaker has a light bulb in the top of the storage bin. To replace it, open the bin door replacement and follow these instructions: 1. Unplug the icemaker or disconnect power. 2. Remove the 3 screws that hold the cutter grid cover in place. Reach behind the control panel and pull the light bulb down. 3. Replace with a 12-volt wedge base-type bulb (automotive #917). Locate the light bulb receptacle at the top behind the control panel. Align the flat edge
Краткое содержание страницы № 17
Preparation Icemaker Front Your icemaker has 2 adjustable leveling legs to help you steady the product and make sure it leveling legs is level. 1. Place a carpenter’s level on top of the icemaker to make sure it is level from front to back and side to side. 2. Lift the top front of the icemaker to locate the leveling screws that are on the bottom front. 3. Using an adjustable wrench, change the height of the legs as follows: •Turn the leveling leg to the right to lower that side of the icemake
Краткое содержание страницы № 18
Reversing the Door Swing Icemaker 5 1 To reverse TOOLS NEEDED: ⁄16† wrench, ⁄4† wrench, To reverse the hinges: flat putty knife, Phillips screwdriver the door 1. Using a flat putty knife, remove the plug Parts Supplied: buttons from the screw holes opposite of the door hinges, top and bottom. Set aside. 2. Remove the two screws holding the top hinge. Turn the hinge upside down so that the hinge pin points up. Place the hinge on Four plug buttons the opposite side at the bottom of the door. 3. R
Краткое содержание страницы № 19
Reversing the Door Swing Icemaker To reverse the door To replace door on hinges: 1. Place plastic hinge sleeve on bottom hinge and position the door on the pin. 2. Place plastic hinge sleeve in the top hinge hole on the door. Align the door on the bottom hinge and replace the top hinge pin. 3. Replace the handle and handle screws. To reverse the door catch: 1. Remove the plugs buttons from the opposite side of the door. 2. Remove the screws from the magnetic door catch and replace it on the op
Краткое содержание страницы № 20
The Problem Solver Icemaker PROBLEM POSSIBLE CAUSE • Power cord is not plugged into a live outlet. ICEMAKER DOES NOT Questions? OPERATE • The control is set at OFF. • The fuse is blown/circuit breaker is tripped. Replace fuse or Use this reset the breaker. problem solver! • Room temperature is colder than normal. Room temperature must be above 55˚F (13˚C). Otherwise, bin thermostat may sense cold room temperature and shut off even though the bin is not full of ice. Also, unit may not restart onc
