Краткое содержание страницы № 1
Synergy TRU-Balance
BASIC OPERATION INSTRUCTIONS
TM
Po
GC2 Controller
ACN# 088 609 661
ACN# 088 609 661
Краткое содержание страницы № 2
2 Basic Operation Instructions SAFETY GUIDELINES WARNING! An authorized Pride Provider or a qualified technician must perform the initial setup of this product and must perform all of the instructions in this manual. The symbols below are used throughout this owner's manual and on the controller to identify warnings and important information. It is very important for you to read them and understand them completely. WARNING! Indicates a potentially hazardous condition/ situation. Failure to follo
Краткое содержание страницы № 3
Basic Operation Instructions 3 TABLE OF CONTENTS INTRODUCTION ................................................................................. 5 GC2 CONTROLLER ........................................................................... 7 PRECAUTIONARY GUIDELINES ................................................. 7 OPERATING THE GC2 CONTROLLER ....................................11 CONTROLLER COMMUNICATION CONNECTOR .............. 13 LOCK MODE .....................................................
Краткое содержание страницы № 4
4 Basic Operation Instructions LABEL INFORMATION PRODUCT SAFETY SYMBOLS The symbols below are used on the controller to identify warnings, mandatory actions, and prohibited actions. It is very important for you to read and under- stand them completely. Read and follow the information in the owner’s manual. Avoid exposure to rain, snow, ice, salt, or standing water whenever possible. Maintain and store in a clean and dry condition. EMI-RFI - This product has been tested and passed at an immunity
Краткое содержание страницы № 5
Basic Operation Instructions 5 INTRODUCTION WELCOME to Pride Mobility Products Corporation (Pride). The product you have purchased combines state-of-the-art components with safety, comfort, and styling in mind. We are confident that the design features will provide you with the conveniences you expect during your daily activities. Understanding how to safely operate and care for this product should bring you years of trouble free operations and service. Read and follow all instructions, warnings
Краткое содержание страницы № 6
6 Basic Operation Instructions NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and we will be glad to send you a new one immediately. My authorized Pride Provider Is: Name: _____________________________________________________ Address:____________________________________________________ Phone Number: ______________________________________________ Purchase Date: _______________________________________________ GC2 Controller www.pridemobili
Краткое содержание страницы № 7
Basic Operation Instructions 7 GC2 CONTROLLER The GC2 controller is a fully-programmable, modular electronic controller system that allows you to operate your power chair. It is designed to allow the user to have complete control over chair movement and speed. The controller has been pre-programmed to meet a typical user’s needs. The program is set using either a personal computer with software provided by the controller manufacturer or with a hand-held programmer, also provided by the controll
Краткое содержание страницы № 8
8 Basic Operation Instructions Electromagnetic and Radio Frequency Interference (EMI/RFI) WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves can have an adverse affect on the performance of electrically-powered mobility vehicles. Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless computer links, micro
Краткое содержание страницы № 9
Basic Operation Instructions 9 GC2 Controller Features Figure 1 provides information on the GC2 components and connections. Use this diagram to familiarize yourself with the function and location of each component before using the GC2 controller. The following functions are available with the GC2 controller: Joystick Control The joystick is used to control the direction and speed of the power chair. Speed Adjustment The user can increase or decrease the maximum speed of the power chair. Th
Краткое содержание страницы № 10
10 Basic Operation Instructions Horn Key Activates a warning horn. Battery Condition Meter Series of five colored LEDs which display the battery condition. On/Off Key Press to power on or off the power chair and controller. Speed Dial Turn to increase or decrease maximum speed. Joystick A multi-functional tool used to control speed and direction. Off-board Charger/ Programming Port Used to charge or program the power base. Figure 1. GC2 Components and Connections GC2 Controller www.pridemobilit
Краткое содержание страницы № 11
Basic Operation Instructions 11 OPERATING THE GC2 CONTROLLER The GC2 controller is used to operate your power chair and all of its components. The GC2 controller system consists of (see figure 2): 1. Joystick 2. Control panel 3. Joystick module 4. Off-board charging/programming socket 5. Power module 6. Controller communication connector 2 1 3 5 4 6 Figure 2. GC2 Controller Joystick Control The joystick controls the driving speed and direction of the power chair. When the joystick is at rest, i
Краткое содержание страницы № 12
12 Basic Operation Instructions Battery Condition Meter On/Off Key Horn Key Speed Dial Joystick Figure 3. Controller Keypad Control Panel The control panel is located directly in front of the joystick. It contains keys and a dial that you will use to control your power chair. See figure 2. On/Off Key The on/off key turns the system on and off. WARNING! Unless faced with an emergency situation, do not use the on/off key to stop the chair. This will cause the power chair to stop abruptly. WARNING!
Краткое содержание страницы № 13
Basic Operation Instructions 13 Speed Dial The GC2 controller provides a speed dial to control the speed of the power chair. See figure 3. To change the speed: 1. Push the on/off key to power on the chair and the controller. 2. To increase your speed, turn the speed dial clockwise. 3. To decrease your speed, turn the speed dial counterclockwise. NOTE: We recommend that the first few times you operate your power chair, you set the speed to the slowest setting until you become familiar with your n
Краткое содержание страницы № 14
14 Basic Operation Instructions LOCK MODE The controller is equipped with a feature that enables you to “lockout” unautho- rized users. To lock the controller: 1. While the power is on, press and hold the on/off key until it beeps (approximately 1 second). 2. Release the on/off key. 3. Move the joystick to the full forward position until it beeps. 4. Move the joystick to the full rearward position until it beeps. 5. Release the joystick. There will be one long beep. The controller system is now
Краткое содержание страницы № 15
Basic Operation Instructions 15 FAULT CODES The battery condition meter will flash fault codes when the controller system detects an abnormal condition in the electrical system. All of the battery condition meter LEDs will flash a number of times quickly, then pause, then flash again. The battery condition meter will continue to flash the fault codes until the problem is fixed. The table below identifies the individual fault codes. If any of these fault codes persist, contact your authorized Pr
Краткое содержание страницы № 16
16 Basic Operation Instructions CARE AND MAINTENANCE Refer to your power chair owner’s manual for proper cleaning and disposal instructions. WARRANTY For two (2) years from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of charge, the controller or any of its components found upon examination by an authorized representative of Pride to be defective in material and/or workmanship. GC2 Controller www.pridemobility.com
Краткое содержание страницы № 17
Basic Operation Instructions 17 NOTES www.pridemobility.com GC2 Controller
Краткое содержание страницы № 18
18 Basic Operation Instructions NOTES GC2 Controller www.pridemobility.com
Краткое содержание страницы № 19
Basic Operation Instructions 19 NOTES www.pridemobility.com GC2 Controller
Краткое содержание страницы № 20
www.pridemobility.com www.prideservice.com www.quantumrehab.com Pride Mobility Products Corporation 182 Susquehanna Avenue Exeter, PA 18643-2694 USA Pride Mobility Products Company 380 Vansickle Road Unit 350 St. Catharines, Ontario L2R 6P7 Canada Pride Mobility Products Ltd. 32 Wedgwood Road Bicester, Oxon OX26 4UL UK Pride Mobility Products Australia Pty. Ltd. 21 Healey Road Dandenong, 3175 Victoria, Australia Pride Mobility Products Italia S.r.l. Via del Progresso - ang. Via del Lavoro Loc.
