Руководство по эксплуатации Samsung WT80S1(P)

Краткое содержание страницы № 1

WASHING MACHINE
Owner’s Instructions
WT80S0(P)/WT80S1(P)/WT80S2(P)/WT80S2SG
BEFORE USING THE WASHING MACHINE 1
PRECAUTIONS 1
CONTROL PANEL 1
DESCRIPTION AND CLEANING OF PART 2
WASHING PROCEDURE 3
To Wash 3
To Spin Dry 3
To Rinsing 3
Overflow rinse 3
Additional rinse 4
INSTALLATION 4
Location 4
Mounting the legs 4
Connecting the drain hose 4
LAUNDRY GUIDE 5
MAINTENANCE 5
TROUBLE SHOOTING 5
Before operating the washing machine, please read this manual
thoroughly, and retain it for future referen

Краткое содержание страницы № 2

IF YOU NEED HELP. Do not hesitate to call your local Samsung Service Center. They will be pleased to help you. Be sure to give them your name, address, telephone number and the purpose of the call. SPECIFICATIONS DIMENSIONS (WxDxH) 792 x 465 x 951 mm 2 WATER PRESSURE 0.05~0.78 MPa(0.5 ~ 8.0kg . f/cm ) WEIGHT With out pump 29 kg With pump 31 kg EXTRACTION EFFICIENCY 50 % STANDARD QUANTITY OF WATER 54l RATING TIME Washing 1 Hour / Spinning 15 minutes DC68 - 01182A-01

Краткое содержание страницы № 3

CONTROL PANEL BEFORE USING THE WASHING MACHINE CAUTIONS 0 • Remove the cap-hose • Be sure that the washer is grounded. 1.WASH TIMMER 15 3 from the drain hose. To avoid electrical shock,use a This is used to set the metal pipe for the ground 12 6 wash time, 1-15 minutes. 9 connection. But, don't ground the WASH TIMER • In the case of pump drained washer with gas pipes or telephone 2.CYCLE SELECTOR Wash/Rinse Wash washer, remove lines to avoid to dangers of explosion This is used to set the

Краткое содержание страницы № 4

DESCRIPTION AND /CLEANING OF PARTS CLEANING THE FILTER • Pull the overflow filter out and take up the filter by removing 3 screws as shown in figure. Wash the filter and washing tub. SPIN DRYER LID When you open this INNER LID lid while the spin basket is spinning,the spinning will be stopped by the brake DRAIN HOSE system. • Push the strainer(filter) out and take SPIN DRYER BASKET up the filter as shown in figure. (with pump) Wash the filter and washing tub. POWER CORD OVERFLOW The plug’s

Краткое содержание страницы № 5

WASHING PROCEDURE TO SPIN DRY TO RINSING TO WASH 1. Before starting to wash, proceed as follows, 1. Transfer the clothes into the 1. Set the cycle selector KNOB to Wash/Rinse Wash Connect the water supply hose and open spin basket and arrange the ‘WASH.RINSE’. the water tap. clothes evenly. (In the case of Drain Rinse Drain • Lay the drain hose down toward drain pump a sinkhole. (In case no drain pump) ‘WASH’) CYCLE SELECTOR CYCLE SELECTOR • Place the drain hose in sink or bath. 2. Be sure to

Краткое содержание страницы № 6

INSTALLATION ADDITIONAL RINSE LOCATION CONNECTING THE DRAIN HOSE 1 After rinsing you can select this Leave some space of After attaching the connector ring(a), insert the course for more effective rinse at least 15cm between the washing machine drain hose(b) in the draining direction. (Don't just select this course and the wall. for rinse.) Load the laundry Place the washing machine on a sturdy flat surface. a evenly into the spin basket. If the washing machine is placed on an uneven b or weak

Краткое содержание страницы № 7

LAUNDRY GUIDE MAINTENANCE TROUBLE SHOOTING TO LOAD THE LAUNDRY INTO WASHING TIME TROUBLE CHECK POINT THE SPIN BASKET. WASHING TYPE OF CLOTHING WASHING TIME The washing Check that the power cord is Press the laundry evenly and put the safety SELECTION machine does properly connected to a power cover into the spin basket as shown in the figure. 10 to15 minutes Extremely soiled not work. outlet. Is there a power failure? heavy fabric NORMAL Clothes do Is the machine overloaded? not move