Краткое содержание страницы № 1
CI93 CI931 1 Int Integr egr ra at ated e ed W Wa Washing Mac ashing Mach hine ine e
Manual f Manual f fo o or Inst r Insta allation, Use and Maint llat tion, Use and Maintenanc enanc ce e
: 01949 862 012 : 0194 49 862 012 FF : 01949 862 003 : 01949 862 003 EE : service@cda.eu : service@ @cda.eu W W : www : www.cda.eu .cda.eu
Краткое содержание страницы № 2
Contents Page 1 Important information Page 2 Warnings Page 3 Washing machine specifications Page 4 Unpacking the washing machine and removing the transit bolts Page 5 Connecting to the mains water supply Page 6-7 Levelling and electrical information Page 8 Before first use Page 9 Preparing garments for washing Page 10 Detergents and additives Page 11-12 Selecting the wash programme Page 13-14 Programmes Page 15 Spin speed and anti-crease Page 16 Time delay Page 17 Starting up Page 18 Wash programm
Краткое содержание страницы № 3
Important This appliance must only be used for the purpose for which it is intended, i.e. domestic use. Any other use could be dangerous and may lead to premature failure of the appliance. The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. Under no circumstances shoul
Краткое содержание страницы № 4
Warnings To avoid the risk of fire, electric shocks, injury or damage when using your washing machine, please take the following precautions: Please read all the instructions before using the washing machine. Do not wash items that have previously been cleaned, washed, soaked or treated with petrol, solvents for dry cleaning, other inflammable substances or explosives, as they produce fumes that could catch fire or explode. Do not add petrol, solvents for dry cleaning or other inflammable o
Краткое содержание страницы № 5
Unpacking the Washing Machine Remove the base, corner protectors and top cover (Figure 1). Removing the Transit Bolts Remove the screws holding the plastic covers to the back of the washing machine (Figure 2 and 3). Loosen and remove the 3 transit bolts (Figure 3). Cover the holes with the plastic covers you have just removed (Figure 2). fig. 1 Do not throw the transit bolts away. If you need to move the washing machine after installation you should first replace the transit bolts. fig. 2
Краткое содержание страницы № 6
Connecting to the Mains Water Supply The water supply hose is located inside the drum. Connect the bent end of the hose to the threaded inlet of the electrovalve located at the rear of the washing machine. Connect the other end of the hose to the water inlet. Then securely tighten the connecting nut. fig. 4 The drain hose must be securely fastened to the outlet to prevent any risk of the drain hose becoming detached and causing flooding. The washing machine must be connected to the main
Краткое содержание страницы № 7
Levelling To reduce the noise level from the washing machine and to prevent unnecessary movement during use, you should ensure the washing machine is level using the adjustable feet. Please note: Raising the washing machine too high can affect the stability of the appliance. fig. 7 Electrical Connection Check the rating plate located on the porthole door of the washing machine before connecting the appliance to the power supply. Ensure that the voltage reaching the plug is the same
Краткое содержание страницы № 8
Electrical information Warning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. Remove the fuse cover and fuse. 2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover. 3. Replace fuse cover. Important: Do not use the appliance without the fuse cover in position. How to connect an alternative plug electric s
Краткое содержание страницы № 9
Before First Use When your washing machine has been correctly installed, we recommend that you pre-clean the machine. This is to check that the installation, the connections and the drainage are all correct, and to thoroughly clean the inside of the washing machine before any wash programmes are run (see the operating instructions on the fig. 10 following pages). Prior to pre-cleaning you should ensure the transit bolts have been removed. Select the normal programme at 60ºC (Fi
Краткое содержание страницы № 10
Preparing Garments for Washing Preparation Before placing the clothes in the drum, make sure all the pockets are empty (Figure 11). Any small objects may block the drain pump. Sorting the Clothes fig. 11 Sort the clothes according to fabric and how they are made: We recommend using the delicate programmes for sensitive fabrics. There is a special wool programme for woollens (Figure 12). Sort clothes according to how soiled they are (Figure 13). Wash lightly soiled garments using a short
Краткое содержание страницы № 11
Detergents and Additives Your washing machine’s detergent dispenser has three compartments. Add the detergent or additive to the detergent dispenser before starting the wash programme (Figure 15). Liquid detergents may also be used in this washing machine. The level of liquid must never be higher than the MAX mark printed fig. 15 on the dispenser wall. Remember that the amount of detergent to be used will always depend on: The amount of clothes to be washed. How heavily the clothes
Краткое содержание страницы № 12
Selecting the Wash Programme StS art/st tart/st op but op but totn on Screen drying time start Drying time pause delay spin timer option CI931IN 6Kg Programme Detergent dispenser Spin and Delay time Additional function selector dial anti-crease button button button fig. 18 To select a wash programme: Press the programme selector dial to release it (Figure 19) . Select the wash programme by turning the programme selector dial (Figure 19 - See programme table). The display on the control pa
Краткое содержание страницы № 13
Washing Machine Programmes There are five types of programme: Normal programmes Delicate programmes Wool programme Auxiliary programmes Drying programmes PROGRAMMES Normal Auxiliary Wool Delicate Delicate o 1 Normal 8 Delicate cold 12 Wool 35 C 12 Rinses 14 Normal Dry o o 2 Quick 30 C 9 Delicate 30 C 13 Spin Drying 15 Delicate Dry o o 3 Normal 30 C 10 Delicate 40 C o 4 Normal 40 C o 5 Normal 60 C o 6 Normal 90 C o 7 Prewash 60 C Eco Note We recommend you choose a wash programme wi
Краткое содержание страницы № 14
Washing Machine Programmes Possible option buttons Recommended Programme Fabric type temperature Normal cold Quick 30ºC Normal 30ºC Normal 40ºC (*) Normal 60ºC Normal 90ºC Prewash 60ºC Delicate cold Delicate 30ºC Delicate 40ºC Wool 35ºC Rinses Spin-drying Normal dry Delicate dry (*) Programme for wash and energy consumption assessment in accordance with standard EN60456, press intensive wash button. 12 Drying p
Краткое содержание страницы № 15
Washing Machine Programmes Max load Wash Approx. Programme Total consumption of clothes product duration description kWh/litres (Kg) compartment (minutes) NOTE: the KWh and litre consumptions and programme durations may vary depending on the type and amount of clothes, mains water pressure, etc. 13
Краткое содержание страницы № 16
Spin Speed Selection and Anti-Crease You should first select the wash programme and then select the wash options drying (Changing the programme cancels the preset selected options). time delay spin timer option Each selected programme has its own preset spin speed. Spin speed fig. 22 You can reduce the spin speed or remove it completely by pressing the spin button (Figure 22). drying time The spin speed will gradually reduce each time the spin button is pressed at 100 r.p.m. intervals
Краткое содержание страницы № 17
Delay Timer Delay timer selection button drying time A delay of up to 24 hours can be selected. The delay must be selected after choosing the wash programme. delay spin timer option To set the required delay, press the delay timer button (Figure 26). Each time the button is pressed the delayed start of washing is increased by fig. 26 one hour. Cancelling the delay To cancel the delay, press the delay timer button repeatedly to cycle through the full 24-hours, and then press again.
Краткое содержание страницы № 18
Starting Up Start/Pause button drying time To start up the washing machine you have to press the Start/Pause button (Figure 29). delay imer option The time remaining (in minutes) until the end of the programme will appear on the display at all times. fig. 29 Lock Function Lock function selection drying drying time time The lock function ensures that the programme will not be affected if any buttons are pressed. It is used when children could press the buttons, etc. d delay elay iimer
Краткое содержание страницы № 19
Programme Phases and Power Cuts Programme Phases When the programme is running, the programme phase and the time remaining will appear on the display (Figure 32). The active phases will appear successively at the top of the display as the programme progresses (Figure 32). The time remaining until the end of fig. 32 the programme will also appear on the display. It updates at regular intervals, but not minute by minute. Any option button can be selected provided the wash phase in w
Краткое содержание страницы № 20
Maintenance After each wash, leave the door open for a while to allow the air to circulate freely inside the machine. From time to time, depending on the hardness of your water, it is recommendable to run a full wash cycle using a decalcifying product. This will extend the life of your washing machine. Cleaning the Detergent Dispenser Clean the detergent dispenser whenever there is any washing product residue left inside. Pull outwards on the detergent dispenser to remove it completely
