Краткое содержание страницы № 1
Installation
Washer-Extractors
Cabinet Freestanding
Refer to Page 6 for Model Identification
CFD15C
33, 40, 55 and 75 Models
CFD19C
CFD19C
18, 25 and 35 Models
CFD20C
CFD20C
100, 135, 165 and 200 Models
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 9001000R13
www.comlaundry.com July 2010
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Safety Information.............................................................................. 2 Table of Explanation of Safety Messages........................................................... 2 Important Safety Instructions ............................................................... 2 Contents Safety Decals ........................................................................................ 4 Operator Safety..........................................................................
Краткое содержание страницы № 4
Safety Information Explanation of Safety Messages Important Safety Instructions Precautionary statements (“DANGER,” “WARNING,” WARNING and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These To reduce the risk of fire, electric shock, precautions are intended for the personal safety of the serious injury or death to persons when operator, user, servicer, and those maintaining the using your washer, follow these basic machine. precautions:
Краткое содержание страницы № 5
Safety Information 9. Do not install or store the washer where it will be 20. If the supply cord is damaged, it must be replaced exposed to water and/or weather. by a special cord or assembly available from the manufacturer or its service agent. 10. Do not tamper with the controls. 21. Be sure water connections have a shut-off valve 11. Do not repair or replace any part of the washer, or and that fill hose connections are tight. CLOSE attempt any servicing unless specifically the shut-off
Краткое содержание страницы № 6
Safety Information WARNING CAUTION This machine must be installed, adjusted, Be careful around the open door, and serviced by qualified electrical particularly when loading from a level maintenance personnel familiar with the below the door. Impact with door edges construction and operation of this type of can cause personal injury. SW025 machinery. They must also be familiar with the potential hazards involved. Failure to observe this warning may result in personal injury and/or equipment
Краткое содержание страницы № 7
Safety Information Do not bypass any safety devices in the machine. Operator Safety WARNING WARNING NEVER insert hands or objects into Never operate the machine with a basket until it has completely stopped. bypassed or disconnected balance Doing so could result in serious injury. system. Operating the machine with SW012 severe out-of-balance loads could result in personal injury and serious equipment To ensure the safety of machine operators, the damage. following maintenance checks mus
Краткое содержание страницы № 8
Introduction Model Identification Information in this manual is applicable to these models: HX18PVQM6 SX18PVPA7 UX18PVNA6 HX18PVQU6 SX18PVQU6 UX18PVNU6 HX18PVQM7 SX18PVQM6 UX18PVNA7 HX18PVXU6 SX18PVXU6 UX18PVPU6 HX18PVXM6 SX18PVQM7 UX18PVPA6 UX18PVQU6 HX18PVXM7 SX18PVXM6 UX18PVPA7 UX18PVXU6 SX18PVXM7 UX18PVQA6 UX18PVQA7 18 UX18PVQM6 UX18PVQM7 UX18PVXA6 UX18PVXA7 UX18PVXM6 UX18PVXM7 HX25PVQM6 SX25PVQM6 UX25PVNA6 HX25PVQU6 SX25PVQU6 UX25PVNU6 HX25PVQM7 SX25PVQM7 UX25PVNA7 HX25PVXU6 SX25PVXU6 UX25
Краткое содержание страницы № 9
Introduction continued UX40PVNA7 UX40PVPA7 UX40PVQA7 40 UX40PVQM7 UX40PVXA7 UX40PVXM7 HX55PVNU6 SX55PVNU6 UX55PVNU6 HX55PVNU7 SX55PVNU7 UX55PVNU7 HX55PVQU6 SX55PVPU6 UX55PVPU6 HX55PVQU7 SX55PVPU7 UX55PVPU7 55 HX55PVXU6 SX55PVQU6 UX55PVQU6 HX55PVXU7 SX55PVQU7 UX55PVQU7 SX55PVXU6 UX55PVXU6 SX55PVXU7 UX55PVXU7 HX75PVNU6 SX75PVNU6 UX75PVNU6 HX75PVNU7 SX75PVNU7 UX75PVNU7 HX75PVPU7 SX75PVPU7 UX75PVPU6 75 HX75PVQU6 SX75PVQU6 UX75PVPU7 HX75PVQU7 SX75PVQU7 UX75PVQU6 UX75PVQU7 HX100PVNU6 SX100PVNU6 UX100P
Краткое содержание страницы № 10
Introduction Nameplate Location The nameplate is located at the rear of the machine. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. 1 1 1 CFD15C CFD19CCFD19C CFD20C CFD20C 33, 40, 55 AND 75 MODELS 100, 135, 165 AND 200 MODELS 18, 25 AND 35 MODELS 1 Nameplate Figure 1 Replacement Parts If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laundry Sys
Краткое содержание страницы № 11
Introduction Model Number Familiarization Guide Sample Model Number: *X55PVXM60001 Model Number Prefix *X Washer-Extractor Capacity (pounds dry weight of laundry) 55 Type of Electrical Control (P = WE-6 Computer) P Washer-Extractor Speed Capabilities V Electrical Characteristics X Design Series M6 Option Identification (varies from machine to machine) 0001 * Denotes Brand X55PVXM60001 * 12 15 50 60 2/3+PE 1/3 1000 55 25 EXAMPLE OF NAMEPLATE CFD29N CFD29N Figure 2 9001000 © Copyright, Alliance
Краткое содержание страницы № 12
Specifications and Dimensions General Specifications Model 18 25 333540 Overall Dimensions Overall width 26 in. 26 in. 30.71 in. 30.8 in. 30.71 in. (660 mm) (660 mm) (780 mm) (783 mm) (780 mm) Overall height 40.6 in. 40.6 in. 54.15 in. 47 in. 54.15 in. (1031 mm) (1031 mm) (1376 mm) (1194 mm) (1376 mm) Overall depth 30.7 in. 34.3 in. 33.07 in. 37.8 in. 37.01 in. (780 mm) (870 mm) (840 mm) (960 mm) (940 mm) Weight and Shipping Information 465 lb. 520 lb. 811.30 lb. 789 lb. 862.01 lb. Net weigh
Краткое содержание страницы № 13
Specifications and Dimensions General Specifications Model 1825333540 Drive Train Information Number of motors in drive train 1 1 1 1 1 Drive motor power 1 HP 1 HP 2.95 HP 2 HP 2.95 HP (0.75 kW) (0.75 kW) (2.2 kW) (1.5 kW) (2.2 kW) Cylinder Speeds Wash/reverse speed 10-50 RPM 10-50 RPM 10-50 RPM 10-50 RPM 10-50 RPM Distribution/drain speed 82 RPM 82 RPM 85 RPM 74 RPM 85 RPM Extract speed 250-1000 RPM 250-1000 RPM 250-1000 RPM 250-1000 RPM 250-1000 RPM Centrifugal Force Data Wash/reverse centrif
Краткое содержание страницы № 14
Specifications and Dimensions General Specifications Model 55 75 100 135 165 200 Overall Dimensions Overall width 35.4 in. 41.8 in. 47.3 in. 47.3 in. 51.8 in. 51.8 in. (900 mm) (1060 mm) (1200 mm) (1200 mm) (1300 mm) (1300 mm) Overall height 60.8 in. 61.4 in. 75.6 in. 75.6 in. 82.7 in. 82.68 in. (1544 mm) (1560 mm) (1920 mm) (1920 mm) (2100 mm) (2100 mm) Overall depth 40 in. 46 in. 52.4 in. 59.1 in. 63.8 in. 71.18 in. (1016 mm) (1168 mm) (1330 mm) (1500 mm) (1620 mm) (1808 mm) Weight and Shippin
Краткое содержание страницы № 15
Specifications and Dimensions General Specifications Model 55 75 100 135 165 200 Drive Train Information Number of motors in drive train 1111 1 1 Drive motor power 4 HP 5.4 HP 7.4 HP 10 HP 15 HP 20 HP (3 kW) (4 kW) (5.5 kW) (7.5 kW) (11.5 kW) (15 kW) Cylinder Speeds Wash/reverse speed 10-50 RPM 10-50 RPM 10-50 RPM 10-50 RPM 10-50 RPM 10-50 RPM Distribution/drain speed 69 RPM 65 RPM 61 RPM 61 RPM 100 RPM 80 RPM Extract speed 250-1000 250-1000 250-800 250-800 250-750 250-750 RPM RPM RPM RPM RPM R
Краткое содержание страницы № 16
Specifications and Dimensions 5 18: 31 in. (787 mm) 25: 34.8 in. (884 mm) 40.6 in. (1031 mm) 39.8 in. (1011 mm) 20.4 in. (518 mm) 11 in. (279 mm) 19.13 in. (486 mm) 18: 22.05 in. 26 in. (560 mm) (660 mm) 25: 25.98 in. CFD530N CFD530 N (660 mm) CFS464N 9 in. CFS464N (229 mm) 6 in. 8 (152 mm) 5.5 in. 1 2.9 in. (140 mm) 2 3 (74 mm) 7 6 4 10 6.2 in. (158 mm) 30.7 in. (780 mm) 29.2 in. 9 (742 mm) 34.7 in. 1.6 in. (881 mm) (41 mm) 15.3 in. (389 mm) 2 in. (51 mm) 7.1 in. (181 mm) CFS465N CFS465N th 18
Краткое содержание страницы № 17
Specifications and Dimensions 8.66 in. 11 (220 mm) 1.3 in. 1.3 in. 1.18 in. 1.18 in. (33 mm) (33 mm) (30 mm) (30 mm) 18: 23.23 in. (590 mm) 2.56 in. 20.87 in. (530 mm) 2.56 in. 25: 27.17 in. (690 mm) (65 mm) (65 mm) 25.98 in. (660 mm) 18: 26.38 in. (670 mm) CFD521N CFD521N 25: 30.31 in. (770 mm) 8.9 in. (226 mm) 18: 28.62 in. (727 mm) 5.94 in. (151 mm) 2.72 in. 1 2 25: 32.56 in. (827 mm) 3 (69 mm) 2.95 in. (75 mm) 4 CFD522N CFD522N 5 10 6 9 7 4.3 in. (109 mm) 8 7.09 in. (180 mm) 1.73 in. (4
Краткое содержание страницы № 18
Specifications and Dimensions 3.47 in. 8.66 in. (88 mm) (220 mm) 26.77 in. (680 mm) 1.97 in. 1.97 in. 1.34 in. 26.18 in. (665 mm) 1.34 in. (50 mm) (50 mm) 30.71 in. (780 mm) (34 mm) (34 mm) 28.86 in. (733 mm) CFD537N CFD537N 3.41 in. 29.65 in. (753 mm) CFD538N 13.05 in. (332 mm) CFD538N (86.5 mm) 10.49 in. (267 mm) 7.93 in. (202 mm) 1 4.13 in. (105 mm) 4 2 3 5 6 7 10 8 4.3 in. (109 mm) 1.38 in. (35 mm) 9 6.69 in. (170 mm) CFD539N CFD539N 33 Pound Capacity Models 1 Fill and Supply Ventilatio
Краткое содержание страницы № 19
Specifications and Dimensions 5 37.8 in. (960 mm) 47 in. (1194 mm) 46.3 in. (1176 mm) 24.4 in. (620 mm) 15.5 in. (394 mm) 25.16 in. (639 mm) 30.31 in. 30.8 in. (770 mm) (782 mm) CFS467N CFS467N CFD531N 12.9 in. CFD531N (328 mm) 10.4 in. (264 mm) 3.5 in. (89 mm) 8 2 3 4 1 6.1 in. (155 mm) 7 6 10 41 in. 36.75 in. (1041 mm) 39.4 in. (934 mm) (1001 mm) 38 in. 35 in. (965 mm) (889 mm) 9 20 in. (508 mm) 8 in. 4.4 in. (203 mm) CFS468N (112 mm) th 35 Pound Capacity Models with U in the 8 Position (e.g.
Краткое содержание страницы № 20
Specifications and Dimensions 8.66 in. 11 3.47 in. (220 mm) (88 mm) 1.34 in. 1.34 in. (34 mm) (34 mm) 1.44 in. 1.44 in. 25.51 in. (648 mm) 2.6 in. (36.5 mm) (36.5 mm) (66 mm) 30.12 in. (765 mm) 30.71 in.(780 mm) CFD524N 33.86 in. (860 mm) 3.23 in. 2.6 in. CFD524N 82 mm) (66 mm) 36.06 in. (916 mm) CFD525N 13.05 in. (332 mm) CFD525N 10.49 in. (267 mm) 1 7.93 in. (202 mm) 3 4.13 in. (105 mm) 2 10 4 9 5 8 6 4.3 in. 1.38 in (35 mm) (109.2 mm) 7 7.87 in. 2.36 in. (200 mm) (60 mm) CFD529N CFD529N th 3
