Краткое содержание страницы № 1
C1 / C3 UPRIGHT LIFECYCLE® EXERCISE BIKES
Owner’s Manual
8974901 REV B-2
Краткое содержание страницы № 2
Краткое содержание страницы № 3
CORPORATE HEADQUARTERS 5100 River Road Schiller Park, Illinois 60176 • U.S.A. 847.288.3300 • FAX: 847.288.3703 Service phone number: 800.351.3737 (toll-free within U.S.A., Canada) Global Website: www.lifefitness.com INTERNATIONAL OFFICES Germany & Switzerland All Other EMEA countries & AMERICAS Distributor Business C-EMEA* Life Fitness Europe GMBH North America Siemensstraße 3 Bijdorpplein 25-31 Life Fitness Inc. 85716 Unterschleißheim 2992 LB Barendrecht 5100 N River Road THE NETHERLANDS GERMA
Краткое содержание страницы № 4
FCC Warning - Possible Radio / Television Interference Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the user manual, may cause harmful interference to radio commun
Краткое содержание страницы № 5
TABLE OF CONTENTS 1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ® 2. C1 / C3 Upright Lifecycle Exercise Bike Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 3. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 3.1 Tools & Hardware . . . . . .
Краткое содержание страницы № 6
This Operation Manual describes the functions of the following product: ® Life Fitness Upright Lifecycle Exercise Bike Models: C1 / C3 Thank you for purchasing a Life Fitness bike. Before using this product please read this user manual in its entirety to ensure that you have the knowledge to safely and properly operate all of the features on your bike. We hope you achieve the product experience on your bike that you expect, but if you do have any service issues please go to the How to Obtain Pro
Краткое содержание страницы № 7
1 IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions before using the Life Fitness Lifecycle exercise bike. Save these Instructions. WARNING: Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death.If you feel faint stop exercising immediately. DANGER: To reduce the risk of electrical shock, always unplug this Life Fitness product before cleaning or attempting any maintenance activity. SAFETY WARNING: The safety of the product can be main
Краткое содержание страницы № 8
• Use this product in a well-ventilated area. • Use this product on a solid, level surface. • Make sure that all components are fastened securely. • An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. • Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. • Never operate this appliance if it has a damaged cord or plug, if it is not workin
Краткое содержание страницы № 9
Console Console Water Bottle Holder / Accessory Tray ® 2 C1 / C3 UPRIGHT LIFECYCLE EXERCISE BIKE OVERVIEW Contact Heart Rate Sensors Water Bottle Holder Seat Adjustment C1 with Track Console Pedal Leveler Contact Heart Rate Sensors Seat Adjustment C3 with Track Console Pedal Leveler 7
Краткое содержание страницы № 10
3 ASSEMBLY 3.1 TOOLS & HARDWARE Identify the following components after unpacking your Lifecycle. The tools needed for assembly are included. Quantity Item Description C1 C3 1 2 2 50mm Button Head Screw 2 2 2 20mm Button Head Screw 3 2 2 100mm Hex Head Bolt 4 5 5 Thick Flat Washer - 16mm O.D. 5 2 2 60mm Hex Head Bolt 6 6 4 12mm Small Head Phillips Screw 7 4 4 Flat Washer - 12mm O.D. 8 3 3 Nylock Nut (on seat) 9 3 3 Flat Washer (on seat) 10 2 2 8mm Phillips Screw 11 2 2 6mm Phillips Screw 12 1 1
Краткое содержание страницы № 11
50mm Button Head Screw 20mm Button Head Screw 100mm Hex Head Bolt 60mm Hex Head Bolt 12mm Self-Tapping Screw Nylock Nut (on seat) Flat Washer (on seat) Thick Flat Washer -16mm O.D. Flat Washer -18mm O.D. Flat Washer -12mm O.D. 15mm Button Head Screw 6mm Phillips Screw with Locking Compound 8mm Phillips Screw 6mm Phillips Screw 12mm Small Head Phillips Screw 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 9
Краткое содержание страницы № 12
3.2 PACKAGING Parts: None Remove all packaging and place main components to the side of the box. Break box down in each of the four corners. 3.3 ASSEMBLE THE REAR STABILIZER Parts: Hardware Bag #1 (2, 50mm Button Head Screws) (2, 20mm Button Head Screws) Tools: 5mm Hex Head Wrench Locate and install the two LEVELER FEET (A) to the bottom of the REAR STABILIZER (B).With the bends facing rear- ward, attach the REAR STABILIZER (B) to the BASE UNIT (C) using two 50mm BUTTON HEAD SCREWS (1) from the
Краткое содержание страницы № 13
3.5 CONNECT WIRING / ATTACH COVER Parts: Hardware Bag #3 (4, 12mm Phillips Screws) (4, Flat Washers) Tools: Phillips Screwdriver Detach the WIRE TIE (H) attached to the front of the MONOCOL- UMN (E). Carefully pull the CONSOLE WIRE (L) through the SIDE ACCESS HOLE (M) of the MONOCOLUMN (E). Feed the CON- SOLE WIRE through the GROMMET (N) as shown and insert the GROMMET into the SIDE ACCESS HOLE. Connect the WIRE (K) leading from the MONOCOLUMN BRACKET (J) to the corresponding CONSOLE WIRE (L) fr
Краткое содержание страницы № 14
3.7 ACCESSORY TRAYS & CONSOLE Parts: Hardware Bag #5 (2, 8mm Phillips Screws) (4, 12mm Self-Tapping Screws) Tools: Phillips Screwdriver C3 Only: Locate the ACCESSORY TRAY (V). Position the ACCES- SORY TRAY near the top of the MONOCOLUMN (E) at the DIS- PLAY CONSOLE BRACKET (W).While holding the CONSOLE WIRE (X) and HEART RATE WIRE (Y), cut the wire tie securing the CONSOLE WIRES to the DISPLAY CONSOLE BRACKET. Feed the CONSOLE WIRES through the center hole of the ACCESSORY TRAY MOUNTING BRACKET
Краткое содержание страницы № 15
3.8 ASSEMBLE THE HANDLEBAR Parts: Hardware Bag #6 (4, 15mm Button Head Screws) (4, Flat Washers) Tools: 5mm Hex Head Wrench Locate the HANDLEBAR ASSEMBLY (CC). With the handlebars facing forward, position the HANDLEBAR ASSEMBLY near the top of the MONOCOLUMN (E). Connect the WIRES (DD) leading from the HANDLEBAR ASSEMBLY and the MONOCOLUMN. Slide the HANDLEBAR ASSEMBLY fully into the MONOCOLUMN. Secure the HANDLEBAR ASSEM- BLY to the MONOCOLUMN using four 15 mm BUTTON HEAD SCREWS (14) and matchi
Краткое содержание страницы № 16
3.9 PEDALS Tools: 15mm Open End Wrench Locate the RIGHT PEDAL (EE) (marked with an "R") and PEDAL STRAP (FF) (marked with an "R"). With the side of the PEDAL STRAP marked with an “R” facing upward, slide the slotted end of the PEDAL STRAP through the left slot in the PEDAL. Fasten one of the slots onto the tab located under the left slot of the PEDAL. Bend the PEDAL STRAP upward and slide the remaining end of the PEDAL STRAP through the right slot in the PEDAL and into the strap adjustment clip.
Краткое содержание страницы № 17
4 INITIAL SETUP Read the entire User Manual before setting up the Lifecycle exercise bike. WHERE TO PLACE THE EXERCISE BIKE Following all safety instructions in Section 1.1, move the bike to the location in which it will be used. See Section 7, Specifications, for the dimensions of the footprint. Allow a distance of 4 feet (120 centimeters) between the bike and other objects or surfaces on either side. HOW TO STABILIZE THE EXERCISE BIKE After placing the bike in position, check the unit's stabil
Краткое содержание страницы № 18
HOW TO ADJUST THE PEDAL STRAPS The bike pedal safety straps keep the user's shoes on the pedals during a workout. The straps should fit comfortably, but they also should be tight enough to prevent shoes from slipping at any point in the pedaling rotation. Before working out, the user should test and adjust the tightness of the straps. The straps can be adjusted to fit a variety of shoe sizes. Each strap is held in place by a spring-loaded clip that is connected to the outer edge of each pedal. T
Краткое содержание страницы № 19
5 MAIN FEATURES 5.1 ACCESSORIES Two accessory trays (A) are mounted above the handlebars on the C3 to provide storage for items such as water bottles, personal stereos, and cell phones. A Water Bottle Holder (B) is located on the monocolumn of the C1. Additionally, an integrated Reading Rack (C) for supporting a book or magazine is located at the base of the console. 5.2 CONTACT HEART RATE The hand pulse sensors (D) are a built-in heart rate monitoring system on the stationary handlebar. During
Краткое содержание страницы № 20
6 SERVICE & PRODUCT MAINTENANCE 6.1 TROUBLESHOOTING Problem Cause / Solution Check to see that the power cord is fully plugged into the back of the Lifecycle exercise bike and into the wall. Make sure the power cord is fully seated into the back of the Lifecycle exercise bike. You may be in “Energy Saver Mode”. Press the “Energy Saver” button to No power. see if the console turns on. Verify that all customer assembly connections are working properly. Unplug and re-plug each connection to verify
