Руководство по эксплуатации Chauvet SCORPION GVC

Краткое содержание страницы № 1

User Manual

Краткое содержание страницы № 2

TABLE OF CONTENTS 1. Before you Begin ............................................................................ 3 What is Included ........................................................................................ 3 Unpacking Instructions .............................................................................. 3 Text Conventions ...................................................................................... 3 Icons ............................................

Краткое содержание страницы № 3

1. BEFORE YOU BEGIN What is Included • 1 x Scorpion™ GVC, RVM, or RGY • 1 x Power Cord • 1 x Warranty Card • 1 x User Manual Unpacking Instructions Immediately upon receiving this product, carefully unpack it and check the container in which you received it. Make sure that you have received all the parts indicated above and that they are all in good condition. If the material inside the container (this product and any other accessory included with it) appears damage

Краткое содержание страницы № 4

Product at a Glance Use on Dimmer Auto Programs   Outdoor Use Auto-ranging Power Supply   Sound Activated Replaceable Fuse   DMX User Serviceable   Master/Slave Duty Cycle   Safety Notes Please read the following notes carefully because they include important safety information about the installation, usage, and maintenance of this product. • Keep this User Manual for future consultation. If you sell this product to another user, be sure t

Краткое содержание страницы № 5

Safety Notes (Cont.) • Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light. • This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes. • It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could get direct laser beams or bright reflections into their eyes. • It is a US Federal offense to shine any laser at

Краткое содержание страницы № 6

Laser Safety Notes STOP AND READ ALL THE LASER SAFETY NOTES BELOW Laser Light is different from any other light sources with which you may be familiar. The light from this product can potentially cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light from any other kind of light source. This concentration of light can cause instant eye injuries, primarily by burning the retina (the light sensitive portion at the bac

Краткое содержание страницы № 7

Laser Safety Labels NOTICE Scorpion™ GVC sticker shown The sticker on your unit will reflect the actual Scorpion™ fixture model, whether GVC, RGY, or RVM. Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k) Page 7 of 26

Краткое содержание страницы № 8

Laser Emission Data LASER EXPOSURE WARNING Laser light - Avoid direct eye contact! Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the Int

Краткое содержание страницы № 9

2. INTRODUCTION Product Overview Control Panel Fuse holder (LED display) Power Switch DMX Out Power In Power Out DMX In Safety Back Panel Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k) Page 9 of 26

Краткое содержание страницы № 10

Product Dimensions Page 10 of 26 Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k)

Краткое содержание страницы № 11

3. SETUP AC Power This product has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating indicates its average current draw under normal conditions. Always connect this product to a protected circuit (circuit breaker or fuse), ma

Краткое содержание страницы № 12

Mounting Orientation The Scorpion™ GVC/RVM/RGY units may be mounted in any position, provided there is adequate room for ventilation. Rigging Be sure that the structure onto which you are mounting this product can support its weight. Please see the “Technical Specifications” section of this manual for weight information. Mount the fixture securely. You can do this with a screw, a nut, and a bolt. You could also use a mounting clamp if rigging this product onto a

Краткое содержание страницы № 13

Proper Usage This fixture is for overhead mounting only. For safety purposes, CHAUVET® recommends mounting your lighting effect fixtures on steady elevated platforms or sturdy overhead supports using suitable hanging clamps. In all cases, you must use safety cables. You can obtain appropriate mounting hardware from your lighting vendor. International laser safety regulations require that laser fixtures must be operated in the fashion illustrated below, with a minimum of 3 me

Краткое содержание страницы № 14

4. OPERATION Control Panel Operation To access the control panel functions, use the four buttons located underneath the display. Button Function Press to find an operation mode or

to back out of the current menu option Press to scroll down the list of options or to find a lower value Press to scroll up the list of options or to find a higher value Press to activate a menu option or a selected value Menu Branches The menu

Краткое содержание страницы № 15

Menu Options The menu below refers to three different CMY products, GVC, RVM, and RGY, each with a different set of colors. Model Color 1 Color 2 Color 3 GVC Green Violet Cyan RVM Red Violet Magenta RGY Red Green Yellow Branch Programming Steps Description AF1 Fast program shows color 1 AS1 Slow program shows color 1 AF2 Fast program shows color 2 AS2 Slow program shows color 2 AF3 Fast program shows color 3 AS3 Slow program shows color 3 AFM Fast p

Краткое содержание страницы № 16

Configuration DMX Mode Setting this product to operate in DMX mode will allow you to control it with a DMX controller. 1) Connect this product to a suitable power outlet. 2) Turn this product on. 3) Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket of this product. Starting Address When selecting a starting DMX address, you must always consider the number of DMX channels assigned to the selected DMX mode. If you choose a star

Краткое содержание страницы № 17

Automatic Mode To enable the Automatic mode, follow the instructions below: 1) Press

repeatedly until the active option of the Auto/Sound branch (AF1 to rdM) shows blinking on the display. 2) Use or to select an automatic program (AF1~ASM). 3) Press (the new auto program will show solid on the display). Laser Sky Color Mode To enable the Laser Sky Color mode, follow the instructions below: 1) Press repeatedly until the active option

Краткое содержание страницы № 18

Master/Slave Mode This mode allows a single Scorpion™ GVC/RVM/RGY fixture (the “master”) to control the actions of one or more Scorpion™ GVC/RVM/RGY units (the “slaves”) without the need of a DMX controller. The master unit will be set to operate in either Automatic, Sound, or Laser Sky mode, while the slave units will be set to operate in Slave Mode. Once set and connected, the slave units will operate in unison with the master unit. Configure the units as indicated below. S

Краткое содержание страницы № 19

DMX Channel Assignments and Values Channel Function Value Setting 000  017 Manual Mode 018  035 Automatic fast color 1 036  053 Automatic slow color 1 054  071 Automatic fast color 2 072  089 Automatic slow color 2 090  107 Automatic fast color 3 Control Mode 108  125 Automatic slow color 3 1 (Use channels 2~10 in this 126  143 Automatic fast mixed colors mode) 144  161 Automatic slow mixed colors 162  179 Sound color 1 180  197 Sound color 2 198  215 S

Краткое содержание страницы № 20

DMX Ch.2 Pattern Selection DMX VALUE PATTERN DMX VALUE PATTERN DMX VALUE PATTERN 000~007 096~103 190~197 008~015 104~111 198~205 016~023 112~119 206~213 024~031 120~127 214~221 032~039 128~135 222~229 040~047 136~143 230~237 048~055 144~151 238~245 056~063 152~159 246~255 064~071 160~167 072~079 168~175 080~087 176~181 088~095 182~189 Page 20 of 26