Краткое содержание страницы № 1
GBC 1264WF/1244WF Operation Manual
GBC TITAN 1264WF/1244WF
INSTALLATION & OPERATING MANUAL
Part Number: 930-144 Rev A.
GB Operating Instructions
I Istruzioni per l'Uso
D Bedienungsanleitungen
NL Gebruiksaanwijzing
Part Number:
F Mode d'Emploi
1264 WF 3600242
1244 WF 3600238
E Instrucciones de Operación
© 2006 General Binding Corporation Page 1
Краткое содержание страницы № 2
GBC 1264WF/1244WF Operation Manual GB The information in this publication is provided for reference and is believed to be accurate and complete. General Binding Corporation (G BC) is not liable for errors in this publication or for incidental or consequential damage in connection with the furnishing or use of the information in this publication, including, but not limited to, any implied warranty of fitness or merchantability for any particular use. GBC reserves the right to make changes to t
Краткое содержание страницы № 3
GBC 1264WF/1244WF Operation Manual TABLE OF CONTENTS Page Page Description Description No. No. Top/Bottom Temperature Control Cover 1 18 Legal Disclaimer 2 Stop 18 Table of Contents 3 Reverse 18 Important Safety Instructions 4 Auto-Off 19 Important Safeguards 4 Ready 19 General ,Electric & Service Wait 19 Warranty 5 Specifications 5 Section 8-Safety: Pre- Installation 6 Emergency Stops 20 Installation 6 Safety Shield 20 Feed Table 21 Section 1-Detailed Specifications: Description 7 Section 9-How
Краткое содержание страницы № 4
GBC 1264WF/1244WF Operation Manual IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS YOUR SAFETY AS WELL AS THE SAFETY OF WARNING: TO GUARD AGAINST INJURY OTHERS IS IMPORTANT TO GBC. IN THIS THE FOLLOWING SAFETY INSTRUCTION MANUAL AND ON THE PRODUCT, PRECAUTIONS MUST BE OBSERVED IN YOU WILL FIND IMPORTANT SAFETY MESSAGES INSTALLATION AND USE OF THE REGARDING THE PRODUCT. READ THESE LAMINATOR. MESSAGES CAREFULLY. READ ALL OF THE General: INSTRUCTIONS AND SAVE THESE Keep hands, long hair, loose c
Краткое содержание страницы № 5
GBC 1264WF/1244WF Operation Manual This limited warranty shall be void if the laminator has been WARRANTY misused; mishandled; damaged by negligence, by accident, during shipment, or due to exposure to extreme conditions; Limited 90- Day Warranty repaired, altered, moved, or installed by anyone other than GBC or its authorized agents; or if incompatible film was used. GBC warrants to the original purchaser for a period of ninety days on labor and one year on parts after installation that this GB
Краткое содержание страницы № 6
GBC 1264WF/1244WF Operation Manual PRE-INSTALLATION Before a 1264WF/1244WF Laminator can be installed, ensure the following requirements are met: 1. Are doorways and hallways wide enough for the laminator to be moved to the installation site? 2. Is there ample room for the laminator? A work area must be established that allows for operation in both the front and rear of the laminator and provides space for efficient material flow. 3. Is the environment appropriate for the laminator? The lami
Краткое содержание страницы № 7
GBC 1264WF/1244WF Operation Manual Section 1: Detailed Specifications Specifications provide all of the technical data for the Titan 1244WF &1264WF Description: A high speed laminator for the graphic arts professional as well as for the manufacturer who produces promotional pieces in-house. A new elegant design, low power consumption and first class safety and quality assurances. Features: Roller heating technology Independent control of each heater Thermal and cold lamination capabilit
Краткое содержание страницы № 8
GBC 1264WF/1244WF Operation Manual Section 2: Consumables Poly-in films, thermal and PSA films Film Types: Poly-out films, thermal and PSA Accushield Film Diameters: Up to a 7 in. outside roll diameter. (18 cm.) 3 in. core standard. (76 cm.) Core Size: Film widths: 1264WF 61 in. Thermal films (1 55 cm.) 62 in. PSA (157 cm.) 12444WF 42 in. maximum paper width (107 cm.) 42 in. PSA films (107 cm.) Paper widths: 1264WF 62 in. Maximum paper width ( 157 cm.)
Краткое содержание страницы № 9
GBC 1264WF/1244WF Operation Manual Section 3: Function 0-10 fpm ( 0-6.1mpm) Speed: DC Geared Motor Motor: Heating Capabilities: Up to 320* F. (1 60*C) Controls: Operations control panel Roll Design: High release silicone main rollers High release pull roll Section 4: Electrical Requirements: 230 VAC, 60Hz, Single phase, 30Amps. 1264 WF: 230 VAC, 50Hz. Single phase, 20Amps. 1264WF CE: 230 VAC, 60Hz. Single phase, 20 Amps. 1244 WF: 230 VAC, 50Hz. Single phase, 20 Amps.
Краткое содержание страницы № 10
GBC 1264WF/1244WF Operation Manual Heater Wattage: 1264 WF: 4500W / Heater 1264WF CE: 3300W / Heater 1244 WF: 3000 W / Heater 1244WF CE: Amperage draw: Drive Motor=3.3 Amps. 1264 WF: Fan Motor=0.5 Amps. Motors and Heater=25 Amps. 1264WF CE: Drive Motor=3.3 Amps. Fan Motor=0.5 Amps. Motors and Heater=13 Amps. 1244 WF: Drive Motor=3.3 Amps 1244WF CE: Fan Motor=0.5 Amps Motors and Heater=12Amps D/C Voltage used: 36 VDC Motor Voltage 24 VDC Fan Motor 230
Краткое содержание страницы № 11
GBC 1264WF/1244WF Operation Manual Connectors for 1264 WF Connectors for 1244 WF NEMA 6-20 P NEMA 6-30 P NEMA 6-20 R NEMA 6-30 R © 2006 General Binding Corporation Page 11
Краткое содержание страницы № 12
GBC 1264WF/1244WF Operation Manual Section 5: Dimensions Weight: 1264 WF: Crated: 750 lbs. (340 kg.) 1264WF CE: Uncrated: 600 lbs. ( 272 kg.) 1244 WF: Crated: 350 lbs (159 kg.) 1244WF CE: Uncrated: 275 lbs (125 kg.) Dimensions: 1264 WF: Crated: 58 in.( H) x 87 in. ( W) x 40 in. (D) 1264WF CE: 147 cm. (H) x 221 cm. (W) x 102 cm. (D) Uncrated: 49in( H) x 77.25 in.(W ) x 25.5 in. ( D) 124 cm. (H) x196 cm. ( W) x65
Краткое содержание страницы № 13
GBC 1264WF/1244WF Operation Manual Section 6: Know your Laminator This section is intended to aide the user in becoming more familiar with the 1244 WF & 1264 WF laminators. Refer back to this section if you have questions regarding references to certain parts of the laminator in this laminator. 1.) S afety Shield 9.) R ewind Clutch Adjustment Knob 2.) C ontrol Panel 10.) R ewind Shaft & Rewind Tube 3.) F eed Table 11.) R ear Slitter 4.) L ower Film Shaft/Unwind Shaft 12.) P ower Switch
Краткое содержание страницы № 14
GBC 1264WF/1244WF Operation Manual © 2006 General Binding Corporation Page 14
Краткое содержание страницы № 15
GBC 1264WF/1244WF Operation Manual © 2006 General Binding Corporation Page 15
Краткое содержание страницы № 16
GBC 1264WF/1244WF Operation Manual 8.) Emergency Stop/E-Stop: Know your Laminator Continued- The Emergency/E-Stops are a safety feature that allows the operator to stop 1.) Safety Shield: the rollers from rotating by depressing The Safety Shield aids in preventing the them as needed. operators fingers from becoming pinched or burned in the heat rollers of 9.) Rewind Clutch Knob: the laminator. With the Safety Shield The rewinder is clutch driven. As you raised or removed, the machine
Краткое содержание страницы № 17
GBC 1264WF/1244WF Operation Manual Section 7: Display Control Panel Stand-by Pressing STAND-BY will cause the laminator to go into the AUTO-OFF mode. The laminator will automatically go into this mode after sitting idle for an extended amount of time. When in AUTO-OFF mode the laminator will no longer continue to heat the main rollers to save power. Stand-by Pressing MEMORY will cause the current speed and heat settings to be recorded in the JOB memory location shown on the display. Jobs Pressi
Краткое содержание страницы № 18
GBC 1264WF/1244WF Operation Manual Display Control Panel-Continued Top and Bottom Temperature Use the up or down arrow keys to increase or decrease the set temperature of the heat rollers. The temperature shown on the display is the temperature at which the unit is attempting to attain. For example if the unit is set to 200*F even though the actual roller temperature may be higher or lower. To view the actual temperature press MEASURE. Stop The STOP button ceases the forward rotation of the ro
Краткое содержание страницы № 19
GBC 1264WF/1244WF Operation Manual Display Control Panel-Continued Fig. A The Temperature displayed in the area referred to as TOP TEMPERATURE and BOTTOM TEMPERATURE is the value that the laminator is attempting to attain. Pressing the MEASURE button will momentarily display the actual roller temperature. The current speed and job settings are given on the right side of the display. The current state of the heat rollers is given on the lower portion of the display. The unit will always be in on
Краткое содержание страницы № 20
GBC 1264WF/1244WF Operation Manual Section 8: Safety The 1244Wf & 1264 WF have numerous safety features that will help keep the operator safe from harm. But for these features to work correctly, the user must become familiar with each of the safety mechanisms as well as never override a safety feature. Emergency Stop/E-Stop Two Emergency Stops (Sometimes referred to as E-Stops) a re located on the 1244 WF & 1264 WF laminators. See the “Know your Laminator” section for the locations. Pressing
