Краткое содержание страницы № 1
INSTALLATION AND OPERATION MANUAL
Free-Standing
Pellet Stove
Save These Instructions
For Future Reference
P/N 775,228M, Rev. C, 11/2008
Pellet Stoves
Model Winslow™ (PS40)
A French manual is available upon request. Order P/N 775,228CF.
Portland Ce manuel d’installation est disponible en francais, simplement en faire la demande. Numéro de la pièce
775,228CF.
US
Report No. 050-S-13-2 These appliances must be properly installed and operated in order to prevent the possibility
of a house fire. P
Краткое содержание страницы № 2
11. APPROVED FUEL: This appliance is designed specifically IMPORTANT SAFETY AND WARNIING for use only with pelletized wood fuels only. This appliance is designed and approved for the burning of wood residue INFORMATION pellets with up to 3% ash content. This appliance is NOT approved to burn cardboard, nut hulls, cherry pits, corn, etc. READ THIS MANUAL IN ITS ENTIRETY AND UNDER- regardless if it is in pellet form. Failure to comply with this STAND THESE RULES TO FOLLOW FOR SAFETY. restri
Краткое содержание страницы № 3
Pellet Fuel ...............................................................Page.20 CONGRATULATIONS! Corn Fuel ................................................................Page.20 When you purchased your new pellet stove, you joined the ranks of Cautions .................................................................Page.20 thousands of individuals whose answer to their home heating needs, Cleaning and Maintenance .............................................Page.21-25 aesthetics, ef
Краткое содержание страницы № 4
Surge Protectors - A surge protector is recommended to ensure the PLANNING YOUR INSTALLATION stove’s electrical components are not damaged due to a surge in the electrical supply. Only high quality protectors should be used - cheap Questions To Ask Local Building Official ones do not provide the protection needed. A correct installation is critical and imperative for reducing fire hazards and perilous conditions that can arise when wood pellet burning appliances Smoke Detectors - Since ther
Краткое содержание страницы № 5
Wood pellets manufactured to the pellet fuels institute (P.F.I.) certification FEATURES AND SPECIFICATIONS standard are available in two grades, Standard and Premium. The primary difference between the two is the ash content of the pellets. Installation Options The P.F.I. specification for standard grade and premium grade residential • Residential pellet fuel is as follows: • Vented vertical and horizontal (see venting instructions) • Manufactured home and mobile home • CHLORIDES (Salt)
Краткое содержание страницы № 6
STOVE DIMENSIONS 4-1/8” (105mm) 1” (5mm) Exhaust Air Intake 6-1/4” Front View Side View (667mm) 31” (787mm) 8 C/L Top View Figure 2B Figure1 Front View CLEARANCES TO COMBUSTIBLES 3-1/4” (591mm) IMPORTANT • Minimum clearances specified may not allow for ease of operation and maintenance (please take this in to account when planning the ins
Краткое содержание страницы № 7
Parallel Installations Corner Installations Vertical Venting Left Wall Horizontal Venting 17-1/4” (4 3mm) 3” (76mm) 8” ( 03mm) See Vent Manufactures Clearances Top Vent 6” (15 mm) 3” Figure3 (76mm) Corner Installations Right Wall Horizontal Venting 8” 6-3/4” ( 03mm) (17 mm) Figure6 7” (178mm) Horizontal Venting 7” (178mm) Figure 4 3” (76mm) Corner Installations Vertical Venting 5-7/8” 5-7/8” (149mm) (149mm) 8” ( 03mm) Figure 7 Figure 5 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Краткое содержание страницы № 8
Alcove Installations Minimum Size Hearth Protection Minimum alcove height is 41” (1041 mm), minimum width is 42-1/4” (1073 9-5/8” 14-1/4” 9-5/8” mm) and maximum depth is 48” (1219 mm). Note, it is quite difficult to (36 mm) ( 45mm) ( 45mm) load pellets into the hopper when installed in an alcove only 41” (1041 mm) high. For alcove wall clearances see parallel clearances below. 10-3/4” ( 73mm) Outline of Stove Base 8” 8-7/8” (711mm) ( 5mm) 8-7/8” ( 13mm) 41” (1041mm) 18-3/8” 7-9/16” 7
Краткое содержание страницы № 9
VENT TERMINATION LOCATIONS Air Supply Inlet Vent Terminal Vertical Terminal Area Where Terminal Is Not Permitted 24” (610mm) Vertical Terminal G (From Eave) 24” (610mm) A D E Fixed Closed B B N C H L M B B K F J A B Able To Open A = Clearance above grade, veranda, porch, deck, or balcony (min. L = Clearance to a mechanical air supply inlet *(min. 120”/3.1m) 12”/30cm) M = **Clearance above paved sidewalk or a paved driveway located on B = Clearance to window or door that may be opened (min. 12”/
Краткое содержание страницы № 10
INSTALLATION Horizontal Venting This stove is approved for venting with Type L and Type PL pellet vent pipe listed to UL 641 and ULC S609. We recommend the use of venting products manufactured by Security Chimneys International. Single wall pipe cannot be used with this pellet stove. The stove’s flue collar is 3” in diameter. An approved wall thimble or approved ceiling firestop must be used when the pellet pipe passes through a combustible wall or ceiling. The stove’s combustion blower pr
Краткое содержание страницы № 11
Masonry Chimney Fireplace When venting into a masonry chimney, the pellet pipe can terminate just When venting into a fireplace chimney, the pellet pipe can terminate just inside the chimney. However, it is recommended to run the pellet pipe to above the damper. However, it is recommended to run the pellet pipe to the top of the chimney. the top of the chimney. Figure16 Figure 18 Figure17 Figure 19 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. 11
Краткое содержание страницы № 12
Vertical Outside Air Installations If the length of pipe exceeds 15 feet, 4 inch pipe rather than 3 inch vent Connecting the Winslow PS40 stove to outside combustion air is optional, pipe should be used. except in mobile home installations and when required by local build- ing codes. The stove’s air intake will accept 3” ID pipe to accommodate outside air installations. The air intake on the exterior of the home should Rain Cap always be located substantially below the flue termination and
Краткое содержание страницы № 13
Door Trim Installation Instructions (A) Parts List (A): Trim Pieces Qty (2) Trim Pieces (Gold, Nickel, Brushed Nickel or Black Nickel ) (6) #10 nuts (6) #10 washers Trim Screws Tools Needed: #10 washers Qty Figure 23 (1) 3/8” nut driver or socket wrench CAUTION: Always ensure that plated surfaces are clean and free of fingerprints before lighting stove. Fingerprints will leave permanent blemishes if left on plated surface when lit. When installation is complete, the trim should be g
Краткое содержание страницы № 14
4. Place one washer on each stud. Using a 3/8” nut driver, snug up the nuts on each piece of trim. Do not finish tightening the nuts yet. See Figure 27 . 5. There should be approximately a 7/8” (22 mm) gap between the top edge of the upper trim and the top edge of the door and a 1-1/2” (38 mm) gap between the bottom trim to the bottom of the door. Visually inspect the alignment of the trim and adjust if necessary. See Figure 28. 6. Finish tightening nuts. CAUTION - DO NOT OVER-TIGHTEN NUTS
Краткое содержание страницы № 15
Door Grill Installation Instructions 3. Rotate the grill back to the horizontal position and re-install the four button head screws through the two holes at each end of the grill and Parts Needed: into the stove body. See Figure31 . Qty (4) Button Head Screws (already in place in stove) Tools Required: Qty (1) 1/8” allen wrench Rotate Grill Back To Horizontal Position To install the Grill: 1. Remove the four button head screws from body of the stove with a 1/8” allen wrench. See Figure2
Краткое содержание страницы № 16
Brick Panel Installation 2. Remove all pellets and ash from the firebox to ensure a proper fit for the brick panel. Option: Part #79030 3. Insert the brick panel, top first, as shown in Figure 35. The two cut Kit Contents: out corners should be at the bottom. - Brick Panel (A) - 4 Tap Tights (B) Tools Required: - Drill (90° drill recommended) - #18 drill bit - 5/32 allen wrench A Figure35 B Figure 33 4. Make sure that the brick panel is centered, with equal space on either side of the au
Краткое содержание страницы № 17
5. Screw in the four tap tights, included with this kit, using a 5/32 allen 6. Replace the Burn-Pot and check that it is firmly in place (if you can wrench. rotate the Burn-Pot it is not installed correctly). If present, install the optional log set according to the log set installation instructions (included with your log set). 7. Re-hang the door by reversing the instructions in step 1. Figure 37 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. 17
Краткое содержание страницы № 18
Log Set installation Instructions Kit Contents Part #H514 Qty (1) left log (B) (1) right log (C) (1) front log (D) (2) log support brackets (E) cut lines C B Figure39 Bracket correctly placed D E E Figure 38 Figure 40 Tools Required: None B C CAUTION: The logs can be damaged if they are not handled with care! To Install the log set: 1. Remove the two log support brackets from the box and bend the ends of the brackets 90 degrees at the cut lines. See Figure 39 . D 2. One bracket goes
Краткое содержание страницы № 19
2. Push the start button and the ignite and feeding lights will come on OPERATION and the lighting sequence will begin. For about the next 15 minutes the stove will feed pellets cyclically into the Burn-Pot, the combustion Control Board blower will come on and the igniter will heat up. During this sequence, some smoke in the firebox is to be expected. After the igniting sequence The control board regulates all functions of the stove. The following is a is complete, the stove will begin burn
Краткое содержание страницы № 20
Shut Down Once you find a pellet brand that burns well, continue using this brand. High ash fuel increases the frequency of stove cleaning. Fuel with an Normal - To turn the stove off, turn the heat selector knob to off. The excessive moisture content may jam the auger assembly. fans will continue to operate until the control board completes the shut down cycle. Corn Fuel Power Outage - If the stove loses electrical power for less than 10 seconds Shelled corn can be burned in the Winslow PS4
