Руководство по эксплуатации Emerson CF796HGMO0

Краткое содержание страницы № 1

READ AND SAVE THESE INSTRUCTIONS
®
™
HARDWOOD
Model No.
Ceiling Fan
CF796HGMO0
Owner's Manual
CF796CW0
Net Weight: 16.2 Lbs. CF796MP0
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
You must be the original purchaser or user of the product to be covered.
What The Period Of Coverage Is:
As it applies to the motor, this warranty will last for thirty year

Краткое содержание страницы № 2

! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of

Краткое содержание страницы № 3

This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver One stepladder 50-100 ft. 12 One 1/4” blade screwdriver One wire stripper Three wire connectors (supplied). ! WARNING MATERIALS Before assembly your ceiling fan, refer to section on proper method of wiring your fan (page 6). If you feel Wiring outlet box and box con

Краткое содержание страницы № 4

(3) 3/16-24 x 5/16" SLOTTED How to Put Your Ceiling PHILLIPS BLADE SCREWS Fan Together (3) BLADE WASHERS 1. Pass the 80" motor leads through the opening in the ceiling cover. Be sure the cover is oriented cor- rectly. 2. Separate, untwist and unkink the three motor leads. Route the motor leads through the hanger ball/downrod assembly. 3. Loosen the upper two 3/16-24 x 3/8” setscrews in BLADE FLANGE the motor coupling. Align the clevis pin holes in the downrod with the holes in the motor cou

Краткое содержание страницы № 5

10. Remove the three switch housing screws from the SWITCH switch housing plate. Position the switch housing HOUSING ASSEMBLY assembly on the switch housing plate and align the holes in the switch housing assembly with the holes in the plate. Secure the switch housing assembly by installing the three screws (Figure 5). ! WARNING To avoid possible fire or shock, do not pinch wires between the switch housing assembly and the switch housing plate. 11. You have now completed the assembly of your ne

Краткое содержание страницы № 6

SUPPLY WIRES AND NOTE: CEILING COVER, OUTLET FAN WIRES OMITTED ! WARNING SUPPLY WIRES AND FAN BOX FOR CLARITY. WIRES OMITTED FOR CLARITY. Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result. HANGER BRACKET 3. Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket. HANGER BALL/ Figure 8 DOWNROD

Краткое содержание страницы № 7

! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan, or loose 2. Check line wire connections to fan and switch wire switch wire connections in the switch housing. connections in the switch housing. ! WARNING: Make sure main

Краткое содержание страницы № 8

Repair Parts Listing Model No. Key No. Description CF795HGMO0 CF795CWO CF795MP0 * Hanger Ball Assembly, 760750-1 760750-1 760750-24 Consisting of: 1 Hanger Bracket — — — 2 Hanger Ball — — — 3 Downrod — — — * Parts Bag Containing: 761442-1 761442-1 761442-2 4 Wire Connector (3) — — — 6 Pin, Clevis — — — 7 Clip, Hairpin — — — 8 Screw, 1/4-20 x 1/2” Phillips Oval Flange (11) — — — 9 Screw, 3/16-24 x 5/16” Phillips Blade (16) — — — 10 Wood Ball — — — 15 Threaded Stud (2) — — — 16 Lockwasher (2) — —