Руководство по эксплуатации Emerson CF705AB03

Краткое содержание страницы № 1

READ AND SAVE THESE INSTRUCTIONS
®
52” NORTHWIND
Model No.
CF705WW03 CF705PB03
Ceiling Fan
CF705AB03 CF705WPB03
Owner's Manual
CF705W03 CF705OB03
CF705HTW03 CF705TG03
CF705NW03 CF705BS03
Net Weight: 14.4 Lbs.
CF705S03 CF705AW03
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
You must be the original purchaser or user of the product to be covered.
What

Краткое содержание страницы № 2

WARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of

Краткое содержание страницы № 3

This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly One Phillips head screwdriver One stepladder Installed Wire Length Wire Size A.W.G. One 1/4” blade screwdriver One wire stripper Up to 50 ft. 14 One 5/16” open end wrench, or pliers 50-100 ft. 12 Three wire connectors (supplied). ! WARNING MATERIALS Before assembly your ceiling fan, refer to section on Wiring outlet box and box connectors must be of

Краткое содержание страницы № 4

How to Put Your Ceiling Fan Together 1. Pass the 80" motor leads through the opening in WARNING ! the ceiling cover. Be sure the cover is oriented correctly (Figure 1). To reduce the risk of personal injury, do not bend the 2. Separate, untwist and unkink the three motor blade flange when installing the blade flanges, bal- leads. Route the motor leads through the hanger ancing the blades or cleaning the fan. Do not insert ball/downrod assembly. foreign objects in between rotating fan blades. 3.

Краткое содержание страницы № 5

SWITCH ! WARNING HOUSING ASSEMBLY Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electri- cal shock. ! WARNING To avoid fire or shock, follow all wiring instructions carefully. Any electrical work not described in these instructions SWITCH HOUSING should b

Краткое содержание страницы № 6

2. Carefully lift the fan and seat the hanger ball/ After connections have been made, turn leads downrod assembly on the hanger bracket that was upward and carefully push leads into the outlet just attached to the outlet box (Figure 8). Be sure box, with the white and green leads on one side of the groove in the ball is lined up with tab on the the outlet box and the black and blue leads on the hanger bracket (Figure 7). other side of the outlet box. NOTE: CEILING COVER BLACK AND BLUE WARNING !

Краткое содержание страницы № 7

Using Your Ceiling Fan 1. Restore electrical power to the outlet box by turning Your fan model is equipped with a 4-position, the electricity on at the main fuse box. 3-speed pull chain switch. The operating sequence is as follows: 2. Check the operation of the fan by gently pulling on the pull chain switch. 3. All fans are shipped from the factory with the reversing switch positioned to circulate air down- THREE-SPEED ward. If airflow is desired in opposite direction, turn 1st Pull—HIGH REVERSI

Краткое содержание страницы № 8

Repair Parts Listing Key Model No. No. Description CF705WW03 CF705PB03 CF705AB03 CF705W03 CF705WPB03 CF705OB03 CF705HTW03 CF705TG03 * Hanger Ball Assembly, 760750-3 760750-1 760750 760750-2 760750-3 760750-36 760750-34 760750-37 Consisting of: 1 Hanger Bracket — — — — — — — — 2 Hanger Ball — — — — — — — — 3 Downrod — — — — — — — — * Parts Bag Containing: 761936 761936-3 761936-1 761936-3 761936-3 761936-1 761936 761936-1 4 Wire Connector (3) — — — — — — — — 5 Threaded Stud (2) — — — — — — — — 7