Руководство по эксплуатации Homelite HHC150A

Руководство по эксплуатации для устройства Homelite HHC150A

Устройство: Homelite HHC150A
Категория: Электрический подогреватель
Производитель: Homelite
Размер: 0.5 MB
Добавлено: 3/16/2014
Количество страниц: 40
Печатать инструкцию

Скачать

Как пользоваться?

Наша цель - обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства Homelite HHC150A. Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с Homelite HHC150A.

Для Вашего удобства

Если просмотр руководства Homelite HHC150A непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

  • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции Homelite HHC150A на полном экране, используйте кнопку Полный экран.
  • Скачивание на компьютер - Вы можете также скачать инструкцию Homelite HHC150A на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
Homelite HHC150A Руководство по эксплуатации - Online PDF
Advertisement
« Page 1 of 40 »
Advertisement
Печатная версия

Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше - Печатать инструкцию. Вам не обязательно печатать всю инструкцию Homelite HHC150A а только некоторые страницы. Берегите бумагу.

Резюме

Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для Homelite HHC150A. Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

Краткое содержание
Краткое содержание страницы № 1

PART NO. 18127-C
Printed in U.S.A.
PORTABLE
SPACE HEATER
OWNER’S MANUAL
50 SIDE PFA/PV 010A
100 SIDE FRONT HANDLES PFA/PV 003
Models: HHC35A, HHC100A, and HHC150A
IMPORTANT
Read and understand this manual before assembling, starting, or servicing heater.
Improper use of heater can cause serious injury. Keep this manual for future reference.
NOTICE: For Servicing Dealer Information, see back page
CANADIAN ASSOCIATION GAS
APPROVED
R
This heater is certified by the Canadian Gas Association to Cana

Краткое содержание страницы № 2

SECTION PAGE CONTENTS Safety Information ......................................................................... 3 Product Identification .................................................................... 4 Unpacking...................................................................................... 5 Assembly ....................................................................................... 5 35 Model .............................................................................

Краткое содержание страницы № 3

IMPORTANT: Read this Owner’s Manual carefully and completely before trying SAFETY to assemble, operate, or service this heater. Improper use of this heater can cause serious injury or death from fire, explosion, electrical shock, and carbon monoxide INFORMATION poisoning. Read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater. ! WARNINGS WARNING ICON G 001 • Use only kerosene or No. 1 fuel oil. • Use only with the electr

Краткое содержание страницы № 4

PRODUCT Nose Cone Guard Hot Air Outlet IDENTIFICATION Upper Shell Handle Lower Shell Fan Guard Air Filter End Cover Fuel Tank Fuel Cap Side Cover Flame-Out Control Reset Button 35/70,000 BTU/HR CANADIAN PFA/PV 042A Power Cord Figure 1 - 35 Model Hot Air Upper Shell Outlet Lower Shell Fuel Cap Fan Guard Fuel Tank Side Cover Power Cord Flame-Out Control Reset Button Figure 2 - 100/150 Models 4 100577

Краткое содержание страницы № 5

1. Remove all protective packaging that has been applied to heater for shipment UNPACKING 2. Remove heater from carton. 3. Check heater for any shipping damage. If damage is found, promptly inform dealer where heater was purchased. This model is furnished with a nose cone guard. Nose cone guard and ASSEMBLY mounting screws are found in the shipping carton. (For 35 Model Only) Tools Needed • 5/16" Nut Driver or Wrench 1. Place nose cone guard on top of upper shell flange. Make sure nose cone guar

Краткое содержание страницы № 6

These models are furnished with wheels and a front handle. Wheels, front handle, ASSEMBLY and the mounting hardware is found in the shipping carton. (For 100 and 150 Models Only) Tools Needed • Medium Phillips Screwdriver • 3/8" Open or Adjustable Wrench • Hammer 1. Slide axle through wheel support frame. Install wheels on axle. IMPORTANT: Place extended hub of wheel toward wheel support frame. 2. Place cap nuts on axle ends. Gently tap with hammer to secure. 3. Place heater on wheel support fra

Краткое содержание страницы № 7

The Fuel System: An air pump is located on one end of the motor shaft. The THEORY OF air pump forces air through the air line. The air is then pushed through the burner head nozzle. The moving air causes fuel to be lifted from the tank. The fuel and air OPERATION mixture is sprayed into the combustion chamber in a fine mist. The Air System: The motor turns a fan which pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air. The Ignition Sys

Краткое содержание страницы № 8

FUELS ! WARNING Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, crankcase drainings, naphtha, paint thinners, alcohol, or other highly flammable fuels. Use only kerosene or No. 1 fuel oil. Do not use heavy fuels such as No. 2 fuel oil or No. 2 diesel. The use of heavy fuels will result in: • clogging of fuel filter and nozzle • carbon build up on spark plug • the need of non-toxic anti-icer in fuel during very cold weather Do not use No. 3 fuel o

Краткое содержание страницы № 9

4. Plug heater’s power cord into approved, grounded, three-wire extension cord. Extension cord must be at least six feet (1.8 meters) long. Extension Cord Size Requirement 2 6 to 10 feet (1.8 to 3 meters) long, use 18 AWG (0.75 mm ) rated cord 2 11 to 100 feet (3.3 to 30.5 meters) long, use 16 AWG (1.0 mm ) rated cord 2 101 to 200 feet (30.8 to 61 meters) long, use 14 AWG (1.5 mm ) rated cord 5. Plug extension cord into standard 120 volt/60 hertz, 3-prong grounded outlet. Heater will start when

Краткое содержание страницы № 10

Note: If shipping, transport companies require fuel tanks to be empty. STORING, 1. Drain fuel tank. Note: Some models have drain plug on underside of fuel tank. If so, remove TRANSPORTING, drain plug to drain all fuel. If heater does not have drain plug, drain fuel OR SHIPPING through fuel cap opening. Be sure all fuel is removed. 2. Replace drain plug if provided. 3. If any debris is noted in old fuel, add 1 or 2 quarts of clean kerosene to tank, stir, and drain again. This will prevent excess

Краткое содержание страницы № 11

TROUBLE- WARNING ! SHOOTING To avoid risk of burn and electrical shock, never attempt to service heater while it is plugged in, operating, or hot. OBSERVED FAULT POSSIBLE CAUSE REMEDY Incorrect pump pressure Heater ignites, but See Pump Pressure flame-out control Adjustment, page 13. shuts off heater after Dirty air output, air intake See Air Output, Air Intake a short period of and lint filters and Lint Filters, page 12. time. Dirty fuel filter See Fuel Filter, page 13. Dirt in nozzle See

Краткое содержание страницы № 12

SERVICE WARNING ! PROCEDURES To avoid risk of burn and electrical shock, never attempt to service heater while it is plugged in, operating or hot. Upper Upper Shell Removal Shell 1. Remove screws along each side of Fan heater using 5/16" nut-driver. These Guard screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. Figure 8 - Upper Shell Removal (35 Model Shown) Fan IMPORTANT: Remove fan from motor shaft before removing motor from heater. The weight of

Краткое содержание страницы № 13

Pump Pressure (35 Model Shown) Adjustment 1. Remove pressure gauge plug from Relief Pressure filter end cover. Valve Gauge 2. Install accessory pressure gauge Plug (part number 00529-02). 3. Start heater (see Operation, page 8). Pressure Allow motor to reach full speed. Gauge Figure 13 - Pressure Gauge Plug Removal 4. Adjust pressure. Turn relief valve to Pump right to increase pressure. Turn Model Pressure relief valve to left to decrease 35 3 PSI pressure. See specifications at right 100 4 P

Краткое содержание страницы № 14

Spark Plug Combustion Spark Plug Mounting Nut Chamber Burner (35 Model) Spark Strap 1. Remove upper shell (see page 12). Spark Plug Plug Cable 2. Remove fan (see page 12). 3. Remove fuel and air line hoses from nozzle assembly. 4. Remove spark plug cable from spark plug. 5. Remove two (2) screws using 5/16" nut-driver and remove burner strap. Nozzle Assembly 6. Place hex-body of spark plug into vise and tighten. Air Line Fuel Line Hose 7. Remove spark plug mounting nut Hose using 11/16" open-end

Краткое содержание страницы № 15

Combustion Nozzle Chamber (35 Model) 1. Remove upper shell (see page 12). 2. Remove fan (see page 12). Nozzle 3. Remove fuel and air line hoses Assembly from nozzle assembly. Burner Nozzle 4. Turn nozzle assembly 1/4 turn to Strap Assembly left and pull toward motor to remove. 5. Place plastic hex-body into vise and lightly tighten. 6. Carefully remove nozzle from the Fuel Line Hose Air Line Hose nozzle adapter using 5/8" socket wrench. Figure 22 - Removing Air and Fuel Figure 23 - Removing Nozz

Краткое содержание страницы № 16

12.Attach burner head to combustion Nozzle Nozzle Face chamber. Seal 13.Install spark plug in burner head. 14.Attach spark plug cable to spark plug. 15.Attach fuel and airline hoses to burner head. Nozzle 16.Replace fan (see page 12). 17.Replace fan guard and upper shell. Burner Head Fuel Line Air Line Fitting Fitting Figure 26 - Removing Nozzle, 100/150 Models Blade Pump Rotor Air Intake (Procedure if rotor is binding) Pump Filter 1. Remove upper shell (see page 12). Plate 2. Remove filter end

Краткое содержание страницы № 17

13.Perform steps 1 through 6 Gap Adjusting Screw (see page 16). 14.Place fine grade sandpaper (600 grit) on flat surface. .003"/.004" (.076-.101 mm) Sand rotor lightly in “Figure Gap Measured With 8” motion four times (see Feeler Gauge Figure 30). 15.Reinstall insert and rotor. 16.Perform steps 10 through 12 (see page 16). Blade Rotor Gap Adjusting Screw Figure 29 - Gap Adjusting Screw Locations Sandpaper Figure 30 - Sanding Rotor Model Size 35 100 150 SPECIFICATIONS Output Rating (Btu/Hr) 35,00

Краткое содержание страницы № 18

Power Plug WIRING 120V/60Hz DIAGRAMS White Black Green White White B White Flame- Green White Blue Blue Spark Plug Terminal Out Reset Ignitor Motor Board Control Button Photocell Red Red R Red Figure 31 - Wiring Diagram, 35 Model Power Plug 120V/60Hz White Black Green White White B White Flame- Green White Blue Blue Terminal Spark Plug Out Reset Ignitor Motor Board Button Control Photocell Red Red R Red Black Red Relay Figure 32 - Wiring Diagram, 100/150 Models 18 100577

Краткое содержание страницы № 19

ACCESSORIES Heater accessories and parts are AIR GAUGE KIT available at your local dealer. For all models. Special tool to check pump pressure. Order part number 00529-02. THERMOSTAT KIT For all models. Keeps your building at the temperature you select day and night. Helps economize on fuel. Order part number 01145-58. THERMOSTAT A 011 HEAVY DUTY WHEELS AND HANDLE KIT For heavy duty applications. HEAVY DUTY WHEELS & HANDLE KIT A 009A Makes your heater even more portable and convenient. Fits 35 m

Краткое содержание страницы № 20

HOMELITE 1850 55TH Avenue Lachine (Quebec) H8T 3J5 Unit 212-214 595 Canarctic Drive 590 Ebury Place Downsview, Ontario Annacis Island M3J 2P9 New Westminister, B.C. V3M 6K7 A Deere & Co. Affiliate / Une Filiale de Deere & Co.


Скачавание инструкции
# Руководство по эксплуатации Категория Скачать
1 Homelite HH35A Руководство по эксплуатации Электрический подогреватель 3
2 Homelite HH110 & HH150A Руководство по эксплуатации Электрический подогреватель 1
3 Homelite HH55 Руководство по эксплуатации Электрический подогреватель 0
4 Homelite HHC35A Руководство по эксплуатации Электрический подогреватель 0
5 Homelite HHC50LP Руководство по эксплуатации Электрический подогреватель 1
6 Homelite HP35 Руководство по эксплуатации Электрический подогреватель 0
7 Homelite HHC100A Руководство по эксплуатации Электрический подогреватель 0
8 Homelite HP155A Руководство по эксплуатации Электрический подогреватель 0
9 Homelite UT65052-A Руководство по эксплуатации Электрический подогреватель 0
10 Homelite HP275 Руководство по эксплуатации Электрический подогреватель 0
11 A.O. Smith AH - 290 Руководство по эксплуатации Электрический подогреватель 6
12 A.O. Smith AHD 290 Руководство по эксплуатации Электрический подогреватель 7
13 A.O. Smith AHDS 290 Руководство по эксплуатации Электрический подогреватель 0
14 A.O. Smith ST 3000 Руководство по эксплуатации Электрический подогреватель 5
15 A.O. Smith WATER HEATERS Руководство по эксплуатации Электрический подогреватель 13