Краткое содержание страницы № 1
DUAL DIN SIZED CD RECEIVER
DPX502
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on
Краткое содержание страницы № 2
Contents Safety precautions 3 HD Radio control features 22 About HD Radio Notes 4 Tuning General features 7 Menu system 23 Power Menu System Selecting the Source Activating Security Code Volume Deactivating Security Code Attenuator Touch Sensor Tone System Q Manual Clock Adjustment Audio Control Synchronize Clock Audio Setup Display Illumination Control Speaker Setting Dimmer Subwoofer Output Switching preout TEL Mute Built-in Amp Setting Switching Display Dual Zone System Setting Supreme Settin
Краткое содержание страницы № 3
Safety precautions Do Not Load 3-in. CDs in the CD slot 2WARNING If you try to load a 3 in. CD with its adapter into the To prevent injury or fire, take the following unit, the adapter might separate from the CD and precautions: damage the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside About CD players/disc changers connected the unit. to this unit • Do not watch or fix your eyes on the unit’s display Kenwood disc changers
Краткое содержание страницы № 4
Notes • If you experience problems during installation, Cleaning the Unit consult your Kenwood dealer. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. • When you purchase optional accessories, check with If the faceplate is stained badly, wipe the stain off with your Kenwood dealer to make sure that they work a cloth moistened with neutral cleaner, then wipe it with your model and in your area. again with a clean soft dry cloth. • We recomme
Краткое содержание страницы № 5
About Audio file About USB device • Playable Audio file • Install the USB device in the place where it will not prevent you from driving your vehicle properly. AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAV (.wav) • You cannot connect a USB device via a USB hub. • Playable disc media • Take backups of the audio files used with this unit. The files can be erased depending on the operating CD-R/RW/ROM conditions of the USB device. • Playable disc file format We shall have no compensation for
Краткое содержание страницы № 6
Notes Handling CDs 2CAUTION • Do not touch the recording surface of the CD. Use of controls or adjustments or performance of procedures other than those specified herein may • Do not stick tape etc. on the CD, or use a CD with result in hazardous radiation exposure. tape stuck on it. In compliance with Federal Regulations, following • Do not use disc type accessories. are reproductions of labels on, or inside the product • Clean from the center of the disc and move relating to laser produ
Краткое содержание страницы № 7
General features DISP Auxiliary input VOL Control knob ATT Q SRC Clock display LOUD indicator ATT indicator Power ⁄ • When connection of the iPod is recognized, the source Turning ON the Power display changes from "USB" to "iPod". Press the [SRC] button. • USB (iPod) source is recognized as CD source on the connected unit. Turning OFF the Power • Use the mini-plug which is stereo type and does not Press the [SRC] button for at least 1 second. have any resistance. Selecting the Source Volume
Краткое содержание страницы № 8
General features Attenuator Audio Control Turning the volume down quickly. 1 Select the source to adjust Press the [ATT] button. Press the [SRC] button. Each time you press the button, the Attenuator 2 Enter Audio Control mode turns ON and OFF. Press the [VOL] knob. When the Attenuator is ON, the "ATT" indicator blinks. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below. Sys
Краткое содержание страницы № 9
Audio Setup Speaker Setting Setting the Sound system, such as Cross over Fine-tuning so that the System Q value is optimal Network. when setting the speaker type. 1 Select the source to adjust 1 Enter Standby Press the [SRC] button. Press the [SRC] button. Select the "STANDBY" display. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Audio Setup item to adjust Press the [VOL] knob. 3 Select the Speaker type Each
Краткое содержание страницы № 10
General features TEL Mute Switching Display The audio system automatically mutes when a call Changing the information displayed. comes in. Press the [DISP] button. Each time the button is pressed the display When a call comes in switches as shown below. "CALL" is displayed. The audio system pauses. In Tuner source Information Display Listening to the audio during a call Press the [SRC] button. Program Service name or Frequency "FREQ/PS" (FM) The "CALL" display disappears and the audio system c
Краткое содержание страницы № 11
In Satellite radio source Information Display Channel name "CH NAME" Music title "SONG" Artist name "ARTIST" Composer name "COMPOSER" Category name "CATEGORY" Label name "LABEL" Comment "COMMENT" Band & Channel number "CH NUM" Clock "CLOCK" In Standby/ Auxiliary input source Information Display Source name "SRC NAME" Clock "CLOCK" ⁄ • When the music number exceeds 1000, only the last 3 digits of its number are displayed. • When you select the clock display, the display setting of each source w
Краткое содержание страницы № 12
Tuner features FM Control knob AUTO/AME AM SRC 1 - 6 Band display Frequency display ST indicator Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning mode Press the [SRC] button. alternates between the modes shown in the table Select the "TUNER" display. below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO 1"
Краткое содержание страницы № 13
Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is displayed. "– – – –" is displa
Краткое содержание страницы № 14
RDS features Control knob AUTO 1 - 6 Radio text TI indicator PTY indicator RDS indicator Radio Text Scroll 2 Select the Program Type Push the Control knob towards up or down. Scrolling the displayed radio text. No. Program Type Display Push the Control knob toward up for at least 2 1. Speech "SPEECH" seconds. 2. Music "MUSIC" ⁄ 3. News "NEWS" • When the (page 25) is set 4. Information "INFORM" to OFF, the display may black out while scrolling. 5. Sports "SPORTS"
Краткое содержание страницы № 15
21. Religious Music "REL MUSC" Program Type preset 22. Religious Talk "REL TALK" Putting the Program Type in the Preset button 23. Personality "PERSNLTY" memory and quick recall. 24. Public "PUBLIC" 25. College "COLLEGE" Presetting the Program Type 26. Weather "WEATHER" 1 Select the Program Type to preset Refer to (page 14). ⁄ • Speech and Music include the Program type below. 2 Preset the Program Type Music: No.7 — 19, 21 Press the desired [1] — [6] button for at least 2
Краткое содержание страницы № 16
CD/USB device/Audio file/External disc control features Control knob USB connector SRC S.MODE SCAN RDM/3/ REP F.SEL M.RDM A.RDM Track number Play time IN indicator Disc number Playing CD & Audio file USB Device Connection 1 Remove the cap and connect the When a disc is inserted USB cable. Press the [SRC] button. 2 Connect the USB device to the unit Select the "CD" display. using the USB cable. ⁄ • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the Control knob. Each time
Краткое содержание страницы № 17
Playing USB (iPod) device Drive Search Selecting the device inserted in the Multi Card When the USB device is not connected Reader. Connect the USB device 1 Put the playback to pause Playback of the file contained in the USB device Press the [S.MODE] button. starts. 2 Select a device When the USB device is connected Push the Control knob towards up or down. Select USB source 3 Restart playback Press the [SRC] button. Press the [S.MODE] button. Select the "USB" (or "iPod") display. ⁄ ⁄ • This
Краткое содержание страницы № 18
CD/USB device/Audio file/External disc control features Function of disc changer/ Audio file Playing External Disc Disc Search/Folder/Album Search Playing discs set in the optional accessory disc player connected to this unit. Switching between folders/albums contained in the disc in the disc changer, media, or device being Press the [SRC] button. played now. Select the display for the disc player you want. Display examples: Push the Control knob towards up or down. Display Disc player "CD C
Краткое содержание страницы № 19
Track/File/Disc/Folder Repeat Random Play Replaying the music, disc in the Disc changer or Play all the music on the disc or Audio file folder in Audio file folder you are listening to. random order. Press the [REP] button. Press the [RDM] button. Each time you press the button, the Repeat Play Each time you press the button, Random Play turns alternates between the modes shown in the tables ON or OFF. below. When the Random mode is ON, "DISC RDM"/"FOLD RDM"/"RDM ON" is displayed. In CD & Ext
Краткое содержание страницы № 20
CD/USB device/Audio file/External disc control features Function of Audio file Function of non-iPod and non-"Music Editor" file All Random Play File Select 1 mode Playing randomly from all of the Audio files Select the target folder by tracing the hierarchical recorded in the media. levels of folders. This is convenient when managing audio files by folder. Press the [A.RDM] button for at least 1 second. When the random mode is ON, "ALL RDM" is 1 Enter File Select 1 mode displayed. Press the
