Краткое содержание страницы № 1
ELECTRIC CHAINSAW
SHARPENER
Model 93213
SET uP ANd OPERATINg INSTRuCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAL.
© ®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may
Краткое содержание страницы № 2
NOTICE is used to SAVE THIS MANuAL address practices not Keep this manual for the safety warnings related to personal injury. and precautions, assembly, operating, CAuTION, without the inspection, maintenance and cleaning safety alert symbol, is procedures. Write the product’s serial number used to address practices not in the back of the manual near the assembly related to personal injury. diagram (or month and year of purchase if product has no number). Keep this manual and the
Краткое содержание страницы № 3
attachment to do the work of a larger for alignment and binding of moving industrial tool. There are certain parts; any broken parts or mounting applications for which this tool was fixtures; and any other condition that may designed. It will do the job better and affect proper operation. Any part that is more safely at the rate for which it was damaged should be properly repaired intended. Do not modify this tool and do or replaced by a qualified technician. Do not use this tool for a
Краткое содержание страницы № 4
processes) can result in eye, skin replacements are available at Harbor and breathing irritation. Always Freight Tools. use a NIOSH (National Institute for 3. Do not overtighten the Grinder Lock Cap Occupational Safety and Health) (9). Hand tighten it only. Overtightening approved respirator and safety goggles. may cause the wheel to break or Avoid skin exposure. disintegrate. 24. People with pacemakers should 4. Never use the Chainsaw Sharpener consult their physician(s) before use
Краткое содержание страницы № 5
2. The grounding prong in the plug is gROuNdINg connected through the green wire inside TO PREVENT the cord to the grounding system in the ELECTRIC SHOCK tool. The green wire in the cord must ANd dEATH FROM INCORRECT be the only wire connected to the tool’s gROuNdINg WIRE grounding system and must never be CONNECTION: attached to an electrically “live” terminal. Check with a qualified electrician (See 3-Prong Plug and Outlet.) if you are in doubt as to whether 3. The tool must be plu
Краткое содержание страницы № 6
Extension Cords RECOMMENdEd MINIMuM WIRE gAugE FOR EXTENSION CORdS* (120/240 VOLT) 1. Grounded tools require a three wire EXTENSION CORd extension cord. Double Insulated NAMEPLATE LENgTH tools can use either a two or three wire AMPERES extension cord. (at full load) 2. As the distance from the supply outlet 0 – 2.0 18 18 18 18 16 increases, you must use a heavier gauge 2.1 – 3.4 18 18 18 16 14 extension cord. Using extension cords 3.5 – 5.0 18 18 16 14 12 with inadequately sized wire c
Краткое содержание страницы № 7
SPECIFICATIONS Motor 120 V~, 0.75 A (Load), Direct Drive RPM 4200 Vise Capacity 0.80” to 0.50” Table / Vise Angles 35° Right to Left Arbor Diameter 7/8” Wheel Dimensions 4-1/4” Dia. x 1/8” Thick Working time S3:10S ON / 15S OFF Note: Performance of this tool (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance. uNPACKINg When unpacking, make sure that the item is intact and undamaged. If any parts are
Краткое содержание страницы № 8
ASSEMBLY WARNINg! Unplug the tool before changing grinding wheels, or before making any adjustments to the tool. FIguRE 2 Installation 1. Install the Sharpener to a workbench before use. FIguRE 1 Base (17) 2. Bolt (bolts not included) the unit directly to the workbench through the two 1/4” holes on the Base (17). The workbench must have a solid surface capable of supporting the weight of this product, the workpiece and assorted tools. See FIguRE 2 . 1/4” Hole Lock Wheel (18) with Bol
Краткое содержание страницы № 9
to the human eye by hanging it up by Mounting a grinding Wheel the central hole and tapping it with a non Refer to the Assembly Drawing on page 10. metal object (ie: screwdriver handle). If it is in good condition it will produce a FIguRE 3 grinding Wheel metallic sound. A dull sound indicates a Cover (11B) crack or break. 5. Replace the Grinder Lock Cap (9). 6. Replace the Grinding Wheel Cover (11B). Top Housing (4B) 7. Release the Lock Stop (6) and lower the Lock Stop (6) Top Housi
Краткое содержание страницы № 10
FIguRE 5 OPERATION Tip of Chain Stop positioned against tooth. WARNINg! Unplug the unit before adjusting chain to be sharpened. Refer to the Assembly Drawing on page 10 and the various photographs. Chain Stop (23) Note: Raise the Top Housing (4B) while adjusting the chain. 1. Clean the chain before sharpening. Wash it with a nonflammable solvent. Do not use gasoline. Dry the chain. Lock FIguRE 6 Nut Lower Knob (26) Angle gauge 3. Lower the Chain Stop (23) so that it is positioned on th
Краткое содержание страницы № 11
move to the next link, and tighten it to FIguRE 7 sharpen each link. FIguRE 9 Lock Stop (6) 6. Hold it at that position while you tighten the Lock Stop (6) so that the wheel will 9. If the chain has been repeatedly only go down to that point. See FIguRE sharpened, the chain depth limiting 7. gauges may need to be taken down with a flat file (not included). See FIguRES 7. Depending on the amount of material 8 & 9. File down each gauge so that you wish to remove, tighten or loosen the
Краткое содержание страницы № 12
FIguRE 11 FIguRE 10 Lock 3. Slowly lower the grinding wheel as Wheel shown in FIguRE 10 . If you notice slight (18) errors in your settings, turn off the unit 5. After you finished sharpening all of the and unplug it before you make your teeth set for your current angle, turn off adjustments. the machine by pushing the Switch (5B) Note: A good grind occurs when the contact and unplugging the unit. See FIguRE between the wheel and the teeth are 11 gradual and smooth. Do not stop too
Краткое содержание страницы № 13
MAINTENANCE 1. Keep the Sharpener clean and free of dust, metal debris and dirt. 2. Check the Grinding Wheel before each use to make sure it isn’t damaged. Do not use a grinding wheel if it is chipped, cracked, or worn. You can check if the wheel has cracks not visible to the human eye by hanging it up by the central hole and tapping it with a non metal object (ie: screwdriver handle). If it is in good condition it will produce a metallic sound. A dull sound indicates a crack or b
Краткое содержание страницы № 14
PARTS LIST Part description Q’ty Part description Q’ty 1 Screw 3 20* Washer 1 2 Motor Cover 1 21* Bearing 1 3 Power Cord 1 22* Swing Arm 1 4B Top Housing 1 23* Chain Stop 1 5B Rocker Switch 1 24* Tension Spring 1 6 Lock Stop 1 25* Retaining Ring (5) 1 7 Grinding Wheel Base 1 26* Lower Knob 1 8 Grinding Wheel 1 27* Screw 1 9 Grinder Lock Cap 1 28* Bolt 1 10 Screw 2 29* Chain Saw Frame 1 11B Grinding Wheel Cover 1 30* Square Neck Screw 1 12 O-ring 2 31* Sliding Guide 2 13 Punching Axis 1 32* Pad 2
Краткое содержание страницы № 15
ASSEMBLY dRAWINg SKU 93213 For technical questions, please call 1-800-444-3353. Page 15 Chain Mounting Assembly Set 39
Краткое содержание страницы № 16
LIMITEd 90 dAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installatio
