Краткое содержание страницы № 1
CD RECEIVER KD-AR200/KD-G200
RECEPTOR CON CD KD-AR200/KD-G200
RECEPTEUR CD KD-AR200/KD-G200
S
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Esta unidad está equipada con demostración en la pantalla. Para cancelarla, consulte la página 8.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-
vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refié
Краткое содержание страницы № 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Краткое содержание страницы № 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS ................... 17 How to use the MODE button ................... 3 Selecting preset sound modes (C-EQ: custom equalizer) ....................... 17 LOCATION OF THE BUTTONS ............ 4 Adjusting the sound ..........
Краткое содержание страницы № 4
LOCATION OF THE BUTTONS Control panel Display window 1 (standby/on attenuator) button a∞ (down) button 2 SEL (select) button 1 (reverse) button 3 FM/AM button 4 CD button Display window 5 Loading slot s Tuner reception indicators—MO (monaural), 6 Display window ST (stereo) 70 (eject) button d CD indicator 8 Remote sensor f RND (random disc) indicator • Only for KD-AR200. g RPT (repeat) indicator 9 EQ (equalizer) button h LOUD (loudness) indicator p5 (up) button j EQ (equalizer) indicator ¡ (fas
Краткое содержание страницы № 5
3 Selects the preset stations while listening to Remote controller the radio. This section is only for KD-AR200. Each time you press the button, the preset station number increases, and the selected station is tuned in. RM-RK60 4 Selects the sound mode (C-EQ: custom equalizer). Each time you press the button, the sound mode (C-EQ) changes. 5 Selects the band while listening to the radio. Each time you press the button, the band changes. 6 Selects the source. S Each time you press the button, the
Краткое содержание страницы № 6
3. Return the battery holder. Preparing the remote Insert again the battery holder by pushing it controller until you hear a clicking sound. This section is only for KD-AR200. (back side) Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Remote sensor WARNING: • Store the battery in a place which children cannot reach. If a child accidentally swallows the battery, immediately consult a doctor
Краткое содержание страницы № 7
BASIC OPERATIONS 1 3 2 Turning on the power 4 Adjust the sound as you want. (See pages 17 and 18.) 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. to press this button to turn on
Краткое содержание страницы № 8
Canceling the display 3 Select “DEMO OFF.” demonstration When shipped from the factory, display demonstration has been activated, and starts DEMO OFF DEMO ON automatically when no operations are done for about 20 seconds. • It is recommended to cancel the display demonstration before you use the unit for the first time. To cancel the display demonstration, follow the procedure below: 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds. “DEMO,” “CLOCK H,” “CLOCK M,” “DIMME
Краткое содержание страницы № 9
Setting the clock 4 Finish the setting. 1 Press and hold SEL (select) for more than 2 seconds. “DEMO,” “CLOCK H,” “CLOCK M,” “DIMMER,” or “AMP GAIN” appears on the display. To check the current clock time or change the display mode Press DISP (display) repeatedly. Each time you press the button, the 2 Set the hour. display changes as follows: 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour. • During tuner operation: 12 Frequency Clock • During CD operation: Elapsed playi
Краткое содержание страницы № 10
RADIO OPERATIONS Listening to the radio 2 Start searching for a station. To search for stations of You can use either automatic searching or manual higher frequencies searching to tune in to a particular station. Searching for a station automatically: To search for stations of lower frequencies Auto search When a station is received, searching stops. 1 Select the band (FM1 – 3, AM). To stop searching before a station is Each time you press the received, press the same button you have button, the
Краткое содержание страницы № 11
Searching for a station manually: When an FM stereo broadcast is hard to Manual search receive 1 Press MODE to enter the functions mode while listening 1 Select the band (FM1 – 3, AM). to an FM stereo broadcast. Each time you press the button, the band changes as 2 Press MO (monaural), while follows: “MODE” is still flashing on the display, so that “MONO” FM1 FM2 FM3 AM appears on the display. Each time you press the button, Note: monaural mode turns on and off This receiver has three FM bands (
Краткое содержание страницы № 12
Manual preset Storing stations in memory You can preset up to 6 stations in each band You can use one of the following two methods to (FM1, FM2, FM3, and AM) manually. store broadcasting stations in memory. Ex.: Storing FM station of 92.5 MHz into the • Automatic preset of FM stations: SSM (Strong- preset number 1 of the FM1 band. station Sequential Memory) • Manual preset of both FM and AM stations 1 Select the band (FM1 – 3, AM) you want to store stations into (in this FM station automatic pre
Краткое содержание страницы № 13
Tuning in to a preset station 4 Repeat the above procedure to store other stations into other preset You can easily tune in to a preset station. numbers. Remember that you must store stations first. If you have not stored them yet, see “Storing Notes: stations in memory” on pages 12 and 13. • A previously preset station is erased when a new station is stored in the same preset number. 1 Select the band (FM1 – 3, AM). • Preset stations are erased when the power supply to the memory circuit is int
Краткое содержание страницы № 14
CD OPERATIONS Note: Playing a CD When a CD is inserted upside down, “EJECT” appears on the display and the CD automatically Insert a CD into the loading slot. ejects. The unit turns on, draws the CD and starts playback automatically. To stop play and eject the CD Press 0. CD play stops and the CD automatically ejects Note on One-Touch Operation: from the loading slot. The source changes to the When a CD is already in the loading slot, pressing tuner (you will hear the last received station.) CD
Краткое содержание страницы № 15
Locating a track or a Selecting CD playback modes particular portion on a CD To play back tracks at random (Disc Random Play) To fast-forward or reverse the track You can play back all tracks on the CD at random. Press and hold ¡, while 1 Press MODE to enter the playing a CD, to fast-forward the functions mode while playing a track. CD. 2 Press RND (random), while Press and hold 1, while playing a CD, to “MODE” is still flashing on the reverse the track. display, so that “DISC RND” appears on th
Краткое содержание страницы № 16
To play back tracks repeatedly Prohibiting CD ejection (Track Repeat Play) You can prohibit CD ejection and can lock a CD You can play back the current track repeatedly. in the loading slot. 1 Press MODE to enter the functions mode while playing a While pressing CD, press and hold 0 for CD. more than 2 seconds. 2 Press RPT (repeat), while “MODE” is still flashing on the display, so that “TRK RPT” appears on the display. Each time you press the button, “NO EJECT” flashes on the display for about
Краткое содержание страницы № 17
SOUND ADJUSTMENTS Selecting preset sound modes Indication For: Preset values BAS TRE LOUD (C-EQ: custom equalizer) USER (Flat sound) 00 00 OFF You can select a preset sound mode (C-EQ: ROCK Rock or +03 +01 ON custom equalizer) suitable to the music genre. disco music CLASSIC Classical +01 –02 OFF Select the sound mode you want. music Each time you press the POPS Light music +04 +01 OFF button, the sound modes change as follows: HIP HOP Funk or rap +02 00 ON music JAZZ Jazz music +02 +03 OFF USER
Краткое содержание страницы № 18
1 * When you adjust the bass, treble, or loudness, the Adjusting the sound adjustment you have made is stored for the currently selected sound mode (C-EQ) including You can adjust the sound characteristics to your “USER.” preference. 2 * If you are using a two-speaker system, set the fader level to “00.” 1 Select the item you want to adjust. 3 * Normally the control dial works as the volume Each time you press the control. So you do not have to select “VOL” to button, the adjustable items adjust
Краткое содержание страницы № 19
OTHER MAIN FUNCTIONS Selecting the dimmer mode Selecting the amplifier gain control You can dim the display at night (according to your preference). You can change the maximum volume level of When shipped from the factory, dimmer is this unit. When the maximum power of the deactivated. speakers is less than 50 W, select “LOW PWR” to prevent them from being damaged. 1 Press and hold SEL (select) for more When shipped from the factory, “HIGH PWR” is than 2 seconds. selected. “DEMO,” “CLOCK H,” “CL
Краткое содержание страницы № 20
Attaching the control panel Detaching the control panel 1 Insert the left side of the control You can detach the control panel when leaving panel into the groove on the panel the car. When detaching or attaching the control panel, holder. be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 2 Press the right side of the control 1 Unlock the control panel. pa
