Краткое содержание страницы № 1
RCD904
Краткое содержание страницы № 2
12 English English RCD904 RCD904 MINI HIFI SYSTEM WITH TURNTABLE, 3-CD CHANGER, AM/FM-STEREO RADIO, 20 22 18 DOUBLE AUTOSTOP CASSETTE AND REMOTE CONTROL. 19 21 INSTRUCTION MANUAL Please read this instruction manual carefully and familiarize yourself with your new Hifi System before using it for the first time. Please retain this manual for future reference. 23 17 TABLE OF CONTENTS 24 25 • Location and Controls-------------------------------------------------------- 3 16 • Connecting to Power---
Краткое содержание страницы № 3
34 English English LOCATION OF CONTROLS 36. STOP / EJECT Key 37. PAUSE Key 1. Mains Lead , Speaker Sockets and FM Antenna wire ( at the rear of the unit ) 38. CD OPEN / CLOSE Button 2. CD Tray 39. CD DIRECT Access - 1, 2, 3 3. RECORD Key 4. PLAY Key 5. REWIND Key CONNECTING TO POWER 6. FAST FORWARD Key Before switching on make sure that the voltage of your electricity supply is the same as 7. STOP / EJECT Key that indicated on the rating plate. 8. PAUSE Key 9. CASSETTE Compartment A For your own
Краткое содержание страницы № 4
56 English English AM/FM TUNER • Press the Stop / Eject Key (36) when finished. Otherwise the tape will stop automatically when the end of the tape is reached. OPERATION • Press the STANDBY/ON Button (16) to ON . The Standby indicator (19) will go off. CONTINUOUS PLAYBACK ( ONLY RUNNING FROM TAPE DECK B TO A ) • Set the Function Selector (14) to the TUNER position. • Set the Function Selector (14) to the TAPE position. • Select the desired frequency band with the Band Selector (28). • Insert yo
Краткое содержание страницы № 5
78 English English SYNCHRONIZED TAPE-TO-TAPE RECORDING • To remove a disc from its storage case, press down on the centre of the case and lift the NORMAL SPEED TAPE-TO-TAPE RECORDING disc out, holding it carefully by the edges. • Insert a fully rewound prerecorded cassette into Tape Deck B. • Insert a fully rewound blank cassette tape into Tape Deck A. • Set the Function Selector (14) to the TAPE position and keep the DUBBING Selector (26) in the “high” position. • Press the Pause Key of Tape De
Краткое содержание страницы № 6
910 English English your third disc. The discs must be centered in the pockets and loaded with the printed STARTING DISC PLAY FROM THE BEGINNING OF A PARTICULAR TRACK sides facing up. If the disc is not properly centered in the pocket, it may move when you • Press the Forward or Reverse Skip Track buttons UP/DOWN (30) to select the close the drawer. This could jam the mechanism or possibly damage the disc, so be desired track. The number of the selected track will be shown on the CD display. P
Краткое содержание страницы № 7
11 12 English English 02d2:00 Select the track you wish to programm by pressing SKIP FORWARD button until the REPEAT PLAY MODES desired track appears in the display. • Repeat the above steps until you have entered up to 32 tracks into the memory. Choose the disc you want to repeat first. • When you are finished programming press the PLAY/PAUSE >II button (27) to begin There are 3 repeat options for your convenience. Pressing the REPEAT button (11) in STOP programmed playback. The PROGRAM
Краткое содержание страницы № 8
13 14 English English 7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing. make sure that there are no obstacles between the remote sensor and the remote 8. When the record is finished the turntable will automatically stop. control unit. 9. To stop the record whilst it is playing. Press the Stop Button, The the turntable will • If you press the MUTE button (7), the sound will be muted. Repress MUTE or the automatically will stop. VOLUME controls to return
Краткое содержание страницы № 9
English 15 16 English AC CONNECTION AC CONNECTION CASSETTE CARE Plug the power cord into an AC outlet having 120V ,60Hz only. Connecting this unit to other power Two common causes of trouble experienced when using cassettes are:— sources may damage the unit. (a) Tape jamming — Leading to uneven speed in playback, and (b) Tape tangling — Where the tape wraps itself around vital parts of the mechanism. NOTES: To reduce the likelihood of these problems occurring, the following precautions should
Краткое содержание страницы № 10
WARNINGS TO Prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or add other outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. WARNING The lightning flash with arro- CAUTION : TO REDUCE THE The exclamation point within whead symbol,within an equ- RISK OF ELECTRIC SHOCK an equilateral triangle is int- ilateral triangle is intented to DO NOT REMO
