Краткое содержание страницы № 1
English
Français
Deutsch
Italiano
Español
Digital Automatic Blood Pressure Monitor
Nederlands
Model M3
Русский
Instruction Manual
IM-HEM-7200-E(V)-03-10/2010
5329530-9B
Check following components!
Vérifier les composants suivants ! Controleer de volgende onderdelen!
Manufacturer OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko, Kyoto,
Prüfen Sie folgende Teile des Lieferumfangs! Проверьте следующие компоненты!
617-0002 JAPAN
Controllare i componenti indicati di seguito!
¡Compruebe los
Краткое содержание страницы № 2
Contents G Thank you for purchasing the OMRON M3 Digital Automatic Blood Pressure Monitor. A 1 2 b The OMRON M3 is a compact, fully automatic blood pressure monitor, operating on the oscillometric principle. It measures your blood pressure and pulse rate simply and quickly. For F comfortable controlled inflation without the need of pressure pre-setting or re-inflation the J devices uses its advanced “IntelliSense” technology. B H Intended Use This product is designed to measure the blood pres
Краткое содержание страницы № 3
HEM-7200-E(V)_A_M_main.book 1 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 Important Safety Information Consult your doctor prior to using in pregnancy or if diagnosed with arrhythmia or arteriosclerosis. Please read this section carefully before using the unit. Warning: • Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. (General Usage) • Always consult your doctor. Self-diagnosis of measurement results and self-treatment are dangerous. • People with
Краткое содержание страницы № 4
HEM-7200-E(V)_A_M_main.book 2 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 Important Safety Information (AC Adapter Usage) • Use only the original AC adapter (optional) designed for this unit. Use of unsupported adapters may damage and/or may be hazardous to the unit. • Plug the AC adapter into the appropriate voltage outlet. Do not use a multiple-tap. • Do not use the AC adapter if the unit or the power cord is damaged. Turn off the power and unplug the power cord immediately. (Battery Usage) • If battery
Краткое содержание страницы № 5
HEM-7200-E(V)_A_M_main.book 3 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 1. Overview Open the rear cover page to read following: The alphabet in the rear cover page correspond to those in the body page. Main unit Display A M Display Systolic blood pressure B N O/I START ( ) button Diastolic blood pressure C O Memory button Heartbeat symbol EN (Flashes during measurement) D Up/Down ( ) buttons P Memory symbol E Buzzer and Date/Time setting Q Deflation symbol ( ) button R Average value symbol F Air Jack S Mov
Краткое содержание страницы № 6
HEM-7200-E(V)_A_M_main.book 4 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 2. Preparation 2.1 Installing/Replacing the Batteries 1. Remove the battery cover. 2. Insert four “AA” batteries as indicated in the battery compartment and then replace the battery cover. Notes: • If the battery low symbol ( ) appears on the display, turn the unit off then replace all batteries at the same time. • The measurement values continue to be stored in memory even after the batteries are replaced. Disposal of used batterie
Краткое содержание страницы № 7
HEM-7200-E(V)_A_M_main.book 5 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 2. Preparation 2.2 Setting the Buzzer/ Date and Time 1. Press the button. 2. Set the Buzzer. Push or buttons to 1) select On or Off. EN 2) Push the button to confirm. On Off 3. Set the monitor to the correct date and time before taking a measurement for the first time. Push or buttons to 1) change. Push the button to confirm. 2) Year Month Day Next setting appears. Hour Minute 4. Press the O/I START button to store the setting
Краткое содержание страницы № 8
HEM-7200-E(V)_A_M_main.book 6 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 3. Using the Unit Open both the front and rear covers to read following: The alphabet and number in the cover page correspond to those in the body page. 3.1 Applying the Arm Cuff Remove tight-fitting clothing or tight rolled up sleeve from your upper arm. Do not place the cuff over thick clothes. L F 1. Insert the air plug into the air jack. 2. Put your arm through the cuff loop. 3. Position the arm correctly. a J The bottom edge of t
Краткое содержание страницы № 9
HEM-7200-E(V)_A_M_main.book 7 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 3. Using the Unit 3.2 How to Sit Correctly To take a measurement, you need to be relaxed and comfortably seated, under comfortable room temperature. No eating, smoking or exercising 30 minutes before taking a measurement. • Sit on a chair with your feet flat on the floor. c • Sit upright with your back straight. --- d • The cuff should be at the same level as your heart. --- EN Cuff wrapping guide The Cuff Wrapping Guide is a unique
Краткое содержание страницы № 10
HEM-7200-E(V)_A_M_main.book 8 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 3. Using the Unit 3.3 Taking a Reading Notes: • To cancel a measurement, press the O/I START button to turn off the unit and to release the air in the arm cuff. • Remain still while taking a measurement. 1. Press the O/I START button. The cuff will start to inflate automatically. The buzzer will sound when measurement is completed. If your systolic pressure is START INFLATE DEFLATE END COMPLETE more than 220 mmHg After the cuff starts
Краткое содержание страницы № 11
HEM-7200-E(V)_A_M_main.book 9 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 3. Using the Unit 2. Remove the arm cuff. 3. Press the O/I START button to turn off the monitor. The monitor automatically stores the measurement in its memory. It will automatically turn off after five minutes. Important: • Recent research suggests that the following values can be used as a guide to high blood pressure for measurements taken at home. EN Systolic Blood Pressure Above 135 mmHg Diastolic Blood Pressure Above 85 mmHg This
Краткое содержание страницы № 12
HEM-7200-E(V)_A_M_main.book 10 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 3. Using the Unit 3.4 Using the Memory Function The monitor automatically stores the result up to 60 sets. It can also calculate an average reading based on the measurements from the last three readings taken within 10 minutes. If there are only two readings in memory for that period, the average will be based on two readings. If there is one reading in memory for that period, the average will be based on one reading. Notes: • If t
Краткое содержание страницы № 13
HEM-7200-E(V)_A_M_main.book 11 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 3. Using the Unit To delete all the values stored in memory When the memory symbol ( ) appears, first press the Memory button. Then while holding it down, press the O/I START button simultaneously for about 2-3 seconds. EN Note: You cannot partially delete the stored readings. 11
Краткое содержание страницы № 14
HEM-7200-E(V)_A_M_main.book 12 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 4. Troubleshooting and Maintenance 4.1 The Icons and Error Messages Error Display Cause Remedy Remove the arm cuff. Wait 2-3 minutes and then take another measurement. Irregular or weak pulses are detected. Repeat the steps in section 3.3. If this error continues to appear, contact your doctor. Movement during measurement. Carefully read and repeat the steps in section 3.3. Cuff is not applied correctly. Apply the arm cuff correctl
Краткое содержание страницы № 15
HEM-7200-E(V)_A_M_main.book 13 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 4. Troubleshooting and Maintenance Error Display Cause Remedy Carefully read and repeat the steps listed under Cuff is under inflated. section 3.3. Repeat measurement. Remain still and do not talk during measurement. Movement during measurement. Refer to section 3.3. Insert the air plug securely. EN Air plug disconnected. Refer to section 3.1. Apply the arm cuff correctly. Arm cuff not applied correctly. Refer to section 3.1. Remove
Краткое содержание страницы № 16
HEM-7200-E(V)_A_M_main.book 14 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 4. Troubleshooting and Maintenance 4.2 Troubleshooting Problem Cause Remedy Apply the arm cuff correctly. Arm cuff not applied correctly. Refer to section 3.1. Remain still and do not talk during Movement or talking during measurement. The reading is extremely low (or measurement. high). Refer to section 3.3. Remove any clothing interfering Clothing is interfering with the arm with the arm cuff. cuff. Refer to section 3.2. Make s
Краткое содержание страницы № 17
HEM-7200-E(V)_A_M_main.book 15 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 4. Troubleshooting and Maintenance Problem Cause Remedy Replace the batteries with new ones. The batteries are empty. Refer to section 2.1. Nothing happens when you press the buttons. Insert the batteries with the correct The batteries have been inserted (+/-) polarity. incorrectly. Refer to section 2.1. • Press the O/I START button and repeat measurement. • If the problem continues, try replacing the batteries with new ones. EN Ot
Краткое содержание страницы № 18
HEM-7200-E(V)_A_M_main.book 16 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 4. Troubleshooting and Maintenance 4.3 Maintenance To protect your unit from damage, please observe the following: • Do not subject the main unit and the cuff to extreme temperatures, humidity, moisture or direct sunlight. • Do not fold the cuff or tubing tightly. • Do not inflate the arm cuff over 299 mmHg. • Do not disassemble the unit. • Do not subject the unit to strong shocks or vibrations (for example, dropping the unit on the fl
Краткое содержание страницы № 19
HEM-7200-E(V)_A_M_main.book 17 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 4. Troubleshooting and Maintenance 4.4 Storage Keep the unit in its storage case when not in use. 1. Unplug the air tube from the air connector. 2. Gently fold the air tube into the arm cuff. EN Note: Do not bend the air tube excessively. 3. Place the arm cuff and main unit in the storage case. Do not store the unit in the following situations: • If the unit is wet. • Locations exposed to extreme temperatures, humidity, direct sunlig
Краткое содержание страницы № 20
HEM-7200-E(V)_A_M_main.book 18 ページ ２０１２年２月１４日 火曜日 午後１２時１２分 5. Optional Parts Medium Arm Cuff Large Arm Cuff AC Adapter S Arm circumference 22 - 32 cm Arm circumference 32 - 42 cm CM2-9513256-6 (Model: HEM-CR24) CL2-9513255-8 (Model: HEM-CL24) Adapter S-9515336-9 CL1-9996760-3 CM1-9997578-9 Using the Optional AC Adapter 1. Insert the AC adapter plug into the AC adapter jack on the rear side of the main unit. 2. Plug the AC adapter into an electrical outlet. To disconnect the AC adapter, unpl
