Краткое содержание страницы № 1
Краткое содержание страницы № 2
7 Condensation — Moisture may form on the CD pickup lens WARNING when: TO REDUCE THE RISK OF FIRE OR ELECTRIC - The unit is moved from a cold spot to a warm spot SHOCK, DO NOT EXPOSE THIS APPLIANCE TO - The heating system has just been turned on - The unit is used in a very humid room RAIN OR MOISTURE. - The unit is cooled by an air conditioner When this unit has condensation inside, it may not function normally. Should this occur, leave the unit for a few hours, 1 then try to operate again. 0 8
Краткое содержание страницы № 3
TABLE OF CONTENTS w&aivwm4vf%%%shec+@w Congratulations on your purchase of an Aiwa Stereo System. To optimize the performance of this system, please take the time to read through these Operating Instructions and become familiar PREPARATIONS with the operating procedures. PRECAUTIONS ................................................................... 1 Check your system and accessories CONNECTIONS .................................................................. 3 BEFORE OPERATION ..............
Краткое содержание страницы № 4
2 Connect the supplied AM antenna to the AM CONNECTIONS LOOP terminal. Before connecting the AC cord The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage. Q IMPORTANT Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord in the end. 3 Connect the AC cord to an AC outlet. Do not,connect the FM antenna to the outdoor antenna terminal on the wall, as this could result in shock. When the AC co
Краткое содержание страницы № 5
BEFORE OPERATION SETTING THE CLOCK _ _-. r- POWER ~f= ~ @ CLOCK oi ,==+— -“”’!====4 SHIFT SHIFT mj [p —. -107– - -., l= FUNCTION \_____ —! k~A To turn the unit on Set the time as follows while the power is off. Press one (ofthe function buttons (TAPE, TUNER, VI DEO/AUX, CD)-The unit is turned on. 1 Press the II SET button. At this time, playback of the inserted disc begins, or the previously The hour flashes. tuned station is received (Direct Play Function). The POWER button is also available to
Краткое содержание страницы № 6
GRAPHIC EQUALIZER This unit provides the following three different equalization curves. ROCK: Powerful sound emphasizing treble and bass GEQ POP: More presence in the vocals and midrange JAZZ: Accented lower frequencies for jazz-type music, T-BASS Preee one of the GEQ buttons. SHIFT VOLUME To cancel the selected mode Press the selected button again. ‘(EQ oFF is displayed. VOLUME CONTROL To select with the remote control Press the GEQ button repeatedly while pressing the SHIFT Turn the VOLUME con
Краткое содержание страницы № 7
PRESETTING STATIONS MANUIAL TUNING The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly. MONO TUNER BAND SHIFT 1 Press the TUNER/BAND button repeatedly to select the desired band, FM or AM. If the power is turned off, the previously tuned station will be ~u played (Direct Play Function). 1 Press the TUNER/BAND button to select a band, To sele(ct a band with the remote
Краткое содержание страницы № 8
To play all discs in the disc compartment, press BASIC OPERATIONS the E button. Play begins with the disc on tray 1. Elapsed playing time Number of track being played To play one disc only, press one of the DISC DIRECT PLAY buttons. The selected disc is played once. To stop play, press the ■ button. To pause play, press the 1I button. To resume play, press again. To search for a particular point during playback, keep the LOADING DISCS 4< or ➤F button pressed and release the button at the desired
Краткое содержание страницы № 9
2 Press one of the DISC DIRECT PLAY buttons to RANDOM /REPEAT PLAY select a disc. Use the remote control. The selected disc is indicated in red on the display. RANDOM play Go to the next step when the tray stops rotating. Allthetracks on the selected disc or on allthe discs can be 3 Press the numeric buttons and the +10 button to played randomly. program a track. REPEAT play Example: A single disc or all the discs can be played repeatedly. To select the 25th track, press the +10, +10 and 5 butto
Краткое содержание страницы № 10
) BASIC OPERATIONS BASIC RECORDING := ~ ==’ (Deck 2) (Deck 1) Preparation Usable tapes ● Wind up the tape to the point recording starts. Use only normal (type I) tapes. ● Note that recording is done on only one side of the tape. 1 Press the TAPE button. ● Use only normal (type I) tapes. 2 Press the ■ l= button to open the cassette holder 1 Insert the tape to be recorded on into deck 1 and - and insert a tape exposed side down. push the cassette holder to close it. Push the cassette holder to clo
Краткое содержание страницы № 11
8 Press the EDIT/CHECK button on the remote Al EDIT RECORDING control while pressing the SHIFT button to prepare for the second recording. 9 Turn over the tape in deck 1 and press the o The Al edit function enables CD recording without worrying about button to start recording on the second side. tape length and track length. When a CD is inserted, the unit automatically calculates track lengths. If necessary, the order of tracks is rearranged so that no track is cut short. To stop recording in t
Краткое содержание страницы № 12
6 Repeat step 5 for the rest of the tracks for side PROGRAMMED EDIT A. A track whose playing time is longer than the remaining time RECORDING cannot be programmed. 7 Press the EDIT/CHECK button while pressing the SHIFT button to select side B and program the The Programmed edit function enables CD recording while tracks for side B. checking the remaining time on each side of the tape as the tracks are programmed. After confirming B on the display, repeat step 5. 8 Press the EDIT/CHECK button whi
Краткое содержание страницы № 13
SETTING THE SLEEIP TIMER About cassette tapes ● To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool. 1 2 Side A Tab for side A To record on the tape again, cover the tab openings with adhesive tape, etc. ● 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended. ● Take up any slack in the tape with a pencil or similar tool The unit can be turned off automatically at
Краткое содержание страницы № 14
SETTING THE TIMER The duration for the timer-activated period can be set between 5 and 240 minutes in 5-minute steps. 1 ● If this step is not completed within 4 seconds, repeat from step 1. 2,4 5 Prepare the source. To listen to a CD, load the disc to be played first on tray 1. 1,2 To listen to a tape, insert the tape into deck 1 or 2. To listen to the radio, tune in to a station. 6 6 Press the POWER button to turn the unit off after adjusting the volume and tone. O remains on the display after
Краткое содержание страницы № 15
m LISTENING TO EXTERNAL CONNECTING OPTIONAL EQUIPMENT SOURCES – CD DIGITAL OU1 (OPTICAL) POWER -1 ‘o - VIDEO/AUX @ m ,1.,,_ __ ,,, ,,._=_ ~ Refer to the operating instructions of the connected equipment for details. . The con netting cords are not supplied. Obtain the necessary To play equipment connected to the VIDEO/AUX jacks, proceed connecting cords. as follows. ● Consult your local Aiwa dealer for optional equipment. 1 Press the VIDEO/AUX button. VIDEO appears on the display. VIDEO/AUX JACK
Краткое содержание страницы № 16
SPECIFICATIONS CARE AND MAINTENANCE Main unit CX-NV2100 Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. FM tuner section Tuning range 87.5 MHz to 108 MHz To clean the cabinet Antenna Wire antenna Use a soft and dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly AM tuner section moistened with mild detergent solution. Do not use strong Tuning range 530 kHz tO 1710 kHz (10 kHz solvents, such as alcohol, benzine
Краткое содержание страницы № 17
PARTS INDEX TROUBLESHOOTING GUIDE Instructions about each ~art on the main unit or remote control If the unit fails to perform as described in these Operating are indicated on the pages listed below. Instructions, check the following guide. GENERAL There is no sound. ● Is the AC cord connected properly? ● Is there a bad connection? (+ page 3) ● There may be a short circuit in the speaker terminals. + Disconnect the AC cord, then correct the speaker connections. ● Was an Incorrect function button
Краткое содержание страницы № 18
6 Carros de mano y soportes — Cuando ~ ADVERTENCIA ponga o monte la unidad en un soporte o carro de mane, esta debera moverse con PARA REDUCIR EL RIESGO DE INCENDIOS O mucho cuidado. SACUDIDAS ELECTRICAS, NO EXPONGA ESTE ( Las paradas repentinas, la fuerza excesiva m A.- wm8Fsi- APARATO A LA LLUVIA NI A LA HUMEDAD. y Ias superficies irregulars pueden hater que la unidad o el carro de mano se d6 vuelta o se caiga. . e 7 Condensaci6n — En la Iente del fonocaptor del reproductor de discos compactos
Краткое содержание страницы № 19
INDICE &M?-e@A%%fa %i?@6fiti d 4&i?@z4 Enhorabuena por haber adquirido un sistema estereo Aiwa. Para optim izar Ias prestaciones de este sistema, tome el tiempo PREPARATWOS necesario para leer completamente este manual de instrucciones y familiarizarse con Ios procedimientos de utilization. PRECAUCIONES ............................................................... 1 CONEXIONES .................................................................... 3 Compruebe su sistema y Ios accesorios ANTES DE
Краткое содержание страницы № 20
2 Conecte la antena de AM suministrada al terminal CONEXIONES AM LOOP. Antes de conectar el cable de aiimentacion de CA La tension nominal de su unidad, mostrada en el panel trasero, es de 120 V CA. Asegurese de que la tension nominal coincida con la tension empleada en su Iocalidad. IMPORTANTE Conecte primero Ios altavoces, Ias antenas y todos Ios demas equipos opcionales. Luego conecte el cable de alimentacion de CA al final. 3 Conecte el cable de alimentacion de CA a una toma de CA. No conect
