Краткое содержание страницы № 1
2006/2007
ESCAPE HYBRID
OR MARINER HYBRID
EMERGENCY RESPONSE GUIDE
1
FCS-14265-05 2006/07 Escape Hybrid, Mariner Hybrid Emergency Response Guide, 08/2006
Краткое содержание страницы № 2
FOREWORD Escape Hybrid or Mariner Hybrid emergency response procedures are similar to those for a traditional gasoline powered vehicle with the exception of the high voltage electrical system. The Escape Hybrid or Mariner Hybrid vehicle uses a conventional gasoline engine in addition to an electric motor to power the vehicle. The energy used to power the vehicle comes from gasoline (used by the internal combustion engine) and electricity (used by the electric motor). The energy used to powe
Краткое содержание страницы № 3
ESCAPE HYBRID OR MARINER HYBRID VEHICLE IDENTIFICATION • A unique Hybrid label is located on the lift gate, the front driver's door, and the front passenger's door. This can be used to identify an Escape Hybrid or Mariner Hybrid vehicle. • The Escape Hybrid or Mariner Hybrid also has a unique left rear quarter glass that contains the high voltage battery air intake. Hybrid label on front doors Unique quarter glass with Hybrid label on lift gate high voltage battery air intake 3 FCS-14265
Краткое содержание страницы № 4
• Hybrid vehicles also have unique underhood appearance. The engine cover has a hybrid label for easy identification. Hybrid label on the engine cover th th th • The 5 , 6 , and 7 alphanumeric characters of the Vehicle Identification Number (VIN) identify hybrid vehicles. Hybrid Escapes have a U95 or U96 in th th th the 5 , 6 , and 7 position of the VIN. Hybrid Mariners will have U98 in the same positions. SAMPLE 1 F M Y U 9 6 H 3 5 K A 0 0 1 4 1 4WD Hybrid Escape 4 FCS-14265-05 200
Краткое содержание страницы № 5
DESIGN FEATURES The following list indicates some of the features that have been designed to disconnect high voltage in the event of an accident. • Inertia switches are designed to disconnect high voltage and fuel in the event of an accident. There are two inertia switches - both front and rear. If either switch opens, it disconnects the high voltage and electrical circuit to the gasoline fuel pump. • The high voltage system is disconnected any time the vehicle ignition key is turned to th
Краткое содержание страницы № 6
ESCAPE HYBRID OR MARINER HYBRID COMPONENTS IDENTIFICATION Please note the location of the following unique Hybrid components. Refer to the vehicle component location graphic on the following page. Component Location Description 1 Rear Inertia Switch Passenger side. Behind right The inertia switch disconnects high rear trim panel voltage and fuel in a collision -see page 8. 2 High Voltage Service The High Voltage Service Provides high voltage battery Disconnect Switch Disconnect Switch is lo
Краткое содержание страницы № 7
7 FCS-14265-05 2006/07 Escape Hybrid, Mariner Hybrid Emergency Response Guide, 08/2006
Краткое содержание страницы № 8
• Warning decals – like the ones shown here - will be located on components included in the high voltage system. High Voltage Component Warning Decal HIGH VOLTAGE BATTERIES • The High Voltage battery is located in the rear of the vehicle, underneath the carpet. High voltage Service Disconnect Switch Inertia Switch behind this panel 8 FCS-14265-05 2006/07 Escape Hybrid, Mariner Hybrid Emergency Response Guide, 08/2006
Краткое содержание страницы № 9
• Batteries consist of 250 individual cells (similar in shape to a size D flashlight battery). Each individual battery cell is contained in a stainless steel case. • Each individual cell is 1.3 volts. The cells are welded and wrapped together in groups of 5 to form a module. There are 50 modules in the battery pack. The total voltage of the battery pack is 300 volts DC • The batteries are Ni-MH (Nickel-Metal Hydride). The battery pack contains sealed batteries similar to the batteries used
Краткое содержание страницы № 10
• Bring the following equipment: o Class ABC powder type fire extinguisher o A non-conductive object – about 5 feet long (1.5 meters) – used to safely push someone away from the vehicle if they accidentally come in contact with high voltage. 2. APPROACHING A DAMAGED VEHICLE • Disable the high voltage electrical system using as many of the following steps as possible: o Secure the vehicle - Put the shift lever into Park. Remove the ignition key. Block the wheels if necessary. Removing the i
Краткое содержание страницы № 11
SPECIAL NOTES • If the vehicle is on fire, use Class ABC powder type extinguisher to contain and smother the flames. Or, if water is used, large amounts are required (e.g., from a fire hydrant). • If the vehicle has any exposed cables, make sure you are wearing insulated gloves and other protective clothing. Do not touch any broken or damaged orange cables. Treat severed lines as if they contain high voltage. • If the vehicle is submerged in water, do not touch any high voltage componen
