Краткое содержание страницы № 1
Amplifier Amplifier
Installation stallatio stallat
Guide
Mobile Wireless
Dual-Band
Cellular / PCS
Amplifi er
Contents:
Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · · 1
How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · · 3
Installing a Wilson Outside Antenna · · · · · · · · · · · · · · · 4
Installing a Wilson Amplifi er · · · · · · · · · · · · · · · · · · · · · · 5
I
Краткое содержание страницы № 2
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson’s 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1-Year Warranty Wilson Electronics amplifi ers are warranted for one (1) year against defects in workmanship and / or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof
Краткое содержание страницы № 3
Installation Instructions for the Following Wilson Amplifi er: Mobile Wireless Dual-Band Amplifi er Model # 271245, Part # 801201 FCC ID: PWO8012SM IC: 4726A-8012SM The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations were met. Inside this Package Wireless DC plug-in Low-profi le amplifi er power supply antenna How it Works Your new Wilson amplifi er has been carefully engineered to signifi cantly improve the performance of your cell phone
Краткое содержание страницы № 4
Before Getting Started This guide will help you properly install Wilson’s dual-band, mobile wireless amplifi er. It is important to read through all of the installation steps for your particular application prior to installing any equipment. Read through the instructions, visualize where all the equipment will need to be installed and do a soft installation before mounting any equipment. If you do not understand the instructions in full, seek professional help, or contact Wilson Technical Su
Краткое содержание страницы № 5
Installing a Wilson Outside Antenna To receive the best cell signal, select a location in the center of the vehicle’s roof 12 inches away from any other antennas and free of obstructions. Follow the specifi c antenna installation instructions included with the outside antenna (sold separately). ! Warning: Do not use any type of glass- mount antenna with this amplifi er. The outside and inside antennas must be shielded from each other to prevent oscillation. The outside antenna must be install
Краткое содержание страницы № 6
Installing a Wilson Amplifi er ! Warning: Do not plug in the DC power supply until the outside and inside antenna cables are attached to the amplifi er. Select a location to install the amplifi er that is away from excessive heat, direct sunlight or moisture and that has proper ventilation. Recommended installation locations are: • Under the seat • Under the dash Run the cable from the outside antenna and attach it to the FME-Male connector labeled “outside antenna” on the amplifi er. Attach
Краткое содержание страницы № 7
Installing the Low-Profi le Antenna Install the low-profi le inside antenna 8-12 inches from where the cell phone or cellular Low-profi le data card will be used. Antenna Amplifi er ! Warning: Do not install the low-profi le antenna within four inches of metal. (Metal found inside the vehicle’s seat will not affect the antenna’s performance.) Place the inside antenna on the side of the driver’s seat for maximum performance. Install the inside antenna at least eight inches, but not more than 1
Краткое содержание страницы № 8
Powering up a Wilson Amplifi er Make sure both the outside and inside antenna cables are connected before powering up the amplifi er. Connect the power cable from the DC plug-in power supply to the amplifi er marked “Power” and insert the large end into DC power socket (the cigarette lighter outlet.) ! Warning: Use only the power Carefully insert the power cable. supply provided in this package. The power supply must be 6 V DC. The amplifi er may remain on all the time. However, leaving
Краткое содержание страницы № 9
Warnings and Recommendations Warning: In a wireless installation, do not plug the amplifi er directly into the cell phone or cellular data card using an antenna adapter. It will damage the cell phone or cellular data card. Warning: Do not plug in the DC power supply until the outside and inside antenna cables are attached to the amplifi er. Warning: RF Safety: The inside antenna must be installed with a separation of at least eight inches from all persons and must not be located in conju
Краткое содержание страницы № 10
Understanding the Amplifi er Lights The power light PWR will turn green when the amplifi er is successfully powered up. When the 800 MHz or 1900 MHz lights are lit green, the amplifi er is amplifying the outside signal. If one or both frequency lights turn red, oscillation is occurring and the amplifi er has powered down. The outside antenna needs to be moved farther from the inside antenna. Move the outside antenna on the roof of the car to the rear of the car, but at least 8-12 inch
Краткое содержание страницы № 11
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures amplifi ers, antennas and related components that signifi cantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building. With extensive experience in antenna and amplifi er research and design, the company’s engineering team uses a state-of-the-art testing labora
Краткое содержание страницы № 12
Amplifi er Specifi cations Dual Band 800/1900 MHz Specifi cations Model Number / Part Number 271245 / 801201 Connectors FME-Male Impedance (input/output) 50 ohms Dimensions 5.6 x 3.6 x 1.7 inch or 14.2 x 9.1 x 4.4 cm Weight 1.44 lbs or 0.65 kg Frequency 824-894 MHz / 1850-1990 MHz 1 Passband Gain (nominal) 800 MHz 50 dB 1900 MHz 60 dB 2 20 dB Bandwidth (nominal) 800 MHz (uplink/downlink) 53.5 MHz / 47.7 MHz 1900 MHz (uplink/downlink) 86 MHz / 83 MHz Power output for single cell phone (uplink) 800 M
