Краткое содержание страницы № 1
REQUIRED
MATERIALS:
A DIVISION OF RUSSELL CORPORATION
•2 People Portable System
Owners Manual
Customer Service Center
Wood Board
• N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A.
(scrap)
Sawhorse or
Support Table
Garden Hose or Sand
(2 each) Wrenches
and/or Socket
Wrenches and Sockets.
1/2" 9/16"
AND/OR
Write Model Number
WARNING!
From Box Here:
READ AND UNDERSTAND
1/2" 9/16"
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
OPTIONAL TOOLS
COUL
Краткое содержание страницы № 2
WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. DO NOT HANG on the rim or any part of the system including backboard, support braces or net. During play, especially when performing dunk type HEIGHT ADJUSTMENT activities, keep player's face away from the backboard, rim and net. Serious injury could occur if teeth/face come in Rest unit on suppor
Краткое содержание страницы № 3
SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this system without following the instructions carefully. Proper and complete assembly, use, and supervision are essential for proper operation and to reduce the risk of accident or injury. A high probability of serious
Краткое содержание страницы № 4
Get to know the basic parts of your basketball system... FRONT BACK TOP POLE BACKBOARD ELEVATOR RIM ASSEMBLY MIDDLE POLE STRUTS BOTTOM POLE BASE 4 ID# M580001 05/05
Краткое содержание страницы № 5
PARTS LIST Silver Item Qty. Part No. Description 1 1 20664903 Tank (Black) 2 1 918130 Top Pole Section 3 1 918133 Middle Pole Section with Label 4 1 918132 Bottom Pole Section 5 1 203099 Nut, Ny-Lock, 5/16-18 6 1 Net 7 1 20378701 Cap, Pole 8 3 203223 Bolt, Carriage, 5/16-18 x 1" Long 9 1 203617 Cap, Tank 10 1 203740 Bolt, Hex, 5/16-18 x 2.63" Long 11 2 201344 Knob, Plastic, 3-sided 12 1 Rim 13 1 Backboard 14 1 908134 Backboard Mounting Bracket 15 1 908129 Rim Bracket 16 2 203739 Bolt, Carriage 5
Краткое содержание страницы № 6
P PA AR RT TS S I ID DE EN NT TI IF FI IE ER R - Actual Size #8 (3) #17 (4) #5 (1) #16 (2) #19 (1) #20 (3) #18 (1) #10 (1) PARTS IDENTIFIER- Not Actual Size #1 (1) #21 (1) #22 (1) #6 (1) #11 (2) #9 (1) #15 (1) #7 (1) #12 (1) #14 (1) #13 (1) 6 ID# M580001 05/05
Краткое содержание страницы № 7
S SE EC CT TI IO ON N A A: : A AS SS SE EM MB BL LE E T TH HE E P PO OL LE ES S Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step. 1. Reference Stickers 2 3 4 TOP MIDDLE BOTTOM 05/05 ID# M580001 7
Краткое содержание страницы № 8
IMPORTANT! ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART Align poles using alignment marks. First, pound top and middle poles together by bouncing them on a scrap piece of alignment mark wood on the ground as shown in FIG A. until they no longer 2. move toward pole identification stickers. THEN add bottom pole section and pound together in the same way. TOP CAUTION! 2 THE IDENTIFICATION STICKER IS LOCATED 3-3/4" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE
Краткое содержание страницы № 9
Attach pole assembly to tank as shown. Secure pole assembly to tank by turning the pole assembly clockwise as shown. 3. NOTE: 4 CAREFULLY TIPPING THE SYSTEM FORWARD WILL ALLOW EASIER ACCESS TO UNDERSIDE OF BASE 18 19 WARNING! IMPORTANT!: TWO PEOPLE REQUIRED NOTE ORIENTATION FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. 05/05 ID# M580001 9
Краткое содержание страницы № 10
Secure tank struts (21 & 22) to pole. 4. WARNING! 5 17 10 17 21 22 TIGHTEN BOLT (10) IN LOCK NUT (5) UNTIL 1 FLUSH (EVEN) WITH LOCK NUT’S OUTER EDGE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Rotate struts down and bend struts outward to line up with holes on base as shown. Secure free ends of tank struts to tank with carriage bolt (8), and nut (20) as shown. 5. Repeat for other side. 8 8 17 17 20 20 10 ID# M580001 05/05
Краткое содержание страницы № 11
Pole bracket will need to be lightly pressed into backboard ribbing. Be sure to press completely into place. Attach rim to backboard and pole bracket (14) with nut (20), reinforcement bracket (15), and carriage bolt (8) as shown. Tighten nut completely. 6. NOTE: BOARD STYLE MAY VARY 13 20 12 15 PRESS BRACKET (14) INTO PLACE HERE 8 14 Carefully tip unit forward and slide backboard assembly onto pole as shown. SAWHORSE OR SUPPORT TABLE 05/05 ID# M580001 11
Краткое содержание страницы № 12
Attach board assembly to pole with carriage bolts (16) and knobs (11) as shown. Install pole 13 7. cap (7) as shown. 16 11 7 16 11 Place assembled unit in desired location. Fill tank completely with water (14 gallons/53 liters) or sand (approx. 170 lb./77 kg) and snap tank cap (9) in place. 8. 9 CAUTION! ADD ONE GALLON (3.78 LITERS) OF NON-TOXIC ANTIFREEZE IN SUB- FREEZING CLIMATES. NOTE: IF USING SAND: 2 GALLONS OF ANTI-FREEZE IS NOT REQUIRED 12 ID# M580001 05/05 SAND SAND (170 lb.) (170 lb
Краткое содержание страницы № 13
2. 1. Install net (6). 9. 4. 3. Attach height and moving label (23) to front of pole as shown. Regulation rim height is 10 feet. 10. WARNING! READ AND UNDERSTAND FAILURE TO FOLLOW OPERATING INSTRUCTIONS COULD RESULT IN INJURY OR DAMAGE TO PROPERTY. HEIGHT ADJUSTMENT Rest unit on support table. Remove adjustment knobs (A) and carriage bolts (B) to extend or retract backboard and rim. Height adjustment from 4-1/2' - 6-1/2'. A 23 WARNING Backboard may rotate during height adjustment. B WARNING
Краткое содержание страницы № 14
SAND 360 LBS. (163 KG) HEIGHT ADJUSTMENT Rest unit on support table. Remove adjustment knobs (A) and carriage bolts (B) to extend or retract backboard and rim. Height adjustment from 7 1/2' to 10'. CAUTION! A WARNING Backboard may rotate during height adjustment. B WARNING HEIGHT AND MOVING LABEL Do not adjust height of system in upright position. System must be in down position to adjust MOVING SYSTEM MUST NOT OBSTRUCT 1. While holding pole, rotate basketball system forward until wheels e
