Краткое содержание страницы № 1
USER MANUAL
MODEL:
DS Vision® Digital
HD Digital Distribution System
P/N: 2900-300283 Rev 1
Краткое содержание страницы № 2
Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 3 2.3 Recycling Kramer Products 3 3 Overview 4 3.1 Defining the DS Vision® Digital HD Digital Distribution System 4 4 Connecting the DS Vision® Digital 7 4.1 Connecting the Player and the Screen 7 5 Media Distribution 8 5.1 Mounting the Receiver 10 6 Serial Control 11 7 Terminal IP Connectivity 12 8 Scalability 13 8.1 Cascading to Increase the Distance 13 8.2 Cascading to
Краткое содержание страницы № 3
1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Our 1,000-plus different models now appear in 11 groups that are clearly defined by function: GROUP 1: Distribution Amplifi
Краткое содержание страницы № 4
2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment • Review the contents of this user manual • Ensure that the player and the screens are compatible. Check that they work together before connecting the DS Vision Digital system. Go to http://www.kramerelectronics.com to check for up-to-date user manuals, application programs, and to check if firmware i upgrades are available (wher
Краткое содержание страницы № 5
2.2 Safety Instructions Caution: There are no operator serviceable parts inside the unit ! Warning: Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning: Disconnect the power and unplug the unit from the wall before installing 2.3 Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected
Краткое содержание страницы № 6
3 Overview DS Vision® Digital is a high-definition (HD) digital distribution system that delivers real-time digital, non-compressed content to digital signage terminals up to 600m (2000ft) away. DS Vision® Digital enables you to manage digital signage assets and monitor system performance. The DS Vision® Digital system offers the following high-level capabilities: • Media distribution • Display serial control • Terminal IP connectivity • Scalability • Management features Continuo
Краткое содержание страницы № 7
3.1.1 The DS Vision® Digital Transmitter Figure 1: DS Vision® Digital Transmitter # Feature Function 1 12V DC POWER Connector Connects to the 12V DC power adapter 2 SERIAL 9-pin D-sub Connector Serial extension for terminal control 3 ETHERNET RJ-45 Connector IP extension and system management 4 DP Connector DP++ player connection 5 HDMI Connector HDMI player connection 6 SYSTEM RJ-45 Connector System cable to receiver 3.1.2 The DS Vision® Digital Broadcaster Figure 2: DS Visio
Краткое содержание страницы № 8
3.1.3 The DS Vision® Digital Receiver Figure 3: DS Vision® Digital Receiver # Feature Function 1 12V DC POWER Connector Connects to the 12V DC power adapter 2 MONITOR 3.5mm Mini Jack Connects to the performance monitoring engine 3 SYSTEM RJ-45 Connector System cable from transmitter 4 HDMI Connector HDMI display connection 5 ETHERNET RJ-45 Connector IP connectivity to display and/or peripherals 6 SERIAL 9-pin D-sub Connector Display control 6 DS Vision® Digital - Overview
Краткое содержание страницы № 9
4 Connecting the DS Vision® Digital Always switch off the power to each device before connecting it to your DS Vision® Digital. After connecting your DS Vision® Digital, i connect its power and then switch on the power to each device. 4.1 Connecting the Player and the Screen To connect the player to a screen, as Figure 4 illustrates, do the following: 1. Connect the player to the broadcaster/transmitter HDMI port using an HDMI to HDMI cable (type A, male/male) or connect a DP cable t
Краткое содержание страницы № 10
5 Media Distribution The DS Vision Digital system can distribute HD digital media from a single player to: • A single display located 100m (330ft) away, using the transmitter • Three displays located 100m (330ft) away, and one local display, using the broadcaster Figure 4 illustrates the configuration for media distribution to a single display: Figure 4: Media Distribution to a Single Display Figure 5 illustrates the configuration for media distribution to three displays: 8 DS Visi
Краткое содержание страницы № 11
Figure 5: Media Distribution to Three Displays Note! The connections to the transmitter and the broadcaster are identical. The broadcaster has three system ports and the transmitter i has only one system port. All references to connections apply equally to both units. Figure 6 and Figure 7 illustrate all the connections to the DS Vision Digital units. Not all the connections are always needed. This section explains the basic connections. Subsequent sections explain the circumstances
Краткое содержание страницы № 12
CAT5 e cable from Transmitter Ethernet cable to Receiver network System port 12 V DC MONITOR SYSTEM HDMI ETHERNET CONTROL To Media Feedback Monitoring Engine Serial cable to display Power connector control HDMI cable to display Figure 7: Receiver Connections 5.1 Mounting the Receiver The receiver units have VESA standard screw holes 100mm (3.9in) apart, as shown in Figure 8. Use two screws supplied with the receiver and monitor to connect the unit to the back of
Краткое содержание страницы № 13
6 Serial Control To enable serial control of remote displays: 1. Connect a serial (9-pin D-sub male/female) cable between the players and the broadcaster/transmitter. 2. Connect a serial (9-pin D-sub female/female) cable between the receiver and the screen. Figure 9 illustrates the connections: Figure 9: Serial Control When using a broadcaster, the serial command is broadcasted to all the displays. In order to send a quarry command to a specific display, make sure to place the rele
Краткое содержание страницы № 14
7 Terminal IP Connectivity To extend a network from the transmitter/broadcaster side to the remote terminal side: 1. Connect a standard Ethernet cable (Ethernet 10/100BaseT straight-through cable) between the player side network and the transmitter/broadcaster. 2. Connect a standard Ethernet cable (Ethernet 10/100BaseT straight-through cable) between the receiver and the terminal side units. Once these connections have been made, the extension system enables the creation of an extended
Краткое содержание страницы № 15
8 Scalability There are two types of methods to extend the system scale: • Cascade a receiver with a broadcaster/transmitter to increase the distance of the system • Cascade a broadcaster with a broadcaster/transmitter to increase the number of supported displays 8.1 Cascading to Increase the Distance Cascade up to six distribution systems to increase the distance up to 600m (2,000ft). Figure 11 illustrates a 2-hop cascaded system. Figure 11: 2-Hop Cascaded System To connect the re
Краткое содержание страницы № 16
Figure 12: 6-Hop Cascaded System 8.2 Cascading to Increase the Number of Displays Connect a primary broadcaster to a secondary broadcaster or transmitter to increase the number of receivers and displays that can be connected to the system. Cascading an additional broadcaster enables adding three displays, whereas cascading of an additional transmitter enables adding a single display. 1. Connect the primary broadcaster to a secondary unit using an HDMI to HDMI cable (type A, male/male)
Краткое содержание страницы № 17
Figure 13: Primary and Secondary Cascaded System Figure 14 illustrates a system with two cascaded broadcasters and a transmitter, providing four additional displays: DS Vision® Digital - Scalability 15
Краткое содержание страницы № 18
Figure 14: Cascaded Broadcaster and Transmitter The system can be further scaled to include hundreds of displays. Figure 15 illustrates the connection of 16 displays: 16 DS Vision® Digital - Scalability
Краткое содержание страницы № 19
Figure 15: Sixteen Displays When cascading to increase the distance, connect the receiver to the cascaded transmitter with the RS-232 serial cable. See Figure 11. DS Vision® Digital - Scalability 17
Краткое содержание страницы № 20
9 Advanced Management Features Use MDS management technology for advanced management features, such as: • Continuous playback (see Section 9.1) • Performance monitoring (see Section 9.2) Figure 16 illustrates the management architecture: Figure 16: Management Architecture To operate the management features, connect the transmitter/broadcaster to a DHCP server on the LAN. Once the transmitter/broadcaster is switched on, it receives an IP address from the DHCP server. 18 DS Visi
