Краткое содержание страницы № 1
ART-575W
Spectrum 575W
USER MANUAL
th
CHAUVET, 3000 N 29 Ct, Hollywood, FL 33020 U.S.A
(800) 762-1084 (954) 929-1115
FAX (954) 929-5560
www.chauvetlighting.com
2006-06-15/17:08
Краткое содержание страницы № 2
TABLE OF CONTENT TABLE OF CONTENT....................................................................................................................................................... 2 BEFORE YOU BEGIN....................................................................................................................................................... 3 WHAT IS INCLUDED ......................................................................................................................
Краткое содержание страницы № 3
BEFORE YOU BEGIN What is included ART-575W Spectrum 575W Power cord attached with bare ends (1) HSR575 HID lamp Warranty Card & Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mi
Краткое содержание страницы № 4
INTRODUCTION Technical Features 8-channel DMX-512 exterior color wash CMY color mixing system Vectored movement of all color blades for super smooth and slow transitions 11 instantly selectable preset color macros Variable mechanical dimmer (0 ~ 100%) Variable mechanical zoom (7°~40°) 32 built in color change programs at varying speeds Features Durable and weatherproof IP-54 rated housing Very low noise operation (convection cooled) <- look for a fan??
Краткое содержание страницы № 5
Introduction Product Overview 446 17.6in 410 16.1in Front View 289.2 11.38in Side View 528 20.8in 16.9in 13.5in 12.8in 428 344 326 100 100 396 3.9in 15.6in Bottom View Top View 126 Carrying handles Projection angle ART-575W User Manual 5 2006-06-15/17:08 11.4in 5.9in 289.2 150 445.7 17.5in 80 3.15in 254 10.0in
Краткое содержание страницы № 6
SETUP Lamp You will need to install a lamp prior to the initial operation of the fixture. Warning! When replacing the lamp, please wait 15 minutes after powering down to allow the unit to cool down! Always disconnect from main power prior to lamp replacement. Do not touch the envelope (glass area) of the bulb with bare hands. If this happens, clean the lamp with alcohol and wipe it with a lint free cloth before installation. LAMP INSTALLATION C D E A B Lamp plate Follow thisdir
Краткое содержание страницы № 7
To Ballast 230V/50Hz To Ballast 230V/60Hz Lamp Control to PCB in Setup LAMP ALIGNMENT HOW-TO Often, after a new installation of a lamp, you will find that there is an uneven field of light or what is referred to as a hot spot. This is due to the most intense point of the lamp source not being positioned optimally within the reflector. There are three lamp alignment screws provided at the base of the projector head, behind the back cover plate. Turning these screws allow you to optimiz
Краткое содержание страницы № 8
Setup Installation ORIENTATION This fixture is designed to achieve an Ingress Protection Rating of 54 only when the fixtures base is attached to a level horizontal surface. The ART-575W can be mounted both upright and on a truss system. Warning It is important never to obstruct the fan or vents pathway. When selecting installation location, take into consideration lamp replacement access and routine maintenance. Safety cables should always be used. The fixture must hav
Краткое содержание страницы № 9
Setup Power configuration The factory power settings will be printed on the fixtures serial label. Make sure that your local AC voltage matches that required by the fixture. 115V / 50Hz AC 230V / 60Hz AC The ART-575W is equipped with a 3-conductor electrical cable for connecting to an AC power supply. The cable enters the fixture through a cable gland that fits 5 to 10mm diameter cables. Because the ART-575W fixture is built for permanent exterior installations please adhere to the
Краткое содержание страницы № 10
OPERATING INSTRUCTIONS Operating Modes Stand-Alone mode will allow the independent execution of programs and a Master/Slave mode will allow the command of up to as many units you want in a synchronized manner. DMX control mode will provide the greatest flexibility and creativity. You can create an unlimited range of chase patterns at any speeds MASTER/SLAVE & STAND-ALONE Stand-alone is an independent fixture operating state which basically means without the use of any controllin
Краткое содержание страницы № 11
Operating Instructions ACCESSING INTERNAL PROGRAMS IN MASTER MODE The programs are available while the fixture is set to the Master mode which is dipswitch 11 to ON and 12 to OFF. The programs are assigned to the first 42 channels or numerical values which can be initialized using the dipswitches. Each dipswitch has an associated value. These values are not printed on the fixture so it is very important that you read this section thoroughly. Adding the value of each switch in the ON po
Краткое содержание страницы № 12
Operating Instructions BUILT-IN PROGRAMS CHART ON The channels address dipswitch settings for On and Off are displayed using binary numbers (1 and 0). 1 represents ON and 0 represent OFF. Remember 2 3 4 5 6 7 8 9 10 11 12 that dipswitch 11 is also turned ON for Master mode. 1 1 0 1 1 0 0 0 0 0 0 1 0 CHANNEL DIPSWITCH FUNCTION 1-2-3-4-5-6-7-8-9-10 0 0 0 0 0 0 0 0 0 0 0 Static Color: White 1 1 0 0 0 0 0 0 0 0 0 Static Color: Red 2 0 1 0 0 0 0 0 0 0 0
Краткое содержание страницы № 13
Operating Instructions DMX MODE Operating in a DMX Control mode environment gives ON the user the greatest flexibility when it comes to customizing or creating an environment. Simply address all fixtures sequentially and use any universal 1 2 3 4 5 6 7 8 9 10 11 12 DMX controller. DMX Mode: Set Dipswitches 11 & 12 to Off 1) Create the serial data link by connecting all fixtures in a daisy chain. 2) Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3
Краткое содержание страницы № 14
Operating Instructions ON CHANNEL 24 PIN # 5= 16 PIN # 4= 8 TOTAL= 24 2 3 4 5 6 7 8 9 10 11 12 1 1 4 1 6 6 4 2 5 6 Binary values 3 2 1 2 8 2 8 DIP SWITCH (DMX VALUE) 1 1 42 (32) = 10, Turn ON Dip # 6 2 2 10 (8) = 2, Turn ON Dip # 4 RESOLVING ADDRESS USING 3 4 2 (2) = 0, Turn ON Dip # 2 SIMPLE MATH. 4 8 5 16 ADDRESS 42 6 32 7 64 8 128 9 256 10 The ART-575W utilizes 8 control channels to operate in DMX mode. Therefore, each fixture must be spaced and
Краткое содержание страницы № 15
DMX Address Quick Reference Chart Dip Switch Position DMX DIP SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=OFF #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=ON #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X=OFF or ON #6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 #1 #2 #3 #4 #5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 1 0 0 0 0 1 33 65 97 129 161 193 225 257 289 321 353 385 417 449 481 0 1 0 0 0 2 34 66 98 130 162 194 226 258 290 322 354 386 418 450 482 1 1 0 0 0 3 35 67 99 131 1
Краткое содержание страницы № 16
Appendix APPENDIX DMX Primer There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX-512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates the first channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total number of channels required. Choosing a start address should be plann
Краткое содержание страницы № 17
Appendix DMX Channel Values CHANNEL VALUE FUNCTION Vector Control Speed for CMY and Dimmer 1 000 255 0 100% Yellow 2 000 255 0 100% Magenta 3 000 255 0 100% Cyan 4 000 255 0 100% Color Macros 5 Red, Yellow (soft orange edge), Green, Cyan, Light Blue, Blue, Dark Blue, Purple, 000 255 Magenta, White (soft pink edge) Linear Dimmer 6 000 255 0 100% Linear Zoom 7 000 255 7° 40° Programs 000 031 Blackout Rapid Color Change: Red, Y
Краткое содержание страницы № 18
Appendix Photo Metrics 40 Beampath 7200 2900 1250 620 500 400 320 LUX 6 5 4 3 2 1 0 1 2 3 4 5 6 3 5 10 15 20 25 30 Distance(m) 2.18 3.64 7.28 10.92 14.56 18.20 21.84 Diameter(m) 7 Beampath 23000 8200 2300 1200 800 620 560 LUX 2 1 0 1 2 3 5 10 15 20 25 30 Distance(m) 0.37 0.61 1.22 1.83 2.45 3.06 3.67 Diameter(m) ART-575W User Manual 18 2006-06-15/17:08 7 40
Краткое содержание страницы № 19
Appendix Dipswitch Location Remove fixture front cover, clips are located on both sides. Front of fixture exposed Dipswitch is accessible without removing PCB cover; however, a photograph has been taken with the PCB cover removed. Dipswitches ART-575W User Manual 19 2006-06-15/17:08
Краткое содержание страницы № 20
Appendix Maintenance To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month. Dust build up reduces light output performance and can cause overheating. This can lead to reduced lamp life and increased mechanical wear. Be sure to power off fixture before conducting maintenance. Unplug fixture from power. Use a va
