Краткое содержание страницы № 1
WS-9075U
Wireless 433 MHz
Radio-controlled Weather Station
Instruction Manual
Краткое содержание страницы № 2
TABLE OF CONTENTS Page Topic Inventory of Contents/Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default Settings 6 Function Keys 6 Setting the LCD Contrast 6 Setting the Time Zone 7 Daylight Saving Time Setting 7 Radio-controlled Time Setting On/Off 8 12/24-hour Time Setting 8 Setting the Time 8-9 Setting the Year, Day and Month 9 Setting the Temperature Unit
Краткое содержание страницы № 3
INVENTORY OF CONTENTS 1. The WS-9075U weather station (Figure 1) 2. One TX6U remote temperature sensor (Figure 2) 3. Mounting hardware 4. Instruction manual and warranty card. Figure 1 Time and Date LCD Figure 2 Forecast LCD Outdoor LCD Indoor LCD Moon Phase LCD *LCD (Liquid Crystal Display) ADDITIONAL EQUIPMENT (not included) 1. Three fresh AA 1.5V batteries for the indoor weather station. 2. Two fresh AA 1.5V batteries for the re
Краткое содержание страницы № 4
QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 feet apart. 2. Batteries should be out of both the indoor weather station and remote temperature sensor units for 10 minutes. 3. Place the batteries into the remote temperature sensor first then into the indoor weather station. 4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES. In this time the indoor weather station and remote
Краткое содержание страницы № 5
DETAILED SET-UP GUIDE BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the mounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not spring free). 4. Replace the battery cover by sliding upwards. Be sure battery cover is on securely. B. INDOOR WEATHER STATION 1. Remove the bat
Краткое содержание страницы № 6
PROGRAM MODE Programming Note: If 15 seconds are allowed to pass, or the CHANNEL button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections IV through XI, you can advance to step 4 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructi
Краткое содержание страницы № 7
III. TIME ZONE SETTING 1. The time zone will flash in the DATE LCD. 2. Press and release the MIN/MAX/+ or ALARM/- button to select your time zone. Note: It is possible to select any time zone from –12 GMT to +12 GMT (for example to see the time in another country). TIME ZONES GMT 0 Atlantic -4 EST; Eastern -5 CST; Central -6 MST; Mountain -7 PST; Pacific -8 ALA; Alaska -9 HAW Hawaii -10 ; 3. Press and release the SET button to confirm and advance to the Daylight S
Краткое содержание страницы № 8
V. RADIO-CONTROLLED TIME ON/OFF SETTING 1. “RCC” will appear in the DATE LCD and “ON” or “OFF” will flash in the TIME LCD. 2. Press and release the MIN/MAX/+ or the ALARM/- key to select radio-controlled time on or off. 3. Press and release the SET button to confirm and advance to the 12/24-hour time setting. VI. 12 OR 24 HOUR TIME SETTING 1. “12h” or “24h” will flash in the TIME LCD. 2. Press and release the MIN/MAX/+ or the ALARM/- button to select 12 or 24-hour time format.
Краткое содержание страницы № 9
3. Press and release the SET button to confirm the hours setting and advance to the minutes setting. 4. The minutes digits will flash in the TIME LCD. 5. Press and release the MIN/MAX/+ button to advance or the ALARM/- key to decrease the minutes. 6. Press and release the SET button to confirm and advance to the year setting. VIII. SETTING THE YEAR, DAY AND MONTH Note: Reception of the WWVB signal will also set the date and day. The reception of the signal will override any programmed
Краткое содержание страницы № 10
XI. SETTING THE ANIMATION (FORECAST ICONS AND STARS) 1. “ON” or “OFF” will flash in the TIME LCD. If “ON” the forecast icon and tendency arrows will flash in the FORECAST LCD and the stars will flash in the MOON PHASE LCD. If “OFF”, the forecast icon, tendency arrows, and stars will not flash. 2. Press and release the MIN/MAX/+ or the ALARM/- button to select the animation on or off. 3. Press and release the SET button to confirm the animation setting and complete the programmi
Краткое содержание страницы № 11
I. WEATHER FORECAST The weather forecasting feature is estimated to be 75% accurate and is for the next 12 to 24 hours. The weather forecast is based solely upon the change of air pressure over time. The WS-9075U averages past air-pressure readings to provide an accurate forecast—creating a necessity to disregard all weather forecasting for 12-24 hours after the unit has been set-up, reset, or moved from one altitude to another (i.e. from one floor of a building to another floor). In areas
Краткое содержание страницы № 12
IV. MINIMUM AND MAXIMUM TEMPERATURE AND HUMIDITY RECORDS The WS-9075U keeps a record of the MINIMUM and MAXIMUM and date of their occurrence, for both the indoor and outdoor modes. A. VIEWING THE OUTDOOR TEMPERATURE RECORDS 1. Press and release the MIN/MAX/+ button once. “min” temperature appears with the outdoor temperature, indicating that the minimum temperature and the time and date of occurrence are displayed. The minimum record will display for 30 seconds before returning to the
Краткое содержание страницы № 13
V. OUTDOOR CHANNEL RE-LEARN MODE In case the temperature data in a particular outdoor channel often shows “--.-“ due to low battery level or false reset of a transmitter, that transmitter can be set up again individually and the “lost” channel can be re-learned again by entering the channel re-learn mode. To do this, after the individual temperature sensor is set: 1. Press and hold the CHANNEL key for 6 seconds until the channel identification number flashes. 2. Press and release the MI
Краткое содержание страницы № 14
VII. ADDING REMOTE TEMPERATURE SENSORS (OPTIONAL) The WS-9075U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions—follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of remote temperature sensor units with the WS-9075U. These extra sensors can be purchased through the same dealer as this unit, or by con
Краткое содержание страницы № 15
MOUNTING Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Also, extreme and sudden changes in temperature will decrease the accuracy of the indoor weather station, and changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before obtaining reliable data. To achieve a true temperature reading, avoid mounting where direc
Краткое содержание страницы № 16
B. FOLDOUT TABLE STAND: The foldout table stand leg is located on the backside. 1) Pull the stand out from the bottom center edge of the weather station, below the battery compartment. 2) Once the foldout table stand is extended, place the weather station in an appropriate location. TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology. Problem: No reception of WWVB time signal. Solution: 1) Wait overnight for signal. 2) Be sure indoor weather stat
Краткое содержание страницы № 17
MAINTENANCE AND CARE INSTRUCTIONS • Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • Do not submerge in water. • Immediately remove all low powered batteries to avoid leakage and damage. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs. SPE
Краткое содержание страницы № 18
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5
