Краткое содержание страницы № 1
OWNER'S
MANUAL
MODEL NO.
625.384600
Caution:
Read and Follow
All Safety Rules,
UNDERSINK DRINKING
Installation and
Operating
WATER FILTER
Instructions
Before First Use
SYSTEM
of This Product.
• Safety Guides
• Installation
If you have questions
when installing and us- • Operation
ing your drinking water
• Cartridge Replacement
filter system, call this
toll-free number...
• Repair Parts
1 - 800 -426 - 9345
!
System tested and certified by NSF International to | /'Lm_r'_
ANSI/NSF Standard 42 and 5
Краткое содержание страницы № 2
SAFETY GUIDES / SPECIFICATIONS Massachusetts shall be adhered to. Consult with • Read all steps and guides carefully before instal- your licensed plumber. ling and using your undersink drinking water filter system. Follow all steps exactly to correctly install. • The undersink drinking water filter system Reading this manual will also help you to get all the works on water pressures of 40 psi (minimum) to 100 benefits from the undersink drinking water filter psi (maximum). If your house water pr
Краткое содержание страницы № 3
TABLE OF CONTENTS Parts of the System / Typical Installation Drawing / Tools and Materials Needed ................................................ 4 Drinking Water Filter System Installation ........................... 5 - 7 Installing Supply Fitting ..................................... 5 Installing Faucet ............................................ 5- 6 Installing Filter Cartridge .................................... 7 Using the Filtered Water System ................................... 8 Filt
Краткое содержание страницы № 4
PARTS OF THE SYSTEM MATERIALS AND TOOLS NEEDED • plumbers putty filter system assembly including mounting brack- • slotted and Phillips screwdrivers et and screws • pliers and adjustable jaw wrench • tubing cutter water supply fitting • sandpaper or emery cloth _" filtered water faucet for sink or countertop mount- • electric driU and 3 / 4" d_l bit if mounting hole is ing needed for the faucet, see page 6 3/8" tubing to make all needed connections CAUTION: To avoid damaging the sink, consult a
Краткое содержание страницы № 5
INSTALLATION STEPS STEP 1 - COLD WATER SUPPLY FITTING Check and comply with local plumbing codes as you plan, then install a cold feed (supply) water fitting. The fitting must provide a leak- tight connection to the water filter 3 / 8" tubing. A typical connection using the in- cluded water supply fitting is shown in FIG.2 - A. An optional connection using standard plumbing fittings (not included), is shown in B. A. WATER SUPPLY FITTING B. OPTIONAL PIPE FITTINGS (compression type shown) 1, Close
Краткое содержание страницы № 6
INSTALLATION STEPS STEP 2 - MAKE HOLE FOR FILTERED in porcelain or stainless steel. Special drill bits are made for this. WATER FAUCET Select I of the following places to install the faucet. Be 2. Place plumbers putty around the drilled hole to sure there's room underneath so you can make the prevent water leaks around the faucet. needed connections. - - In an existing sink spray attachment hole. FIG, 3 . 3/4" dia. hole - - Drill a hole in the sink top. • r throunh sink nr - - Drill a hole in th
Краткое содержание страницы № 7
INSTALLATION STEPS STEP 4 - MAKE TUBING CONNECTIONS If tubing other than supplied with the system is used, be sure it is of high quality, exact size and 1. Allowing some slack, measure and cut a length of roundness with a smooth surface. 3/8" tubing to connect between the supply fitting To Disconnect Tubing: Push the collet inward and and the filter system inlet, FIG. 1. Cut the ends of the hold with a finger while pulling the tubing out. tubing square. FIG. 5 Tubing correctly cut and connected
Краткое содержание страницы № 8
USING THE SYSTEM The sink or countertop faucet vends the filtered wa- filtered water faucet ter when opened. It has a hand operated, spring loaded closed lever to prevent waste. You can also keep the faucet open by pushing upward on the lever and locking it against the faucet spout. FILTER CARTRIDGE / USEFUL LIFE / REPLACEMENT FILTER CARTRIDGE LIFE Taste and Odor Cartridges: Many bad tastes and/or odors are removed from water by an activated car- Several variables determine how long a cartridge
Краткое содержание страницы № 9
FILTER CARTRIDGE REPLACEMENT 2. Turn the sump off of the filter head, to the left or CAUTION: Never remove sumps with water pres- clockwise. Be careful, the sump is full of water. Do sure in the filter system. not lose the large o- ring seal. 1. Close the water supply shut-off valve (FIG. 1, Note: A special wrench is available from Sears for re- page 4) to the filter. Open the filtered water faucet to relieve pressure in the system. moving the sump. See the parts list on page 11. FIG. 6 bracket
Краткое содержание страницы № 10
REPAIR PARTS Kenmore Undersink Drinking Water Filter System, Model No. 625,384600 1 I I 11 I 1 I 2 I I ___1 3 lO 6 7 4 8 10
Краткое содержание страницы № 11
REPAIR PARTS LIST ' KEY PART DESCRIPTION NO. NUMBER 1 7160453 Screw, #10 - 14 x 3/4" (8 req.) 2 7182502 Mounting Bracket 3 9006053 Screw, #10 ~ 14 x 1-1/4" (2 req.) 4 7207881 Elbow, 3/8" NPT x 3/8" Tube (2 req.) 5 7156535 Head (2 req.) 6 7161255 Nipple, 3/8" NPT x 1 - 1/2" 7 42-34386 O-ring, 3-3/8" I.D. x 3-5/8" O.D. (2 req,) 8 7156577 Sump (2 req.) 9 7168435 Tubing, 3J8" x 72" 10 7207920 Faucet Adaptor 11 7228536 Tee, Feed Adaptor 12 7228510 Faucet Assembly • 7228528 Owners Manual 42-34360 Sedi
Краткое содержание страницы № 12
UNDERSINK DRINKING OWNERS WATER FILTER MANUAL SYSTEM For the repair or replacement parts you need MODEL NO. Call 7 am - 7 pm, 7 days a week 625,384600 1 - 800 - 366 - PART (1 - 800 - 366 ~ 7278) For in-home major brand repair service Call 24 hours a day, 7 days a week The model number of 1 - 800 - 4 - REPAIR your drinking water filter system is found on the (1 - 800 ~ 473 - 7247) rating decal, on the mounting bracket. For the location of a Sears Repair Service Center in your area When requesting
