Краткое содержание страницы № 1
Touchmonitor User Guide
1937L 19” LCD Rear-Mount Touchmonitor
Краткое содержание страницы № 2
Elo TouchSystems 19” LCD REAR-MOUNT Touchmonitor User Guide Revision B P/N E508220 Elo TouchSystems 1-800-ELOTOUCH www.elotouch.com
Краткое содержание страницы № 3
Copyright © 2009 Tyco Electronics. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Tyco Electronics. Disclaimer The information in this document is subject to change without notice. Tyco Electronics makes
Краткое содержание страницы № 4
Table of Contents Chapter 1 Appendix C Introduction 1 Touchmonitor Specifications ........................................21 Product Description 1 19" LCD Touchmonitor (1937L) Dimensions ............22 Precautions .................................................................1 Regulatory Information 23 Chapter 2 Warranty 26 Installation and Setup 2 Unpacking Your Touchmonitor ......................................2 Interface Connection ...................................................3 Powe
Краткое содержание страницы № 5
C H A P T E R 1 INTRODUCTION Product Description Your new touchmonitor combines the reliable performance of touch technology with the latest advances in (LCD) display design. This combination of features creates a natural flow of information between a user and your touchmonitor. This LCD monitor incorporates a 19” color active matrix thin-film-transistor (TFT) to provide superior display performance. A maximum resolution of SXGA 1280 x 1024 is ideal for displaying graphics and images. Other outs
Краткое содержание страницы № 6
C H A P T E R 2 INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install the driver software. Unpacking Your Touchmonitor Check that the following 7 items are present and in good condition: LCD monitor Video cable USB cable Elo QuickStar t CD Software Serial cable Brackets Touch Tools CD + Quick Install Guide (exclude APR model) *Optional external DC (power brick) Power brick and cables: 12V, 4.16A, 50W-R,
Краткое содержание страницы № 7
Interface Connection NOTE: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 1 3 2 2 5 Adapter Video Cable Serial Cable USB Cable OSD Remote Control Key (option) 1. Connect one end of the power adapter to the monitor and the other end to the connector of the power cord. 2. Connect one end of either the touchscreen serial (RS232) cable or the touchscreen USB cable (but not both) to the rear side of the computer and
Краткое содержание страницы № 8
Product Overview Main Unit Rear View 2-4
Краткое содержание страницы № 9
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows 7 Windows Vista Windows XP Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 Windows 3.1 MS-DOS Additional drivers and driver information for other operating systems are available on the Elo TouchSystems web site at www.elotouch.com. The Elo touchmo
Краткое содержание страницы № 10
Installing the Serial Touch Driver (not applicable to Acoustic Pulse Recognition monitor) Installing the Serial Touch Driver for Windows 7, Windows Vista, Windows XP, Windows 2000, ME, 95/98 and NT4.0. NOTE: For Windows 2000 and NT4.0 you must have administrator access rights to install the driver. Make sure the serial connector (RS232) is plugged into the monitor and an open com port on the PC. 1 Insert the Elo CD-ROM in your computer's CD-ROM drive. 2 If the AutoStart feature for your CD-ROM d
Краткое содержание страницы № 11
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS touch driver from Windows 95/98, follow the directions below: 1 Insert the CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d: and press the Enter key to select the CD-ROM (your CD-ROM drive may be mapped to a different drive letter). 3 Type cd\el
Краткое содержание страницы № 12
Installing the USB Touch Driver Installing the USB Touch Driver for Windows 7, Windows Vista, Windows XP, Windows 2000, ME and Windows 98. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows 98 or Windows 2000 starts the Add New Hardware Wizard, do the following: 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next. 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use Browse to select the \E
Краткое содержание страницы № 13
C H A P T E R 3 OPERATION About Touchmonitor Adjustments Your touchmonitor will not likely require adjustment. However, variations in video output and application may require adjustments to the touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1280 x 1024 at 80k-75 Hz. Use the Display control panel in Windows to choose 1280 x 1024 resolution. Operating in other resolutions will degrade video performance.
Краткое содержание страницы № 14
2 Rear Panel Controls SEL MENU 12 3 4 5 Control Function 1 Menu/Exit Display/exits the On Screen Display (OSD) menus. 2 1. Enter contrast of the OSD. 2. Increase value of the adjustment item. 3. Select item clockwise. 3 1. Enter brightness adjustment. 2. Decrease value of the adjustment item. 3. Select item counter-clockwise. 4 Select Selects the adjustment items from the OSD menus. 5 Power Switch Switches the power of the monitor. Remote OSD Buttons(option) AUTO/SEL DOWN UP MENU 3
Краткое содержание страницы № 15
Controls and Adjustment On Screen Display (OSD) Menu Functions To Display and Select the OSD Functions: 1 Press the Menu key to activate the OSD menu. 2 Use or to move clockwise or counter-clockwise through the menu. Press the Select key, the parameter will be highlighted when selected. 3 To quit the OSD screen at any time during the operation, press the Menu key. If no keys are pressed for a short time period, the OSD automatically disappears. NOTE: The OSD screen will disappear if no
Краткое содержание страницы № 16
On Screen Display (OSD) Control Options Control Description Contrast Increases or decreases contrast. Brightness Increases or decreases brightness. V-Position Moves the screen up or down. H-Position Moves the screen left or right. Recall Defaults Returns the monitor to its default settings. RGB Press or to select 9300, 6500, 5500, 7500 and USER. Only when selecting USER you can make adjustments to the R/G/B content. Press Enter to restore to factory default setting. Exit Exit the menu.
Краткое содержание страницы № 17
Preset Modes To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. If any of these display modes are detected, the monitor automatically adjusts the picture size and centering. When no mode is matched, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 7 user modes. The only condition to store as a user mode is the new display information must have 1 KH
Краткое содержание страницы № 18
Power Power Mode Consumption On <50W Sleep <4W Off <2W We recommend switching the monitor off when it is not in use for a long time. NOTE: Complies to VESA Power Management (DPM) standards. To activate the monitor, press any key on the keyboard or move the mouse or touch the touchscreen. In order for the touchscreen to bring the monitor from the DPM system, the touchscreen function must be fully operational. 3-14
Краткое содержание страницы № 19
C H A P T E R 4 TROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Solutions to Common Problems Problem Suggestion(s) The monitor does not respond 1. Check that the monitor’s Power Switch is on. when turning on the system. 2. Turn off the power and check the monitor’s DC power cord and signal cable for proper connection. Characters on the screen are dim Refer to the
Краткое содержание страницы № 20
A P P E N D I X A NATIVE RESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the LCD touchmonitor, the native resolution is 1280 x 1024 for the 19 inch size. In almost all cases, screen images look best when viewed at their native resolution. You can lower the resolution setting of a monitor but not increase it. Input Video 19" LCD 512 x 247 (CGA) Transforms input format to 1280 x 1024 512 x 256 (CGA) Transforms input form
