Краткое содержание страницы № 1
4-297-824-12(1)
Head
Mounted
Display
Reference Guide
Before Initial Use
Refer to the “Startup Guide” for instructions on
connecting the system, wearing the unit, and completing
initial settings.
HMZ-T1
Краткое содержание страницы № 2
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus Warning (including amplifiers) that produce heat. To reduce the risk of fire or electric shock, do not 9) Do not defeat the safety purpose of the polarized expose this apparatus to rain or moisture. or grounding-type plug. A polarized plug has two To prevent fire or shock hazard, do not place objects blades with one wider than the other. A grounding filled with liquids, such as vases, on
Краткое содержание страницы № 3
However, there is no guarantee that interference will Notice for customers in the United not occur in a particular installation. If this equipment Kingdom does cause harmful interference to radio or television A molded plug complying with BS1363 is fitted to reception, which can be determined by turning the this equipment for your safety and convenience. equipment off and on, the user is encouraged to try to Should the fuse in the plug supplied need to be correct the interference by one
Краткое содержание страницы № 4
Correct Use � Ensure that you are wearing the head mounted unit correctly. Health Precautions – For instructions on wearing the unit, refer to the “Startup Guide.” – To avoid watching with the screens skewed, Age Limitations check screen alignment by referring to the Watching video images or playing games by confirmation screen displayed initially. this device may affect the health of growing – Note that dropping the unit or handling it children. This device should not be used by roughly ma
Краткое содержание страницы № 5
Lens Care � Handle the lenses on the head mounted unit carefully to avoid smears or scratches. If the Precautions lenses become dirty, wipe them gently with a soft lens-cleaning cloth. � Do not use liquid solutions, such as lens- Power Supply cleaning fluid, water, or alcohol-based cleaners. Position the system near the wall outlet used. In case of strange noises, fumes, or smoke from the Cleaning the System system, immediately unplug the AC power cord Clean outer surfaces of the system us
Краткое содержание страницы № 6
HDMI Jacks and Connectors Head Mounted Unit Cord Handling Take these precautions to avoid damaging HDMI Take these precautions to avoid damaging the jacks and connectors. HMD OUT jack or cord connector. � When inserting cables, note the shape and � When inserting the connecting cord, note the orientation of the connector and the HDMI jack shape and orientation of the connector and the on the back of the processor unit. HMD OUT jack on the front of the processor unit. HDMI input and output �
Краткое содержание страницы № 7
Contents Health Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Parts and Controls. . . . . . . . . . . . .
Краткое содержание страницы № 8
Product Highlights Supplied Accessories Wearing the head mounted display, you can Make sure the following items are included watch 3D movies and play 3D games from with the system after purchase. If any items connected Blu-ray Disc™ player and game are missing, contact your Sony dealer or a consoles. local authorized Sony service center. Product highlights are as follows. � AC power cord (2 for Dubai and Saudi Arabian models, 1 for other models) � Enjoy video with impact, simulating the � H
Краткое содержание страницы № 9
� Forehead supporter (3) Type A Type B (thin) (medium) Type C (thick) The type B forehead supporter is attached to the head mounted unit at the time of purchase. � Forehead supporter cover (1) � Reference Guide (this guide) (1) � Startup Guide (1) 9
Краткое содержание страницы № 10
Parts and Controls Head Mounted Unit Headband strap release button Forehead supporter Top headband strap Bottom headband strap Illumination Headband strap release button Control buttons (v/V/ b/B, MENU*) VOL +/– buttons Lens span adjusters 1 (Power On/Standby) button * The MENU button serves two purposes. Press the MENU button to view setting menus as well as to confirm setting changes (when it functions as an Enter button). Lenses Nose pad Connecting cord Headphones 10
Краткое содержание страницы № 11
Processor Unit (Front) HMD OUT jack (HMD Output) Insert the connecting cord of the head mounted unit. PASS THROUGH indicator Power indicator Lit in amber when HDMI Lit in green when the system is pass-through is used. on, and lit in red in standby mode. Processor Unit (Back) HDMI IN jack HDMI OUT jack AC IN terminal (HDMI Input) (HDMI Output) Note � Source signals cannot be passed through the HDMI OUT jack until the HDMI pass- through is enabled (page 22) and the Head Mount system is turned
Краткое содержание страницы № 12
Fitting the Head Mounted Unit The head mounted unit can be adjusted in several ways to ensure a personalized, comfortable fit. For a more comfortable fit, always adjust the head mounted unit before putting it on. 1 2 Nose pad Ear pad 4 3 Attach the forehead supporter cover as desired. 1 Adjusting the forehead supporter Forehead supporters in two thicknesses are Attach the included cover included. Choose the best thickness for your to the forehead supporter. needs, accounting for image focus,
Краткое содержание страницы № 13
� If external light is still distracting with the light For a Comfortable Fit blockers on, dim the room lights or move away from external light. Have the weight of the head mounted unit 3 Further headband strap adjustment balanced between your forehead and the If necessary, you can tighten the lower back of your head headband strap even more by using the Forehead supplied clip to shorten it. supporter Lower headband strap Wear the head mounted unit so that it is Headband strap clip sup
Краткое содержание страницы № 14
Replacing Consumables The following replacement parts are available. �Ear pad (EP-G1) Adhesive backing � Ear cushion � Nose pad Peel the new ear cushions away from the adhesive � Forehead supporter (Type A (thin), backing. When attaching them, align the slit with the ear cushion’s opening. After replacing the ear Type B (medium) or Type C (thick)) cushions, reattach the ear pads. � Forehead supporter cover � Headband strap clip Replacing the nose pad � Light blocker (1 each for the left and
Краткое содержание страницы № 15
Confirming Screen Alignment Confirm screen alignment by referring to the confirmation screen displayed initially after lens span adjustment. Screens on the head mounted unit are described below, with an explanation of how to confirm alignment. The display section of the head mounted unit consists of two small screens, on the left and right. Images on each screen overlap to form a single image. Always check screen alignment by referring to the confirmation screen before use to make sure the s
Краткое содержание страницы № 16
Correct Display For correct display, slide the lens span adjusters as needed so that all three “I” marks and the horizontal line intersect. It is acceptable if the “I” marks and the horizontal line intersect in a position other than the center of the screen. Incorrect Display If even one of the “I” marks and the horizontal line do not intersect, the head mounted unit may have been bent out of shape, or it may be damaged. If this condition occurs, contact your nearest Sony dealer or local aut
Краткое содержание страницы № 17
System Settings Setting menus can be accessed at any time to change or adjust a variety of system settings, such as video picture quality, audio output format, and 3D display format. To view the menus, press the MENU button on the head mounted unit. A Setting category icons Basic Menu Operations B Category 1 Press the MENU button on the head C Setting menu mounted unit. D Current settings in each menu E Summary of the selected menu 2 Press the v/V button to select the desired setting catego
Краткое содержание страницы № 18
Menus Default settings are underlined. Information Identifies input signals (video and audio signals) from the equipment connected to the processor unit. “Unsupported signal” indicates that the input signal is incompatible with the system, and “No signal” is shown when no signals are input. Lens span adjustment Back Returns to the previous menu. Lens span Adjusts the lens span of the head mounted unit to match the adjustment distance between your eyes (interpupillary distance), for an opti
Краткое содержание страницы № 19
3D Display Manually select the display format for 3D content. Available settings vary depending on whether the source signal includes a 3D format identification signal, as follows. For 3D content without a 3D format identification signal Over-Under: Select for top-and-bottom 3D content, with similar images displayed on top and bottom. Side-by-Side: Select for side-by-side 3D content, with similar images displayed side by side. Off: Select to display content in 2D format. For 3D content with
Краткое содержание страницы № 20
Reset Restores all the values (except for values of “Wide Mode,” “Auto Display Area,” and “Display Area” in “Display”) of the selected mode in the “Picture Mode” menu to the default settings when selecting “Yes.” Picture Adjusts image contrast. Brightness Adjusts the brightness of the image. Color Temperature Adjusts image color temperature. Cool: Cool blue color tones. Neutral: Color tones between “Cool” and “Warm 1/Warm 2.” Warm 1/Warm 2: Warm red color tones. “Warm 2” is redder than “Warm
