Краткое содержание страницы № 1
NSR-1000 Series
NSR-1200/NSR-1100/NSR-1050H
st
Version 1.1.1 Release Note 1 Edition
th
Last Modified Date: Dec. 18 , 2009
ⓒ 2009 Sony Corporation
Краткое содержание страницы № 2
Copyright Notice ©2009 Sony Corporation. All rights reserved. This document may not be reproduced, translated or reduced to any machine readable form in whole or in part, without prior written approval from Sony Corporation. SONY CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS DOCUMENT OR INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS DOCUMENT OR SUCH INFORMATION. IN NO EV
Краткое содержание страницы № 3
Index １ Overview...............................................................................................................................1 １-１ Additional features by v1.1.1 ......................................................................................1 Multiple Codecs support .....................................................................................1 １-１-１ １-１-２ Simple Motion Detection support......................................................................
Краткое содержание страницы № 4
４-１-３ Main Window - Search and Play back..............................................................19 ４-１-４ Main Window – Monitoring ..............................................................................20 ４-１-５ Analog Camera Control ....................................................................................21 Alarm Notification / Alarm History..................................................................22 ４-１-６ ４-１-７ Search Window...................................
Краткое содержание страницы № 5
NSR-1000 Series v1.1.1 Release Note １ Overview This release note provides the information for the software of the NSR-1200 / NSR-1100 / NSR-1050H. For the built-in NSR Client (IMZ-NS Series) software, please refer to the release note of the RealShot Manager Advanced included in the client software. １- １ Additional features by v1.1.1 １- １- １ Multiple Codecs support Newly supports multiple codecs for Sony IP network cameras and camera servers shown below. IP network camera (max. 3 cod
Краткое содержание страницы № 6
NSR-1000 Series v1.1.1 Release Note SNC-RX570 v3.10/2.40 or higher SNC-CS50 v2.30 or higher SNC-RZ50 v2.40 or higher SNC-DF50 v1.20 or higher SNC-DF80 v1.20 or higher SNC-DF85 v1.20 or higher １- １- ４ Expansion of supported languages Newly supports Polish and Korean. １- ２ Built-in client software and software tools with NSR-1000 Series NSR-1000 NSR Server Software NSR Client* [RealShot Media File Player Version Series Version Version Manager Advanced (Client)] Version V1.0.0 1
Краткое содержание страницы № 7
NSR-1000 Series v1.1.1 Release Note V1.0.0 1.0.0.26 1.0.0.16 1.2.0.7 V1.0.1 1.0.1.4 1.0.1.4* 1.2.0.11 V1.0.4 1.0.4.6 1.0.4.6* 1.2.1.5 V1.1.0 1.1.0.20 1.1.0.19 1.2.2.4 V1.1.1 1.1.1.7 1.1.1.7 1.2.3.0 *New RealShot Manager Advanced is planned to be released. Please refer to the release note for the RealShot Manager Advanced and Media File Player which are included with RealShot Manager Advanced. The software version of the NSR-1000 Series which is supported by RealShot Manager Advanced is
Краткое содержание страницы № 8
NSR-1000 Series v1.1.1 Release Note １- ４ Support Camera Information Sony Camera Model Name Camera Firmware Version SNC-CM120 v1.02 or higher SNC-CS3 v1.08 or higher SNC-CS10 v1.06 or higher SNC-CS11 v1.06 or higher SNC-CS20 v1.02 or higher SNC-CS50 v2.24 or higher SNC-DF40 v1.18 or higher SNC-DF50 v1.15 or higher SNC-DF70 v1.18 or higher SNC-DF80 v1.15 or higher SNC-DF85 v1.15 or higher SNC-DM110 v1.02 or higher SNC-DM160 v1.02 or higher SNC-DS10 v1.02 or higher SNC-DS60 v1.02
Краткое содержание страницы № 9
NSR-1000 Series v1.1.1 Release Note SNC-Z20 v1.06 or higher SNT-EP104 v1.04 or higher SNT-EP154 v1.04 or higher SNT-EX101 v1.04 or higher SNT-EX101E v1.04 or higher SNT-EX104 v1.04 or higher SNT-EX154 v1.04 or higher SNT-V704 v2.16 or higher Axis Camera Model Name Camera Firmware Version Axis 206 v4.40 Axis 207 v4.40 Axis 207W v4.40.1 Axis 210 v4.40 Axis 210A v4.40.1 Axis 211 v4.40 Axis 211A v4.30 Axis 221 v4.45 Axis 209FD v4.47 Axis 209FD-R v4.47 Axis 209MFD v4.47 Axis
Краткое содержание страницы № 10
NSR-1000 Series v1.1.1 Release Note Axis 214PTZ v4.40 Axis 215PTZ v4.40 Axis 232D+ v4.41 Axis 233D v4.48.1 Axis 241Q v4.30 Axis 241QA v4.30 Axis 241S v4.40 IQinVision Camera Model Name Camera Firmware Version IQeye510 v2.8/6(080313) IQeye511 v2.8/6(080313) IQeye702 v2.8/6(080313) IQeye703 v3.0/2(090521) IQeye705 v3.0/2(090521) IQeye711 v3.0/2(090521) IQeye752 v3.0/2(090521) IQeye753 v3.0/2(090521) IQeye755 v3.0/2(090521) - 6 -
Краткое содержание страницы № 11
NSR-1000 Series v1.1.1 Release Note ２ Important notes ・ The cameras and camera servers listed below have some restrictions at V1.04 firmware. SNC-RH series SNC-RS series SNT-EP series SNT-EX series The following are planned to be solved in a future release (V.1.06 or later). ・ Periodical sending of VMF metadata is not executed.(V11N:520, V11R:735) ・ After the execution of pan /tilt operation, notification of motion detection alarm is no longer issued.(V11R:740) ・ Pan/tilt movement
Краткое содержание страницы № 12
NSR-1000 Series v1.1.1 Release Note ３ Notes ３- １ Installation / System Configuration ・ The NSR-1000 Series cannot connect with the client if the setting for ‘Network Interface for Remote Client’ on the ‘Server Configuration’ is configured as ‘Network3’. Please set ‘Network1’ or ‘Network2’. (VT1:2036) ・ If user changes the time zone setting on the ‘Setup Menu’ in the middle of operation such as schedule recording, scheduled recording setting or scheduled action setting change. In case o
Краткое содержание страницы № 13
NSR-1000 Series v1.1.1 Release Note NTSC Resolution Maximum frame rate CIF(352x240) 480 2CIF(704x240) 240 4CIF(704x480) 120 PAL Resolution Maximum frame rate CIF(352x288) 400 2CIF(704x288) 200 4CIF(704x576) 100 ・ User cannot change parameters about recording settings of analog cameras in the ‘Schedule Configuration’. Please change setting in ‘Video’ tab on ‘Device Configuration’. These parameters are used as recording settings for ‘Schedule Configuration’. ３- ４ Device regis
Краткое содержание страницы № 14
NSR-1000 Series v1.1.1 Release Note ・ "Smooth Scaling" function is available for only one monitor frame which is currently selected. This function is not applied to second display. (VT1:2069) ・ The DIRECT PTZ function is not supported on camera servers SNT-EX/EP series connected to analog cameras. To achieve this function, use the buttons in the Camera Control pane or the remote controller. (V11N:401) ３- ７ Main Window - Play back control ・ The VMF detection frame is shifted from it
Краткое содержание страницы № 15
NSR-1000 Series v1.1.1 Release Note ・ You can select only the one check box in the search results list. Playback is enabled for the selected search result. Exporting is enabled for the selected search result, too. You can protect /unprotect the recordings if their background is turned into blue with the check box selected. (VT1:2163) ３- １０ Device Configuration This section describes precautions on use of camera or setting. For other restrictions or precautions, refer to the User’s guid
Краткое содержание страницы № 16
NSR-1000 Series v1.1.1 Release Note internal value not to over the limitation. (V11N:335) ・ Regarding following cameras, if user use the VMD (Camera) with the codec as MPEG4, the frame rate is limited as 20FPS with NTSC or 16FPS with PAL. If VMD (Camera) is disabled after enabled, maximum frame rate setting becomes available after other resolutions are selected once. (VT1:2016) SNC-RZ50, SNC-CM120, SNC-CS50, SNC-CS20, SNC-DM160, SNC-DM110, SNC-DS60, SNC-DS10, SNC-DF85, SNC-DF80, SNC-D
Краткое содержание страницы № 17
NSR-1000 Series v1.1.1 Release Note ・ The image size of more than QVGA(320x240) is selected, the maximum frame rate is limited at the transmission side as follows: NTSC: 10 fps or less PAL: 8 fps or less ・ If the cameras mentioned below uses the MPEG4 codec with the image size of more than 384x288, the maximum frame rate is limited at transmission side. (V11N:59) SNC-CS50, SNC-DF50/DF80/DF85, SNC-RX530/RX550/RX570, SNC-RZ50 ・ 15(NTSC)/20(PAL) fps or less with the stabilizer se
Краткое содержание страницы № 18
NSR-1000 Series v1.1.1 Release Note values different from actual ones when making configurations for the cameras/camera servers shown below (V11R:483) SNC-RH series SNC-RS series SNT-EP series SNT-EX series In this case, perform the adjustment of the detection area size while viewing on the frame in the configuration screen. ・ When parameters in the Video setting tab are changed while recording, it will affect the recording like the followings. (V11N:155) Manual Record
Краткое содержание страницы № 19
NSR-1000 Series v1.1.1 Release Note registration. (V11N:461) ３- １１ Action Configuration ・ N/A ３- １２ Schedule Configuration ・ If user sets the schedule record of following cameras with the ‘Automatic Record Configuration’, the codec setting shall be not MPEG4 but JPEG. If user needs to change the setting, please select the codec on ‘Video’ tab in the Device menu. (VT1:1690) SNC-CM120, SNC-CS20, SNC-DF85, SNC-DM110, SNC-DM160, SNC-DS10, SNC-DS60 ・ If user changes the ‘Storage Sett
Краткое содержание страницы № 20
NSR-1000 Series v1.1.1 Release Note between start and stop time of recording is too long or the time displayed on the monitor frame jumps suddenly. Please change the system time after stopping to record. (VT1:1659) ・ ３- １３ User Configuration ・ If user set the username and password except English one byte characters, [-], and [_], user cannot log on with the username and the password. In this case, please log on with administrative privileges and change the username and the password.
