Руководство по эксплуатации Kenwood KDC-136

Краткое содержание страницы № 1

CD-RECEIVER
KDC-136
INSTRUCTION MANUAL
© B64-3693-00/00 (MW)

Краткое содержание страницы № 2

Contents Safety precautions 3 Accessories/ Installation Procedure 14 Notes 4 Connecting Wires to Terminals 15 General features 5 Installation 16 Power Selecting the Source Troubleshooting Guide 18 Volume Attenuator Specifications 19 Audio Control Audio Setup Bass Boost Speaker Setting Clock Display Subwoofer Output Theft Deterrent Faceplate TEL Mute Tuner features 8 Tuning Tuning Mode Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting CD player features 10 Playing CD F

Краткое содержание страницы № 3

Safety precautions Lens Fogging 2WARNING When you turn on the car heater in cold weather, To prevent injury or fire, take the following dew or condensation may form on the lens in the precautions: CD player of the unit. Called lens fogging, this • To prevent a short circuit, never put or leave any condensation on the lens may not allow CDs to play. metallic objects (such as coins or metal tools) inside In such a situation, remove the disc and wait for the the unit. condensation to evapora

Краткое содержание страницы № 4

Notes • If you experience problems during installation, The marking of products using lasers consult your Kenwood dealer. (Except for some areas) • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work CLASS 1 with your model and in your area. LASER PRODUCT • Characters in the LCD may become difficult to read in temperatures below 5 ˚C (41 ˚F). The label is attached to the chassis/case and says • The illustrations of the display and the panel

Краткое содержание страницы № 5

General features Release button Control knob Clock display ATT indicator Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required Display Each time you press the button, the Attenuator Tuner "

Краткое содержание страницы № 6

General features Audio Control Audio Setup Setting the Sound system, such as Volume offset. 1 Select the source to adjust Press the [SRC] button. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio item to adjust Press the [VOL] knob. 3 Select the Audio Setup item to adjust Each time you press the knob, the item to be Press the [VOL] knob. adjusted alternate

Краткое содержание страницы № 7

Removing the Faceplate Speaker Setting Press the Release button. Fine-tuning so that the System Q value is optimal The faceplate unlocks, allowing you to detach it. when setting the speaker type. € 1 Enter Standby • The faceplate is a precision piece of equipment and can Press the [SRC] button. be damaged by shocks or jolts. • Keep the faceplate in its faceplate case while detached. Select the "STBY" display. • Do not expose the faceplate (and the faceplate case) to 2 Enter Speaker Setting m

Краткое содержание страницы № 8

Tuner features Control knob Band display Frequency display AUTO indicator ST indicator Preset station number CRSC indicator Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning mode Press the [SRC] button. alternates between the modes shown in the table Select the "TUnE" display. below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "

Краткое содержание страницы № 9

Station Preset Memory Frequency Step Setting Putting a station in the memory. Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM 1 Select the band band 9 kHz. Push the Control knob towards [FM] or [AM]. 1 Turn the power OFF 2 Select the frequency to put in the memory Press the [SRC] button for at least 1 second. Push the Control knob towards [4] or [¢]. 2 Switch the frequency step 3 Put the frequency in the memory While pressing the [1] and [5] buttons, press the

Краткое содержание страницы № 10

CD player features Control knob RDM indicator REP indicator SCN indicator Track number IN indicator Track time Playing CD Fast Forwarding and Reversing When a disc is inserted Fast Forwarding Press the [SRC] button. Hold down toward [¢] with the Control knob. Select the "CD" display. Release to resume the playback. ⁄ Reversing • When a CD is inserted, the "IN" indicator is ON. Hold down toward [4] with the Control knob. Release to resume the playback. Pause and play Press the Control knob.

Краткое содержание страницы № 11

Track Search Selecting the song you want to hear. Push the Control knob towards [4] or [¢]. Track Repeat Replaying the song you are listening to. Press the [REP] button. Each time you press the button, the Track Repeat turns ON or OFF. When the Track Repeat is ON, the "REP" indicator is ON. Scan Play Playing the first part of each song on the disc you are listening to and searching for the song you want to hear. 1 Start Scan Play Press the [SCAN] button. "SCN" indicator is ON. 2 Release it w

Краткое содержание страницы № 12

Menu system Control knob Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting beep sound during operation, etc. ⁄ functions. The Menu system basic operation method is • When other items those applicable to the basic operation method above are displayed, their setting explained here. The reference for the Menu items content chart is entered. (Normally the setting listed at and their setting content is after this operation the top of the chart is the original setting.

Краткое содержание страницы № 13

In Standby mode In FM reception Manual Clock Adjustment CRSC (Clean Reception System Circuit) Temporarily have reception alternate from stereo to 1 Select Clock Adjustment mode mono to reduce multi-path noise when listening to Push the Control knob towards [FM] or [AM]. the FM station. Select the "CLCK" display. Display Setting 2 Enter Clock Adjust mode "On CRSC" The CRSC is ON. Press the Control knob for at least 1 second. "OFF CRSC" The CRSC is OFF. The clock display blinks. 3 Adjust the hou

Краткое содержание страницы № 14

Accessories/ Installation Procedure Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 1 2. Make the proper input and output wire connections for each unit. ..........1 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 2 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. ..........2 7. Reconnec

Краткое содержание страницы № 15

Connecting Wires to Terminals Rear left output / Sub Woofer left output (White) Rear right output / Sub Woofer right output (Red) FM/AM antenna input Fuse (10A) Wiring harness If no connections are made, do not let the wire come out from the tab. (Accessory1) When using the optional power amplifier, Power control wire (Blue/White) connect to its power control terminal. P.CONT Depending on what antenna you are using, connect either to the control Motor antenna control wire (Blue) terminal of

Краткое содержание страницы № 16

Installation non-Japanese cars Japanese cars 1 Refer to the section and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each Firewall or metal support side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N T/N N T T: Toyota cars N: Nissan cars Bend the tabs of the mounting sleeve with a screwdriver or similar utensil 8 mm and attach it in pla

Краткое содержание страницы № 17

Removing the hard rubber frame Screwing the Faceplate on the Unit If you want to fasten the faceplate to the main unit 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. so that it does not fall off, screw in the provided Upper the frame and pull it forward as shown in screws in the holes shown below. the figure. Accessory5 Lock Catch Accessory2 Removal tool 2 When the upper level is removed, remove the lower two locations. € ⁄ • Never insert the screw

Краткое содержание страницы № 18

Troubleshooting Guide Some functions of this unit may be disabled by The messages shown below display your some settings made on this unit. systems condition. E-04: The CD is quite dirty. The CD is upside-down. ! Cannot display the user of System Q. The CD is scratched a lot.

Краткое содержание страницы № 19

Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (50 kHz space) Maximum output power : 87.5 MHz – 108.0 MHz : 45 W x 4 Frequency range (200 kHz space) Full Bandwidth Power (at less than 1% THD) : 87.9 MHz – 107.9 MHz : 22 W x 4 Usable sensitivity (S/N = 30dB) Speaker Impedance : 9.3dBf (0.8 μV/75 Ω) : 4 – 8 Ω Tone action Quieting Sensitivity (S/N = 50dB) Bass : 100 Hz ±8 dB : 15.2dBf (1.6 μV/75 Ω) Middle : 1 kHz ±8 dB Frequenc

Краткое содержание страницы № 20