Краткое содержание страницы № 1
www.skylinkhome.com
Total Protection Alarm System
MODEL: SC-10
CUSTOMER SERVICE
17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3
Tel : (800) 304-1187
Fax : (800) 286-1320
AUG, 2005.
101A073-001
Email : support@skylinkhome.com
PAT. 6243000B1
Краткое содержание страницы № 2
SKYLINK TECHNOLOGIES INC. ADDITIONAL ACCESSORIES Your Guide to the Smoke Sensor (SS-433) - Detects sound frequencies of existing smoke, Total Protection Alarm System carbon monoxide alarms - Activates Security Control Panel (SC-001) or MODEL: SC-10 Emergency Dialer (AD-433S) when the preset sound frequency is detected - 9V alkaline battery included Audio Sensor (AS-433) - Detects alarm sound from existing security system alarm; sends signal to Dial-Alert. - Eliminates need for monitoring
Краткое содержание страницы № 3
ADDITIONAL ACCESSORIES TABLE OF CONTENTS Security Control Panel (SC-001) PACKAGE CONTENTS....................................................................... 4 - Four alarm modes (Day, Night, Away, Chime) - Four zones, each zone controls up to 6 OVERVIEW........................................................................................5 devices - Reliable design with microcontroller PLANNING YOUR HOME SECURITY NEEDS.......................................6 - 110dB siren INSTALLATION Aud
Краткое содержание страницы № 4
PACKAGE CONTENTS ADDITIONAL ACCESSORIES All materials required for installation are included in this package: Additional sensors and transmitters as well as add on accessories are avail- able to work with your security system. One Audio Alarm (AA-433) - includes Motion Sensor (PS-434A) 1 antenna (installed) - Monitors area in a 110 degree ARC and up to 1 AC adapter 40 feet away from the sensor 1 9 volt alkaline battery - 9V alkaline battery included Two sets of Door/Window Sensors (WT-433)
Краткое содержание страницы № 5
OVERVIEW BATTERY MAINTENANCE Congratulations. You have just purchased one of the most reliable and up- DOOR/WINDOW SENSOR BATTERY to-date Wireless Security Systems on the market today. Skylink’s innovative rolling code technology provides increased security and trouble free wireless Each Door/Window Sensor operates on a 12 volt alkaline battery that is in- connections. It guarantees that the Audio Alarm will only recognize radio side the transmitter. The sensors come with the batteries already i
Краткое содержание страницы № 6
BATTERY MAINTENANCE PLANNING YOUR HOME SECURITY NEEDS Before you begin to install your Security System, analyze the premises to The SC-10 Security System comes with five batteries that may have to be determine your security needs. If your premises has two entrances, you replaced at some point: may want to put a Door/Window Sensor on each door. You may choose your main door and a window that is hidden by some bushes and is not One 9 volt alkaline battery for the Audio Alarm visable from the stree
Краткое содержание страницы № 7
DELETE SENSORS AND TRANSMITTERS INSTALLATION Installation is done using the screws included. For your convenience, we You can not delete one sensor/transmitter from the Audio Alarm at a time. have also included wall anchors and a template to aid in the installation of You must clear all the sensors and transmitters that are currnetly com- the Audio Alarm and the Door/Window Sensors. municating with the Audio Alarm, then re-program the ones you want to keep. How to use the template to help in the
Краткое содержание страницы № 8
INSTALLATION PROGRAM SENSORS AND TRANSMITTERS Screwing the unit to the wall TO THE AUDIO ALARM 1. Unscrew the two triangular hanging tabs The two Door/Window Sensors have been preprogrammed as well as the key- located at the back of the Audio Alarm. chain transmitter at the factory to communicate with the Audio Alarm. If after testing, there is no communication or you have purchased additional Door/ 2. Turn them around and slide them back into Window Sensors or Motion Sensors, (option), follow t
Краткое содержание страницы № 9
ACTIVATE AND DEACTIVATE THE SYSTEM INSTALLATION Now that the system is installed and the sensors are communicating with 1. Position the transmitter be- the Audio Alarm, it is time to learn how to arm and disarm the Audio Alarm. side the door/window frame on the wall using either two sided The only way to arm and disarm the Audio Alarm is via the Keychain Trans- tape or screws. If you are using mitter and Keypad Control (option). screws, first pry off the back plate with a small screwdriver and K
Краткое содержание страницы № 10
TESTING YOUR SYSTEM LIGHTS AND SOUNDS Before you learn how to use your security system, test to make sure that LIGHTS the Door/Window Sensors and the Keychain Transmitter are communicat- ing with the Audio Alarm. TESTING THE DOOR/WINDOW SENSORS ON light lit -power is being sent to the Audio Alarm. Turn on the Audio Alarm, (slide the button on ALL BELOW SCENARIOS INCLUDE THE “ON” LIGHT LIT the bottom of the unit to “ON”), allow 30 seconds for the Audio Alarm to warm up. The red “ON” LO BATT light
