Краткое содержание страницы № 1
MD-RECEIVER
KMD-671R
INSTRUCTION MANUAL
B64-1609-00 (EN)
Краткое содержание страницы № 2
Contents Before use Menu settings Safety precautions ........................................................................3 Menu System .............................................................................21 Touch Sensor Tone.....................................................................22 General features Manual Time Adjustment............................................................22 Power.....................................................................................
Краткое содержание страницы № 3
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION You cannot connect the unit directly to the following CD automatic changers. For users To prevent injury and/or fire, take the To prevent damage to the machine, who want to use older changers with the following precautions: take the following precautions: unit, follow the directions below according to • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative the type of changer you own: locked in place.
Краткое содержание страницы № 4
Safety precautions Handling Mini discs Lens Fogging NOTE • The MD shutter is designed so that it cannot In cold climates, there may be a period after • If you experience problems during be opened. If forced open, the cartridge will you turn on your vehicle's heater when the installation, consult your Kenwood dealer. be damaged and use of the MD will no lens that guides the laser beam used in your longer be possible. If the shutter has been MD player fogs up. If this happens, you • If the unit do
Краткое содержание страницы № 5
General features Power Turning on the power: Press the SRC button. NOTE Turn the power on before carrying out the following procedures. Turning off the power: Hold down the PWR OFF button for one second or more. Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. ATT indicator Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator o
Краткое содержание страницы № 6
General features Switching Modes Loudness This function amplifies low and high tones when the volume is Switching Modes: turned down. Each time you press the SRC button, the mode switches as The LOUD indicator lights up, when the loudness function is follows: on. Turning Loudness On/Off: Tuner mode Hold down the LOUD button for one second or more to switch the loudness on and off. MD mode External disc control mode 1 External disc control mode 2/AUX mode Audio Control Setting Standby mode Adjust
Краткое содержание страницы № 7
• You can call the following settings with this function; bass "Bass" : Adjust the bass level. centre frequency, bass level, bass quality factor, bass Setting values: - 8 – + 8 extension, treble centre frequency, and treble level setting. Their setting values are different depending on the setting of the mobile preset plan mode. "Treble" : Adjust the treble level. Setting values: - 8 – + 8 Mobile Preset This function allows you to adjust the setting that is recalled with the sound coordinate
Краткое содержание страницы № 8
General features NOTE TEL Mute • The faceplate is a precision piece of equipment and can be Shut down the audio system temporarily whenever an incoming call is received. damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached. NOTE The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit • Do not expose the faceplate or its storage case to di
Краткое содержание страницы № 9
Tuner features Tuning 1 Press the SRC button repeatedly until the tuner mode is obtained. "TUNER" is displayed only when the tuner mode is selected. 2 Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3. Press the AM button to select the MW and LW bands. 3 • Auto Seek Tuning Press the ¢ button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies. • Preset station seek tuning Press the
Краткое содержание страницы № 10
Tuner features NOTE Station Preset Memory • If the RDS station currently tuned to is transmitting no text Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button. whilst the Radio Text Display mode is turned on, "NO TEXT" will appear in the display. Whilst awaiting reception, "WAITING" will 1 Select the band/ station that you want to have stored. be displayed. • The £ indicator lights whilst the clock is displayed. 2 Hold d
Краткое содержание страницы № 11
RDS features RDS (Radio Data System) RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received. RDS (Radio Data System) stations also transmit frequency data for the same statio
Краткое содержание страницы № 12
RDS features 17. Finance (Finance) Programme Type (PTY) Function 18. Children’s programmes (Children) Conduct auto seek tuning only on those stations with selected 19. Social Affairs (Social A) kinds of programmes. 20. Religion (Religion) 21. Phone In (Phone In) 1 Hold down the PTY button for one second or more. 22. Travel (Travel) "PTY" is displayed, and the Programme Type Selection (PTY) 23. Leisure (Leisure) Mode entered. 24. Jazz Music (Jazz) If you make no key input in 30 seconds, the mode
Краткое содержание страницы № 13
Cancelling Programme Type Function During Its Operation: • Holding the TI button down for one second or more when the Press the PTY button for one second or more. TI function is on in the disc control mode results in a change to the frequency display of the traffic information station for five seconds. Traffic Information Function Presetting Volume for Traffic Information/News You can listen to traffic information. If you are listening to Preset the volume level to be used for traffic informatio
Краткое содержание страницы № 14
RDS features MD/External disc control features Radio Text Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: 1 Press the CLK button to display the Radio Text. 2 Holding down the CLK button for one second or more results in one scrolling display of the text. To scroll automatically: 1 Press the CLK button to display the Radio Text. The text will be displayed i
Краткое содержание страницы № 15
When a unit equipped with an O-N switch is to be 2CAUTION connected, please also see the instruction manual of this Do not attempt to insert an MD into the slot if another one is unit. already there. Set the O-N switch to "N". "N"-operation will be set. "N"-operation: • The disc title and track title of the CD text can be displayed. • The disc name will be displayed when the name has been registered to any connected unit with the Presetting Disc Playing Other Disc mode Names function, or when th
Краткое содержание страницы № 16
MD/External disc control features Reversing Disc Play: Switching Display for Discs Hold down on the 4 button. Switch the display that appears whilst discs are playing. Release your finger to play the disc at the point. NOTE Switching Display for Discs: Each time you press the CLK button, the display during disc You cannot use reverse play between tracks depending on the play switches as follows. model being connected. Instead, the reverse play function is cancelled when it reaches the beginning
Краткое содержание страницы № 17
Disc Search (Function of disc changers) Track Scan Search forwards or backwards through the discs in a disc Successively play the beginning of each track on a disc until changer until you reach the one that you want to listen to. you find the track that you want to listen to. Making a Reverse Disc Search: Starting the Track Scan: Press the DISC– button to display the desired disc number. Press the SCAN button. "Scan/T-Scan ON" is displayed and the Each time the button is pressed, the displayed d
Краткое содержание страницы № 18
MD/External disc control features NOTE Disc Scan (Function of disc changers) Random play is cancelled when you eject the disc. Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D.SCN button. "D-Scan ON" is displayed and the first 10 seconds of each disc are played, in the order in which they are loaded on the changer. Magazine Random Play (Function of disc changers) The disc number currently being heard
Краткое содержание страницы № 19
1 Press the CLK button to display the disc title or the track title. 2 Holding down the CLK button for one second or more results in one scrolling display of the titles. To scroll automatically: 1 Press the CLK button to display the disc title or the track title. The titles will be displayed in one scrolling display. NOTE When the disc or track to be played changes, the title is displayed in one scrolling display. 2 Holding down the CLK button for one second or more results in one scrolling disp
Краткое содержание страницы № 20
MD/External disc control features Operations can be followed again from Step 2 at a time such Presetting Disc Names(DNPS) (Function of disc changers) as this, and the characters to be input are selected using the Store the names of discs to be displayed when played. procedure described below. Press the DISC+ or DISC– button to display the desired 1 Play the disc whose name you want to preset. character. Besides the alphabet (capital letters only) and NOTE numbers, you can choose the following ch