Краткое содержание страницы № 1
KD-S5050
KD-S10
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
KD-S5050/KD-S10
DIRECT TRACK ACCESS
78 9 10 11 12
DIRECT TRACK ACCESS
78 9 10 11 12
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
INSTRUC
Краткое содержание страницы № 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Краткое содержание страницы № 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................. 2 SOUND ADJUSTMENTS .................... 12 How to use the MODE button ...................... 3 Adjusting the sound ................................... 12 Turning on/off the loudness function ............. 12 LOCATION OF THE BUTTONS ......
Краткое содержание страницы № 4
LOCATION OF THE BUTTONS Control panel o ; a sdf g h Display window j k 5 12 34 6789 FM DIRECT TRACK ACCESS CD SSM AM MO RPT RND MODE SCM t p q w e r y ui 1 (Standby/On Attenuator) button Display window 2 +/– button o SCM (Sound Control Memory) indicator 3 LOUD (Loudness) button ; CD indicator 4 SEL (Select) button a Band indicators 5 Loading slot FM1, FM2, FM3 6 AM button AM 70 (Eject) button s Tuner reception indicators 8 CD button MO (Monaural), ST (Stereo) 9 FM button d RND (Random) indicator
Краткое содержание страницы № 5
BASIC OPERATIONS 1 FM CD SSM 2 AM MO RPT RND MODE SCM 3 Turning on the power 4 Adjust the sound as you want (see pages 12 – 14). 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment. When you select a source in step 2 below, the To resume the previous volume level, press the power automatically comes on. You do not have button briefly again. t
Краткое содержание страницы № 6
RADIO OPERATIONS FM CD SSM AM MO RPT RND MODE SCM To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Manual search Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). 1 Select the band (FM 1 – 3, AM). FM FM1 FM2 FM FM1 FM2 FM3 FM3 AM AM AM AM Lights up when receiving an N
Краткое содержание страницы № 7
Storing stations in memory 3 Tune in to a station you want while “M” (manual) is flashing. You can use one of the following two methods to store broadcasting stations in memory. Press ¢ to search • Automatic preset of FM stations: SSM (Strong- stations of higher station Sequential Memory) frequencies. • Manual preset of both FM and AM stations Press 4 to search FM station automatic preset: SSM stations of lower frequencies. You can preset 6 local FM stations in each FM band (FM1, FM2 and FM
Краткое содержание страницы № 8
Notes: Manual preset • A previously preset station is erased when a new station You can preset up to 6 stations in each band (FM1, is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex: Storing an FM station of 92.5 MHz into the during battery replacement). If this occurs, preset the preset number 1 of the FM1 band. stations again. 1 Select the band (FM1 – 3, AM) you want to store F
Краткое содержание страницы № 9
CD OPERATIONS FM CD SSM AM MO RPT RND MODE SCM Playing a CD Note: When a CD is inserted upside down, the CD automa- Insert a disc into the loading slot. tically ejects. The unit turns on, draws a CD and starts playback To stop play and eject the CD automatically. Press 0. CD play stops and the CD automatically ejects from the loading slot. Note on One-Touch Operation: • If you change the source, the CD play also When a CD is already in the loading slot, pressing CD stops (without ejecting the CD
Краткое содержание страницы № 10
Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) You can play back all tracks on the CD at random. To fast-forward or reverse the track 1 Press MODE to enter the functions mode Press and hold ¢, while playing a CD. while playing a CD, to fast 2 Press RND (Random), while still in the functions forward the track. mode, so that the RND indicator lights up on the display. Press and hold 4 , Each time you press the button, CD ra
Краткое содержание страницы № 11
Prohibiting CD ejection You can prohibit the CD ejection and can lock a CD in the loading slot. While pressing CD, press and hold 0 for more than 2 seconds. CD “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected. To cancel the prohibition and unlock the CD While pressing CD, press and hold 0 again for more than 2 seconds. “EJECT” appears on the display, and the CD ejects from the loading slot. The CD-in indicator flashes 11 EN09-11-KD-S5050[J]f 11 7/17/
Краткое содержание страницы № 12
SOUND ADJUSTMENTS Adjusting the sound 2 Adjust the level You can adjust the sound characteristics to your To increase the level. preference. 1 Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: Ex.: when you adjust “TRE” (treble) Indication To do: Range Note: BAS Adjust the bass. –06 (min.) Normally the + and – buttons work as the volume (Bass) | control. So you do not have to select “VOL” to adjust +06 (max.) the
Краткое содержание страницы № 13
Recalling the sound modes Using the Sound Control When “SCM LINK” is set to “LINK ON,” Memory (SCM) select the source. You can select and store a preset sound adjustment FM suitable to each playback source. (Advanced SCM) CD Selecting and storing the sound modes Once you select a sound mode, it is stored in AM memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the Each time you change the playback source, the
Краткое содержание страницы № 14
Storing your own sound 5 To turn on/off the loudness function. See page 12 for details. adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 13) to your preference and store your own adjustments in memory. • There is a time limit in doing the following procedure. If the setting is cancelled before you 6 Press and hold SCM until the sound finish, start from step 1 again. mode you have selected in step 1 flashes on the display. 1 Call up the sound mode you want Your adjustment mad
Краткое содержание страницы № 15
OTHER MAIN FUNCTIONS Cancelling Advanced SCM Setting the clock – SCM LINK 1 Press and hold SEL (Select) for more than 2 seconds. You can cancel the Advanced SCM (Sound Control “CLOCK H”, “CLOCK M”, “SCM LINK” or Memory), and unlink the sound modes and the “LEVEL” appears on the display. playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. 2 Set the hour. LINK ON: Adva
Краткое содержание страницы № 16
Selecting the level display 3 Select the desired mode — “VOL 1”, “VOL 2” or “OFF”. You can select the level display according to your preference. When shipped from the factory, “VOL 2” is selected. VOL 1 : Shows the volume level indicator. VOL 2 : Alternates “VOL 1” setting and illumination display. OFF : Erases the volume level indicator. 4 Press SEL (Select) to finish the setting. 1 Press and hold SEL for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears on the display.
Краткое содержание страницы № 17
Attaching the control panel Detaching the control panel 1 Insert the left side of the control panel You can detach the control panel when leaving into the groove on the panel holder. the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. 2 Press the right side of the control 1 Unlock the control panel. pa
Краткое содержание страницы № 18
MAINTENANCE When playing a CD-R Handling discs Before playing back CD-Rs, read their This unit has been designed to reproduce CDs instructions or cautions carefully. and CD-Rs (Recordable). • Use only “finalized” CD-Rs. • This unit is not compatible with MP3 discs. • Some CD-Rs may not play back on this unit because of their disc characteristics, and for Center holder the following reasons: How to handle discs – Discs are dirty or scratched. When removing a disc from – Moisture condensation on t
Краткое содержание страницы № 19
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • Sound cannot be heard The volume level is set to the Adjust it to the optimum level. from the speakers. minimum level. Connections are incorrect. Check the cords and connections. • This unit does not work at The built-in microcomputer While holding SEL (Select), all. may have functioned press (Standby/ incorrectly due to noise, etc. On Attenuat
Краткое содержание страницы № 20
SPECIFICATIONS AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Type: Compact disc player Front: 45 watts per channel Signal Detection System: Non-contact optical Rear: 45 watts per channel pickup (semiconductor laser) Continuous Power Output (RMS): Number of channels: 2 channels (stereo) Front: 17 watts per channel into 4 Ω , Frequency Response: 5 Hz to 20 000 Hz 40 Hz to 20 000 Hz at no more than Dynamic Range: 90 dB 0.8% total harmonic distortion. Signal-to-Noise Ratio: 95 dB R
